Subwoofers / Speakers

i want to get orion h2's, but i dont know what size/what amps/how many/etc.? i was talkin to denim about it and he said to talk to hccafan about it cause he knows alot about orion. i was thinkin either 3 12's or 2 15's but i dont need to give each sub 2000 watts rms, i was thinkin maybe 1000 each on the 3 12's or 1500-2000 on the 2 15's. thanks.

Hey fellas, I was wondering if anyone has some more specs for the DC Level 4 12" I was looking for: Outside Mounting Diameter (for flush mount) Driver Displacement (cu. ft) Recommended Tuning (Fb) Recommended Port Area Recommended Port Length If anyone has any of these specs available it'd be a great help. Thanks, Steven

my friend is wanting to get a new sub and doesnt wanna spend alot of money probably no more than 150 on the sub and it needs to be around 600 watts rms. the sub will be more for sq than anything i found this one but not sure about it. http://www.sonicelectronix.com/item_13201_...dio+KMX-10.html if yall have any ideas to throw out there go ahead let me know and it needs to be a ten inch. thanks

http://cgi.ebay.com/ebaymotors/ATREND-15LSV-SINGLE-15-SPL-VENTED-SUB-BOX-ENCLOSURE-_W0QQcmdZViewItemQQhashZitem5add78bbd0QQitemZ390262733776QQptZCarQ5fAudioQ5fVideo#ht_3372wt_1166 Any reason why I shouldn't get this? Single 15" SPL vented subwoofer enclosure Designed specifically for SPL - This box will make your sub louder than other enclosures Dimensions in inches: 31" Width x 15.5" Height x 19" Top depth x 19" Bottom Depth Volume per sub: 3 cubic feet Machine precision cut mounting holes 3/4" heavy Dusty Construction Multi layers of high-grade glue ensure long life and no air leaking out High quality spring loaded terminals Dado end panels Heavy duty 51 pound box! Mou…

I have a sundown saz 1500d v3, and was hoping to run all sundown equipment soon, so the question is would a 1500d push two sa 15s nice or would they seem ' under powered'. Would most likely have the box be 3.5 cubes each @ 35 hz

i have ~ 8 cft of space and 2 kw rms of power. my goal is low and loud bass response. for sub id like to run either 1 15 or 2 15s. now winisd shows me that 1 15 l7 (example) in 6 cft space is exactly as loud as 2 15 l7 in the same box. does this represent the truth? hard to believe 1 15 is as loud as 2 of them. i thought 2 15s would push way more air.

between these three subs... which would u do? two of these infinity's? these two alpines? these two diamonds? remember, these are going into my wife's car, now going to be pushed by this hifonics amp lemme know....btw due to price (staying under $300 shipped, her budget, not mine) these are the only choices unless u know of a pair of 10's brand new, either svc 2 ohm or dvc 4 ohm that can handle 375 wrms a piece, and will ship the pair for under $300...then those are my only choices.. btw, i'm starting to go infinity(love the look), diamond, then the alpine later.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Hey everyone. I came across this forum through caraudio.com and thought i would try to get some help here. Just like the title says...I have an AA Avalanche in that box right now with 1000 watts and it's just not loud enough. My budget is about 300 (cheaper the better). I have an eD nine.1 to power so i can give it 1200 clean watts at 1 ohm, and i would like to use the same box. I know it is tuned more for SQ but it is still a decent size. I was looking at the Fi BL, SI Mag, and TC-3000 (although that one cannot be wired to 1 ohm). The BL and Mag are really intriguing me after doing some research... (Also, where can i get Mags and how much? I can't seem to find that info …

Planning on pairing one or the other with the L1 and taking advantage of the group buy. My question becomes which is going to be better for my application? I'm quite sure that I can fit the L3 in the A-pillar, not so sure about the L4. The tweet will likely be an A-pillar install either way. The L3 would be a pretty simple install the L4 not so much. I'm not sure that I need the extra top end of the L4 since it will be paired with a tweet. Through the midrange freqs (say 250hz-10k) is the L4 worth the extra money and install hassle? I should be able to get the L3 much more on-axis if that matters. Thanks for any inputs.

I'm planing on building a new sub box and was wondering what would be the best way to get the mdf cut? Box will be 36" wide X 18" high X 16" deep I know I have to take 1.5" off some measurement but what would be the best way of doing it? I will be getting the mdf sheet cut at Home Depot. Thanks EDIT: Does this sound right" Front/back 36" X 18" top/bottom 36" X 14.5" sides 14.5" X 16.5" and the port is also 16.5" high I just having a hard picturing it in my head.

I was on ca.com and saw a set of these for sale and I want to get them. But one of the tweeters is blown. Can I order a new set of tweeters from madisound or somewhere and hook them up to the pioneers passive crossover? Or would it sound bad because the crossover isn't made for those tweeters? I can't go active with them because I only have a 2 channel Sundown but for the price the guys asking I wanted to give these a shot.

Alright so is the btl N2 most like the previous generation btls? if not what is most like the old btls?

Hey guys lookign for some insight. I have a 2002 lincoln ls, i was looking at (4)10 inch BL subs or(1) 15 inch sub built to specs both set ups on a saz-1500 or saz-2000. Budget not really an issue. The enite trunk is going to be used no spare tire. Which one Would you choose? Recommendation also welcome

Im thinking about building a box for my magnum D2s which would be about 2.5cuft a sub and the box will be tuned to 34hz. Is that too much? Do you think i need to have a 2.0cuft box tuned to 32hz? Im not doing any competitions, but i listen to ALOT of rap. And i want something that will make my subs pound insanely yet hit EVERY note of bass while doing it. I dont want the subs to bottom out or nothing when the bass drops too low. So is the 2.5 ok or should i reduce it to 2.0. And what about the tuning frequency?

I've got a '94 single cab sonoma that all this is going in. This is my second stereo, last one got jacked. Amp: Crunch PowerZone 4-Channel Amplifier (PZi175.4). Sub: Dayton RSS265HF-4 10" Reference HF Subwoofer 4 Ohm 350w RMS. Tweets: Morel MDT-12 1-1/8" Neodymium Tweeter 80w Mids: Dayton Classic DC130-8 6" 50w Crossover: Dayton XO2W-3K 2-Way Crossover 3,000 Hz Box will be roughly 2 cubes ATLEAST. Still working on the design in a ported box. Opinions?

I really wana see some mags in action. ANY where in michigan is fine. With in 200 miles, i wana see them in action before i buy them im very indicisive with my money, if you live any where near TC michigan, which is up north on the lower p, let me know.

What's the main differences b/t the two? Just a lil curious. Are they completely different?

Thank you for reading my post. I am a 20 year veteran of car audio system building, though my involvement has drastically decreased since becoming a Dad. It's time to install a system in my 2012 Scion xB. I have a Rockford Fosgate T1001-bdcp amp that does ~750 watts @4 ohms or ~1100 @ 2/1 ohms. Most importantly, I am an old school basshead who still listens to real bass music from the early 90s (Techmaster P.E.B., DJ Magic Mike, Bass Patrol, etc.). My bass CD collection is a source of pride for me. Anyway....I am looking for a single 12" or 15" woofer that will give me the 20-25 Hz notes that I crave. My maximum external dimensions are something like 22" wide, 17" …

I have a box desighned for two 12 dcons could two12 skars work in same box? dcons not decons

So I've been running my RLp 15 for 7 years now with no problems. Thing still rocks. But I've grown tired of my current box and amp and would like to change things up a bit. Currently I'm running a sealed enclosure with the sub inverted along with a Directed 1500D. I'm looking at a new amp and another sealed enclosure but this time I'm going with a standard box with the sub installed with the basket inside. My question is this: Should I continue to run the sub at 1 ohms or should I wire it to run at 4 ohms? The reason I ask is back when I bought my sub I was chatting with Mike about my box design and amp and he told me I should really pair the sub up with a good 500-600 wa…

When did this happen? It looks like the website was just updated recently. Any chance there are some of the 'old' model ixl 10.2.2 and 12.2.2 with the lower FS kicking around to be purchased? With my application sealed is a lot easier (yes the recommended ported sizes are small, but you still have to get a port in there). I can't do 2.5cubes so the 15.2.2 is out of the question.

Ok I am majorly confused about about how to do a good front stage. Just to give you an idea I am planning on getting a 18" BTL with the SD3000D in a 8 cubic foot box. I have boon looking at all kinds of speaker and I want to get a set of 6.5" components with 1" tweeters. I will probably go passive for now because it is easier and im not that SQ oriented. I mainly want something that will keep up with the sub. So what is all this 2-3-4 way stuff it has me so confused. What is better and why? Also I have 6x9's in the rear deck but I have heard rear fill sounds like chit with subs. So would it be good to get like a set of 8" or 10" midbass drivers to mount back there?

Hi guys, i was wondering if you can give some suggestions for a sub that my friend could use with the info i got from him... - small maybe 10" or even 8" - musical sounding sub - can go loud abit i think? - good for sealed enclosures - good for 500W only or maybe less for efficiency - max of $300 if possible i think the reason for small is he plans to put in in the corner of the trunk. behind the tail lights. and if im not mistaken, he needs it for .7 or less cubes after displacement. he was thinking of putting flat subs/slim subs but i advised him to wait, and ill try to get more suggestions for i think slims subs output would not be enough for him, but if you can sugg…

Would the 15 work ok in a smaller than 3.0 cu ft box? The price is very right, and i have heard the SQ rivals the IDQ, but i don't know if i want to fit that large of a box. That would be nearly double the size of my 1.6 ported 12RLP. So if i went sealed i could save some space, but would that be any louder than my ported RLP? Also, would i lose SQ to the RLP?

Ive got 2 15'' d2's and about 7 cubes to work with if that. Should I port it or just go ahead and seal it off? Im running a jbl 1200.1 to them and its in a hatchback. I want all the spl I can get.