Subwoofers / Speakers

how do people take the sub out of the basket without wruening the subwoofer i seen it in one of steve meades builds and i have seen it in others

I found an old JL 10 for sale, didn't see a number on it. Looks like it was reconed or something but ok job. Motor is near as big as the hole it would go in, its heavy. Kind of well used looking but new JL dustcap and maybe foam on it, it is all black and stamped looking frame....any idea of value? Not sure what I could do with only one. It has thick paper gasket on top edge that is torn up some, the rest is not bad.

Has anyone ever use speaker baffles for their door speakers and did you notice an improvement in sq?

I live in Johnson City Tn and am very interested in hearing a pair of XCON subs. Not a lot of bumpers in this area so was wondering if anyone on here or anyone you know has a pair that i could drive to hear. Im willing to drive a couple hours away for the demo as my wife has insisted i hear these awesome subs before purchasing them This may need to go to general audio section, sorry if so.

So, I knew starting to read more on car audio again would get me in trouble, so.... Looking at convincing my wife to let me maybe get an 18" sub for myself for christmas. This will be going into my extended cab chev s-10. Will be using a JBL GTO 601.1 amp to push it (600 watts at 2 ohms) (reason for the amp is, I already have it, and if I can even manage my wife to OK the purchase of a new sub she will never go for ok'ing a new amp as well) Looking at doing a 6 cubic foot enclosure slot ported tuned around 32 Hz Was looking at either the Ascendant audio Chaos 18 (dual 1 ohm coils) or possibly the Fi SSD 18 (again dual 1 ohm coils) Both call for up to 800 watts rms, an…

Current set up is as follows: 2 AA Poly mids mounted in each door. WELL deadened. 80-2500Hz Vifa XT25 mounted about 12" above mids. HP around 2800Hz Xovers done via a Helix amp. I'm very happy with how it sounds, but you know how the upgrade bug is. I'm considering going 3 way with a dedicated midbass to replace one of the poly mids. Something like this: Peerless SLS 8" 60-250Hz Poly mid 250-2500Hz Vifa 2800+ I would also need to get an electronic xover and am not sure what yet as I haven't researched them. I'm looking for more punch/kick up front, mostly for 80's rock/metal, so lots of kick drums. But I don't want to lose the incredible midrange output for guitars, etc…

Does anyone know why ID never made one of these? Its seems stupid that they havent, seems like it could have been a good money maker if they would have done it years ago when they made the 10 and 12.

We just added a newletter subscription to our web site. The text and pictures on the entire site will change soon and there will be text on the main page about the newsletter subscription. If anyone wants to stay abreast on what's happening with us, just sign up for the newsletter. The forum will be updated with pics and other stuff, but newsletters always go out first.

Pulled the trigger on some sweet ass xcon 15s! Cannot wait. Have to say thanks to everyone on the forum for just being awesome in general. Special shout out to Aaron and Alton. Couldnt have been any more easy to work with. We shall call the build "SEXCONS" as per my wifes instructions (oh yeah!)

here are some quick pics of the tc9 that I reconed with an FI Q coil. new coil is dual 1.4's and three stiff spiders

Don't laugh too hard, but I bought my 2nd Gen SI D2 12" sub so long ago, I forget how I was going to wire it. What Ohm do I wire this at? I ask because I may move the amp I was originally going to use to my midbass and need to find a new sub amp for this sub.

I have 2 mags 15" that is about to be installed in my explorer. Each mag is going to be fed by a hifonics 1500. What kind of box should I build for these two sub? How big and what should it be tuned to. I listen to rap mostly so I was thinking 35 hz but how big should I make it?

Is it just me or is Nick one sexy mofo?

I know these subs are designed more for SPL, but which of these subs has better SQ? Which can get louder and move more air? Thanks for any advice.

Does the crossover in a component speaker system affect the way the mid-bass woofer plays? Reason I ask is because I'm currently using only the mid-bass driver of a component system and it doesnt seem like the speaker is playing as good as it did when the crossover was in use.

I was looking for a 10 inch sub for my 96 accord, and was interested in the digital design 3510 sub, but have never actually heard it. Im looking for a sub that is slightly more "compact" than my 12s, but still delivers the bass that I crave. Any opinions? pros/cons, etc.? Any suggestions towards another choice will be gladly accepted. Will be running this off of a JBL GTO1201.1 II. Thanks in advance.

setup will be going in a 97 explorer ran off of a single american bass 500.1 @ 1 ohm...1250 watts per woofer. Objective....loud as chit, uncomfortable, cant breath, cant see, daily driving setup to demo at shows. Option A Sub up port back 10.62 cubes after all displacements 3 6" aeros @ 20 inches long each 30 hz tuning Option B Sub up port back 10.35 cubes after all displacements 4 6" aeros @ 20 inches long each 35 hz tuning I think option A will work very well but 30 hz tuning might miss a lot of songs apart from bass mekanik and the odd really low rap song. Any thoughts? thanks

So lately one of my friends insists that we "have a concert" every time were in my car because hes never really heard any good speaker setups and mines the best hes heard, but all I have are kicker ssmb6 midbass on ~55 watts and 3.5 coaxials in pods on the a pillars run off the HU. The sound impresses him but if its going to be a concert I want a louder more full sound. I dont know much about what component sets are good and I was hoping for some input as to what I should get, assuming a passive component set will be a decent improvement. SQ isnt the most important thing, I really just want a loud clear full sound. This is going in my honda accord and I only have abou…

I have a buddy that had someone put his system together and they put in RF P1 10's. How much better would it be to recommend a DCON instead (SQ and SPL)? One thing also, is the P1's are single 4 ohm and he has a 600d1 or something, so my guess is 600rms at 1ohm. right off the bat, I would think the DCON's would be better, because he can get them in dual 4's, and run it at 1 ohm. (he does have 2 10's) Any experiance would be greatly appreciated. I don't want to look like an idiot if I gave him the wrong answer.

i dont know much about car audio but i have decided to buy a 18'' btl but i do not know what options to get i will never go to a competition i just want a street banger for the next 3 months i will be using an alpine v12 series 1000.1 rms at 2 ohms and will upgrade to a 2000.1 at 2 ohms i will be using this sub on a ported box every day so what options should i get?

Hello, I'm in Alberta. Been looking at a few manufacturers in the USA. I was planning on two AudioQue HDC3 18s.. but its gunna cost over $800 dollars to get the two to me, including the cost of the woofers. Mach5 is alot closer. I heard about Mach5 from a guy on CanadianCarAudio, who suggest one of the MLI-65 for a computer subwoofer. I've been looking at the MJM-18. I really do wish I had a larger budget. Original plan was 6. But the cost of the woofers themselves, wiring, alternator, batteries, and the rest of the audio gear I need for my truck... its gunna go over my budget.. I have a budget of at least 1200 for my whole stereo, but probably not more than 1500, but may…

kinda a general question but what is a good sub to run off 400-500 wts rms. want decent sq. i will put it in sealed or ported which ever works best. budget no more than $250

In search of an original MJ18 4 ohmer, please PM me if you have one for sale. Might even consider a blown one if you have that...

Can anyone help me on what box volume and dimension could i use to get the most output on my Fi ssd full option? Going to power it with a sound magus x1502 1500w at 1ohm. The car is a mitsubishi adventure, a minivan...and what box tuning you could advise,i want to have deep low bass but sometimes i also listen to house/club music...thanks

Alright to start off I'm new here and I am in no way imposing the w7 to be the end all sub woofer. Well it seems like everyone around me is trying to run the mojo of the w7. I want to sound better and get louder than my uncle. He has a 12w7 ported at 2.25bubes at 32hz on a pdx1000.1 this in my opinion is loud enough. I plan on getting two 10' q's. I am unsure on what to power them with. Probably a sundown 1500d. I can put the subs in boxes about 1 cube net I am not sure on what to tune it to. But Do you think I will be able to out slam his setup?