Subwoofers / Speakers

She's beautiful, she's huge, and she can MOVE! http://i248.photobucket.com/albums/g...y/DSC_0001.jpg http://i248.photobucket.com/albums/g...y/DSC_0002.jpg http://i248.photobucket.com/albums/g...y/DSC_0003.jpg pron: enjoy (I did) http://www.youtube.com/watch?v=hs5u0...e=channel_page http://www.youtube.com/watch?v=jKYkN...e=channel_page

ok so i have a JBL GTO601.1II sub amp and an RF HE2 15 looking for a better sub. any suggestions? considering the SSA Icon15D2

I'm looking for recommendations for a sub. I've got a .82 cubic ft custom sealed fiberglass enclosure and a Polk Audio PA400.1 which does 300w at 2ohm - actual output could be a little higher from what I've read. I'm looking to spend under $200. I like to have some "thump" but accuracy is far more important. I had a ID12d2v2 from about 5 years ago but that one's done. Here's my list so far: SSA DCON AA Assassin RE Adutio SR JL AUdio 12w3 Soundsplinter RL-i Polk Audio MM1240d Any help would be appreciated.

i know this will vary greatly from vehicle to vehicle, but is there a general rule of thumb for sub/port placement as far as trunked cars being the loudest? i've always had setups in suv's, which usually take better to sub up, port back configurations. i have a 99 subaru impreza RS, and was wondering what would give me the best output as far as which way the sub fires, and which way the port fires. give me any, and all of your input. personal experience, theories, etc...

i currently am running 2 12w7s in a sealed box and am not as satisfied with it like i was in the beginning, doesnt hit the lower end like i would like, but this may also be due to the type of box it is in. Should i make the trade for the 15 re xxx and $100, or just sell them for straight cash. opinions?

Hi I am getting close to getting all the pieces to start my build and now it is down to the door speakers. It will be in a explorer and ran off a Kicker zx650.4 I have decided to get 2 pairs of MLI-65s for the front and rear. Does anyone know some tweats that could match them good? Price is the main concern but am willing to spend an extra dollar if it's worth it. Also would I need a crossover and could someone point me to a few worth the price. Thanks for any input! Car will/has Pioneer avh4000d Roll of raamat 2 12" SSDs 08 kickerzx.2500.1

This is setup temporarily until I make another box. Still working on another 4th order I just wanted to see how this huge port performs. I posted a buildup of the port over on caraudio.com. It's 10.75" internal diameter and it flares out to 15.5 on the large flare and I don't remember the smaller flare. Finally got the electrical system where it needs to be...HO alt, 3 new batts, and new amp. Here's the pics! It moves a ton of air. Juice Box is an awesome song to play

Well, This Might Determine The Choice For My Dad's Truck. If Anyone Can Inform Me If The AA Havoc Has The Sandwiched Tinsel Leads Also, That'd Be Great.

ok, so im going to need new speakers... if i have $250 right now, what do i do? i want to upgrade the fronts first, but i need to do the rears, then amp them... i dont like the idea of no rears and what speakers for rear? 6x9s http://www.cadencestore.com/ProductCart/pc...p;idproduct=236 for front, what for rear to match? and then amp?

Hey guys, anyone happen to have the t/s parameters of the Ascendant Havoc 12" in dual 1 ohm coil config? I got them at the end of the summer of '08, so they have the new cone, but they are not the new Dual 2's obviously, so I can't use the same t/s to design an enclosure for them . Thanks guys!

Mark or anybody that can answer, I have an mj18 that recently got a hole knocked in the surround and the dust cap crushed in, the speaker still sounds good but I would like to fix these issues if possible. Can I resurround the mj and put a new dustcap on it? How much for the parts, we have resurrounded speakers before just not the MJ. Thanks!

We're Thinking Of A eD 13Av.2 In My Dad's '08 F-250 Super Duty, Any Input On This Woofer Is Glady Appreciated. Musical Tastes Are Rock And Country. Maybe Some Rap Sometimes To Show It Off.

I haven't heard much about these subs and are curious about them for a friends vehicle. Was just wondering how these subs are and how they compare to other subs in there power range? Like the RE Audio SR's, DC Sound Lab Level 2's, SS RL-i series and AA Assassins? My friend is looking for a good pair of 12s to power off a 600 watt Kicker amp. He wants it to get loud and sound clean in a ported enclosure. The Dcons look promising but I haven't heard much feedback about them since they were released.

Since I have a son my girl wants a car seat in both cars I have to take the 15s out the back seat and I won't be able to do my dp21 I'm thinking about 3 10s facing into the car and porting the back deck. I'm about to pick up a crunch 3000d and its going into a 02 Pontiac sunfire. The set up is going to be used more for everyday use tuned in the low 30s. the trunk is and will be sealed off from the trunk and the subs behind the back seat with about 5in of space Right now I'm thinking of fi Qs, ssd, aq2.5s or dc lv4 can u think of anything better? I'm going to use 2 6in Euro ports on the back deck where the 6x9s used to go. Do you think it will sound good or should I use 2…

Link Why 3 baskets? Anyone ever seen anything like this?

Hi guys, Question if you run one D1 subwoofer an one D2 sub on the same sub amp will one get more power to it ?

I have a Regular cab dodge... I have narrowed down to 2 options 4 sundown E 8's off a sundown 1000 or 1 12" Fi BL off a sundown 1200 Looking for LOUD SOUND QUALITY This will be going with a active setup with hertz hsk 165's, alpine 9887 and a sundown 100.4 What would you guys recommend? 1 12'' or 4 8's

I'm looking into redoing my system and I am having a tough time choosing. What would be the best combination for a daily setup no comps just loud daily: (2) 15" AA Havocs 320 Amp alternator 1 Sundown 3000d 1 kinetik 2200 or 2400 or (2) 15" Fully loaded bl's 320 Amp alternator 1 Sundown 3000d 1 kinetik 2200 or 2400 or (2) 15" Fully loaded btl's 320 Amp alternator 1 Sundown 3000d upgrading to 2 later 1 kinetik 2400

I have noticed over the past few days my SPL15 was starting to rattle. I just pulled it out today and noticed the dust cap is coming loose on one side. Do I need to use any sort of special glue to fix? I was thinking of using some superglue. I also was considering epoxy but it dries too slow. Thanks

thinking about putting two fifteen inch Bl's or Q's in , but I'm limited for space . I'm working with 17hx40wx28d going to be using 4" flare ports, question is should i keep the box right around 8 cubes or drop the size down a little to around 6 cubes and what should i tune it to 30 or 37 hertz? the car is a 2005 sonata box will be subs back ports back any help or suggestions would be appreciated.

Looking to get good sounding 6x8's for my 2004 mountaineer like to spend around $150 a pair.... I have a SAZ1500 and an RE audio MX15 factory 6x8's is not cutting it... Ideas please

I decided to temporarily put in one of my SE12's in at 2ohms on my T3002 in mono mode. Giving it approx. 800 watts. The box is 2 cubes after all displacement. For the port I doulble up a pc of 3/4" MDF and glued a pc of 4" pvc pipe through 1 layer and router a 1/2" radius on the top layer to make a homemade aeroport. The length overall of this port is 13". I don't believe I am right in thinking the tuning is at 32. Can someone double check me on this. Also am thinking about shortening the lenght of the port to get about a 35 hz tuning. This is just a temporary daily box for me to have something till it warms up. But I listen to all kinds of music so I needed some…

Why is it that the IXL 10 and 12 inch subs have 1000 watt power handling ratings but the 15" and 18" are rated at 800 watts??

Installed 2 of my 3 lvl2 10's today , on 800rms. my last setup was a single typeR and the one before that was 2 rf t112d4's, all i can say is wow better than both by far..Ran them for an hour they barely got warm Point of story u make a great sub , What ever u doing keeping doing it cause you're doing it right! Next setup def gonna be some lvl4's.

So I was bumping my ssd yesterday on my home stereo receiver and I cranked it up a little bit to let the sub move a little bit. I realized it was making noise and immediately turned it down. The noise was like a vibrating slap, its kinda hard to describe. The slap was only audible on certain frequencies. I was probably putting a good 100 or so watts to it and I guess my receiver started clipping it. Will clipping make your sub make a noise? If its not that I was thinking maybe bottoming out? I don't really know whats causing it but I'm hesitant to put it on 800 watts.