Subwoofers / Speakers

Wassup guys I'm doing a port swap in the next few days and trying to get opinions/suggestions. I have a box 39.5h x 41.5w x 13.5" d (outer dimensions) with a port 12h x 10w x 40" l which gives me 6.8 cubes tuned at 31hz with 17.75 port per cube. It's just not giving me as much pressure I want on lows. The new port is 12" o.d. Pvc (11.5" I.d.) x 36" l with 2-4" external. This will give me about 8 cubes tuned at 29 with 14.25 p.p.c. I don't have anything to lose, and I'm not building a new box until I design a 6th. So what are your thoughts on what I have now?

I'm assuming this is the sound of the XCON bottoming out? I had little power on the sub before and just got a new Crescendo amp (1500.1) and decided to see what the excursion looked liked and noticed it started making a noise that sounded like it was hitting the backplate. Visually I guess I was thinking the XCON was going to move a little more before bottoming out. The thing still moves quite a bit. Just thought I would see what you all thought. I only did this for the second time in the video, and won't be doing it again.

open for all suggestions

i need opinions which is gonna hit the high medium and lows the best

what type of amp should i run to these speakers ?

Hi guys, A tinsel lead broke on one of my mid last week. It's impossible to solder properly, to fix that. So I'm looking for a replacement. My budget is not high enough to just buy a new set like the Focal KR2 or KRX2. I was thinking about a set of JBL gti 608 but I can't find one. I will buy a mini-dsp as soon as the funds are ok, maybe for Xmas. Until then, I will use the passive filters for the Focal tweeters, and I want a set of mids (not to be used on the passive filters). Crossover at 80 or 100 Hz on my Pioneer head unit. I saw a lot of people talking about ScanSpeak speakers, like the Illuminator or the Revelators. Can that be a good choice ? I'll change …

i am just wondering guys i am gonna get a sundown zv3 and wondering if i run scv2000d amp to it would that be good for my first sub ? any help would be awsome

Hello all and thank you in advance for any help. I am in need of a new woofer for an existing enclosure. It currently has an Image Dynamics ID-8 v3. I am interested in the Sundown E-8 line but have been unable to get ANY help thru Sundown. I am open to other brand drivers as well. This is a budget/low power system in my daughters first car. Will be have approximately 250 watts supplied. Needs to be a 2 ohm load. Enclosure is .76cu' GROSS volume. 3/4 mdf construction. Port is 2" x 11" sch 40 PVC, flared on outlet end. Port can be modified in length only. Woofer and port rear facing in 2013 Honda Civic sedan. Thanks again for any help in suggestions of box modeling if…

Hey Guys I have a few questions with a new stereo install on my 2014 F350 super duty crew cab. I currently have 2 phoenix Gold D2 12's with a Phoenix gold elite.1 amp. The subs output 1600 RMS each and the custom box build is at 34hz. I have custom cut my door panels to fit 5 1/2" focal speakers and tweets using 1/4" MDF. The back seat is a 60/40 split bench and the backrest all the way across has been removed to accommodate the sub box into the cab to provide more room. I have installed 100% dynamat into the 4 doors, the roof and the back panel. I have two AGM batteries under the hood that operate the diesel truck. There is also two factory alternators that will now be g…

jay-cee I hope you love that Icon like I did when I was running 2 15's.

The sub box is 2.0 cubic ft per sub tune at 34hz with Sundown sa 12. I've heard that with tunning below 35hz your lpf should be around 80hz or below! Any truth to that? And shouldn't the lpf slope play a part say if 80 hz was best is that with a 12db slope or 24db or does that even mater?

Would odd numbers sound better than even numbers or louder 1 vs 2 3 vs 4 5 vs 6 I no cone area plays apart but if all was on the same amp...what would the out come be.

got 1.5 cubes for sealed / need advice on subsafter some careful considerations, i cant do a ported box.too much space. i can do 1.5 cuft SEALED after displacement. i got the amp to push these @1000w rms. ive been going back and forth with different configurations for about a week now, my head hurts . my paycheck came today and i wanna buy a sub before i run outta money. so now im looking for a sealed configuration for a stereo integrity mag v3. OR two sundown audio e10 v2's so... 1- does a mag v3 work well sealed @ 1.5 cuft ? the subs web site recommends 1 cuft. will i get more output with the extra .5 cuft ? 2- which will give me deeper bass ? the e-10's or the si mag…

I have a 2014 Ford Explorer sport. 2 Fi team 18s, (2more added later) ported 6th order, 7cuft per sub tuned to 33Hz and will be using a crescendo BC encore 12k. My center ch I can fit a 6.5 pwx or 2 FT1 super tweets. Any recommendations for the doors? I got room for 2-3 8" mids per door (if I customize/deaden and seal the doors) and 2 FT1 tweets. Daily driver Currently 1 370a singer alt and a 200 stock alt with 1 xs D3100. (Will be replacing the stock alt with another 300 plus singer) Headunit = kenwood DDX9702s Thanks!

I need a little advice. I recently sold a sub on Craigslist. Icon 12 D2. It has literally sat in my garage for over a year. When I tested the coils back in May of 2014 I got a solid 1.8 on each side. I haven't played the sub once since. The new owner tested the coils at 2.4. When wired at 1ohm he's getting 1.8. Can anyone help US understand what's going on? Is it something to worry about? Can a sub sitting do this to the coils?

Hey All, Trying to figure out how I want to setup my daily driver and would like some input from some experts (as I am not 1). I have 2 12" XCON D1's and 2 Orion 2500d's. The Plan: Wire each XCON in parallel to provide a .5 ohm load The 2500d's are not strappable but they should be stable at .5 with my electrical So the thing is, I did some testing on 1 of my 2500d's and was getting approximately 2200 rms on stock electrical in my friends truck (which was probably only putting out around 12V or so). By wiring my subs down to .5 ohm's I feel that the amp will be able to supply at least 2500-3000k rms to each sub. Would this be way too much for each 12" XCON (I don…

I'm buying a pair of FI N3's and can't find any info on them as far as enclosure size or any specs in general. Can't search since it's 4 letter minimum search so any info on them will be greatly appreciated. I'm undecided on wether they will be built into 15's or 18's, depending on how much box volume they require. Thanks guys

Got my SA-12 back in October and finally getting around to a box build. Fired up Torres. Single SA-12 on a SQ 750w. Look good to go? Or any thing I need to change? =Going in Volvo V50 wagon, sub/port firing towards hatch.

I can't get the dustcap to stay in place,what am I doing wrong? Rubberized glue didn't hold,CA didn't hold,5 min epoxy didn't hold.i ruffed the surface of dustcap w/emery cloth. Time to step back and punt! Also the first two weeks after the recone I had to keep volume down my amp would protect on me. Now I can full tilt w/no issues,confused on that also.

I just got a new car recently a 2006 ford fusion. And I already have a aftermarket touch screen in it. I just want to put door speakers in the front and the back. But I got no idea what kind. In my Taurus I had mTX front speakers and they sounded pretty good. Any suggestions. Keep in mind I don't have much money do to the fact I got a kid on the way. So what are your guys opinion on good quality door speakers

OK so subsonic filter how many hz do you guys set below tunning?

I'm looking for a sub to go with my amp its a da7232 old school. Last time I used it was on a nightshade 12 v2. The setup wasn't optimal so I'm not sure on its performance. The amp is dual mono 2 ohm. Suppose to put out around 1k per channel not bridgable obviously. It will be going in the back of a suburban behind the 3rd row. So I have a decent amount of space but not unlimited. Any suggestions will be appreciated.

http://www.youtube.com/watch?v=2crK8iVAc0I&feature=plcp

What's up everyone. I've never had an American made subwoofer before and I'm interested in these two. I was locked set on the ssa zcons. Because of the tons of great reviews people give ssa,everyone races about the icons. I have a pair of re sxxv2 and the rms is similar to them, so I'm looking to upgrade so I was looking at the xcon's. But then I figured I might as well pay the extra $90 and get a zcon lol. Then after researching, ready to go through a it it, I notice the aa mayhem. The mayhem is $10 cheaper and 250watts more. And it looks crazy beefy. So I was thinking what's the deal with that. I got a taramps 5k to go on either or. And I'm trying to get L…