Subwoofers / Speakers

Hey im getting a Toyota Camry to start driving and im wondering which sub or subs yall would recommend. The smallest i want to go is 12. Open to any suggestions.

i dunno if im retarded but i didnt see it on the site? whats the mounting depth for a Rl-i 10"?

Aight. So I am looking over the course of the next year to find my dream sub. I'm not dissatisfied, I will just be upgrading. Now I have been looking around and there are so many options, and there are so many subs I do not know about. Anyway... details... -15" sub... budget of ~500-600 dollars -NOT an SPL sub, but I want it to handle around 3000-3500 watts all day -Fs under 30 hz (low resonance) -Xmax of 25+mm (above average excursion) -Good motor strength (average-above average) -Good mech. handling (I'll put in as big a box as I can) -It'll be ported for sure. Probably tuned around 28-30 hz. Now a fully loaded BTL w/ everything is 470 shipped. I figured my budget is…

right now i have a AQ hd3 12 that i am running with 1800 watts at 2ohm. the box it is in is 2.5 tuned at 32hz. i am wondering if a sundown nightshade ran at 1ohm with 2400watss goin to it in the same box would be louder? this is a DD not no fart machine.

I got one for ya. here's my sd page I broke one from making the dustcap tear the surround I'll take moved pix of them with a battery sometime so you get an idea of how far they actually move. once you start scrolling down you'll see it. Later, T EDIT: Forgot to link yall after noticing I could just attach pix anyhow you can see some of my other toys there. I have my 18" RE MT on there. http://www.sounddomain.com/memberpage/412297/3

Here it goes... At work, we have a Definitive Supercube subwoofer (awesome little things) that has been having problems. It powers up but will have little to no output. That's beside the point. I took it apart and checked the coil to see if it was open. I took my meter and it measured just under 30 ohms. We talked to the Definitive rep and he said that was right. My question is, what advantages are there to using a high impedance speaker like this? Keep the impedance spike higher in the FR range so the true sub bass isn't affected? I also figured that the plate amp would have to be designed to match the speaker also so parts cannot be properly swapped out. Just a …

seps - dls amps - rf t6004, rf t1500bd subs - dc lvl 4 with 5 coil

I want the Sundown Audio SA-15. Two of them. And a SAZ-2500D. One of it. Will I overpower the subs? I know, i know, the specs say 600rms but I want to hear some experienced people tell me how hard they bang and if they can handle more. Just looking for some nice project ideas.

Couple days ago i purchased two bl 12's fully loaded. I also bought a aq2200d. Are these a good match. Would giving 1100watts rms to each sub be okay? Just if you guys wanted to no i have a 2010 altima, big 3, xs d1200 in the front, and my voltage does not drop below 13.5 when the subs are on. The box design is from tech support on this site. 3.2cuft tuned to 30hz. According to the site the bl's need to be in a box between 1.5-2.5 cuft, so im good on that. I currently have one bl12 on a sundown 1200d yea it blew out, never going back to the shop again. NOw for my second build i no what im doing. So anyway will giving 1100wrms to each bl be fine?

hi guys. looking for pair of 12" subs that fit the following criteria. must be able to take 1200 rms daily--must be brand new--must be dual 2 ohm--and finally must be able to fit in a ported box 4.5 cf or less after displacement.

What are the best speakers for under $300? JVC and JL are my top choices so far. Any suggestions, comments, or insights would be greatly appreciated

Whats involved with making a component set? Somebody told me I could find the parts I'd need on Parts Express... If somebody could explain the crossover would help me. I don't understand which I'd need.

I'm trying to hunt down an 8” that is closely comparable to an Rl-i 8 since there aren’t any new to be had.

I'm hoping to upgrade from my 10" 500w rms alpine type r in sealed box this summer. I'm planning to buy a 12" and put it a ported box. I'm interested in the gcon but my main concern is power. I've read that more power won't always make a huge difference in spl. I know the gcon isn't out yet but i'm looking for an estimate of how much louder a gcon 12 should be over a dcon 12. If there isn't that much of a difference I wouldn't mind going with a dcon and not to have to worry about using too much power when putting in an amp for the speakers. As far as I know, type r's are pretty decent subs. Would a 12" 300w dcon in a ported box even be an upgrade from a 10" 500w type r in…

I decided to drive my Magnum to work today...... I actually had to bail out of the car .. the fumes from the former material was burning my eyes...LOL there is a hole burnt clean thru

Adjustable Voice Coil Bias System Dual Differential Spider Design Multiple Gap "Balanced Flux Motor" System Enhanced Piston Area Surround Termination and Frame Design Integrated Voicecoil Heatsink Assembly Insanely High Excursion and SPL Capability Peak Power Handling: 4000 watts Sensitivity: 88dB 1w/1m Weight: 79lbs!!!!!!!!!! :thud:

ok guys i was wondering if a single RE SX 12 will we good for a starter system... i already have a 2.0cf box ported and tuned to 32hz.. will this be a good first setup?

to bad I can't afford one of these now would do sweet under my bed. good news is I should have 400lbs of subs coming to my house soon

Hey all. I can get a really good price on Memphis car audio. I did listen to a pair of 10" M3's and they sound great. I was wondering what you all thought about them and how you would compair them to SS or other brands? THanks for any info BC

I have a Fi 15inch ssd d-2 on it's way. I have a sundown1200d, at 1ohm can i send 600watts to the sub?i have 4ga and a stock alt and battery.this is why i wana send unded 800watts.i had a audio q2.5 and at 580 watts iwas seeing volt drops at 12.9.

I have 300 watts x2 @ 4 Ohms. So power won't be a problem. But I wanted a three way setup because I really want to fill that MIDBASS category if possible.

I have a PowerBass XS15Dv.2 that I just picked up and only had 500Watts RMS pushing the Damn thing and the positive on one side & neg. on the other blew!(Voice Coils) What would cause this? I bridged my Phoenix Gold XS2500 and had the Sensitivity & Bass controls at about half way up! I hooked up the sub in Parrallel config. How can you blow the voice coils of a 1000W RMS Sub if you hook up 500W to it! Can someone explain! Also how can I get it fixed? Thanks

Hey, everyone. Im looking into getting either AA Mayhem 15 d2 or AA Havoc 18 d2 or d1 depending on how much power it can take daily. Amp is Hifonics BRZ2400.1D and I read that the Havocs have a power handling of 1250W rms. I wanna know if I can power the Havoc with the full 2400W or if I would need to wire to 2ohm for 1700W. Also, would either of these numbers be too much power for daily use? The car it is going in is a pontiac vibe and has about 24cuft of cargo area for the box so I dont think Ill have problems fitting the box in the car. But, Ive also read that certain setups are better for certain cars and idk how to tell since Im quite new at this. If anyone knows a p…

Sold the sa15s and got a pair of Fi SSDs and must say i'm slightly disappointed. The lows are far better with the fis but the sundowns were far "louder" than the fi's. The box is build to spec and I tuned the amp up and they just can't keep up with the sundowns. I think i'm going to try to trade the ssds and cash for a pair of level 4s.

funky-pup/ does anyone remember these.....LOL