Subwoofers / Speakers

Just wondering is these 2 subs could handle an AQ3500 (older model 3500@1ohm)?? If so, what would be the optimum box for them to be ok with this power?

ive been looking around, and i cant find hardly any info on the re subs... can anyone toss me a link. also on where to buy them

I've been too busy to put my mag 15 in my 3.7cf tuned to 27hz box that my friend built.I am picking the box up in 2 days and was wondering,when i asked my friend the size of the box he built and he told me 3.7cf, but when i asked him if it's tuned to 27 hz he said theres 25sq inches of port.Does that sound like it's tuned to 27hz?

What is the loudest and boomiest sub under 1000 watts?

..iam interested into Kicker solo-baric L7 15" ...i will be usin a 1800Wrms amp ..and i thought.. a 5cube box at 36Hz.. ...what do u guys think about this SUB ...(can it handle 1500W,whats with the build quality and this is not SQ sub-right?)

Ok guys I got 2 10'' JL w0's (old ones), they beat pretty good in my truck (ext. cab sonoma), but it is time for bigger and better things. My buddy has 3 12'' JL w0's (also old ones) that I am buying, but 2 of them are 4ohm and the other is 8ohm. I have 2 amps to use. I'm not sure if I should run all 3 12's ( 8ohm on one amp and 2 4ohm on the other), or run the 2 4ohm 12's with my 2 4ohm 10's. Either way I will build a sealed enclosure with each one in its own chamber. I'm just open for suggestion. Got alot of stuff and don't know what to do, any help is appreciated. Thanks!

Ok first off no flaming me please. My current setup is two 12" shallow mount Pioneer subs (sealed down firing) and a Hifonics Gladiator amp...wired 750rms @ 2 ohm. My problem is lately I've noticed a smell which I can only assume is voice coil, and I've been feeling like my output is not what it use to be. When I first had this installed it was hitting very hard and clean. My rear view mirror looked like it would fall off, and my ears would ring it was so low. Very clean, no bottoming or rattle and I loved it. But the guy who installed it set the gain by ear and I always thought he just turned knobs to appease me for whatever reason instead of setting where it should be…

As far as Fi subs are concerned should I run 3 10" SSDs or 2 10" Qs. Will the SSDs handle 600w rms no problem. Especially if I upgraded the SSD 3 10" Qs are a No cause of my budget I noticed that the Q is desgined to work in smaller enclosures than the SSD?

What will be a good sub set up for my new pioneer DEH80PRS

here we are again with more doubts in my mind about the amp I have in my single cab truck with the subs I want. Ive gottin it down to where Im torn between the Fi X 10's series and the Fi SSD 10's series. The X series is signifacntly cheaper but only has the BP power option on it, whereas the SSD has alot more capable. my budget is at $400 and I am getting a custom ported box designed accordingly that fit 2 10's. (yes I am possitive I can get enough proper cubic volume to match either of these subs behind my seat.) If I chose the SSD's, getting all of the available options to maximize its ability, it is out of my $400 range. so thats my predicament, get the BP power…

I'm looking for some really hard core 10" subs for daily ground pounding in my '91 Vette. Three 10" subs in a TOTAL space of 3 cu. ft. or less would fit quite nicely in the space I intend to use. I'm looking for decent sound quality, but I mostly just want subs that will sound the loudest when pushed to reasonable limits. What I mean by reasonable limits, is the maximum output that can be sustained continuously without causing any damage (at least to the sub anyway). I really don't care if it takes 10 watts or 10,000 watts to get that max output, I just wanna know which ones will have the most output in this situation. Thanks for any advice.

Just installed couple of D2's in some odd looking enclosure (psuedo-seat like) in the back of a Dakota quad cab. No rear seats. I'll get some pics up and see if I can't get it metered this week. Quite impressive, to say the least. Oh, ran off a single JBL BP1200.1. The poor bastard is going to be deaf within a month. 33hz will wind you if you're not expecting it. Very very cool. Too bad Mojo had to be a biatch and move back to Fort McCrap so he can't hear them

Hey SSA, I am in need of some help selecting which subwoofers to go with that would be fit my application. I'm going to try to give as much info as possible about goals, requirments ect.. I have done lots of research on the drivers that I'm considering and while there all quality drivers, I do not have personal experance with any of them so it's somewhat hard to make a choice. Vehicile: 2002 Acura RSX. The car is a hatchback for those who do not know. My plan in to build custom fiberglass enclosers for two 10 inch subwoofers on each side of the hatch. They will be about 1cubic foot and I also plan to port them using aero ports being that a slot port would be tuff to w…

I'm looking to upgrade my current set up , which is 2-RF T110D4's sealed box under back seat. Want SQ and output. Going in a 99 silverado 3 door. I really don't want to get JL's , I'm trying to get something in my area that no one else has, but also sounds good and maybe out do the (JL's and Kicker, memphis) stuff. I e-mailed FI, but no response, don't want to deal with company who doesn't respond back to me. I will be buying rockford amps as soon as I know what subs I will be getting. Will be in ported box.

Yea, Ive already checked the SI website and saw the address to send my money to, but I was wondering if there was a way to pay for one of these with PayPal, or if sending my check off was the only way. Do I need to write Nick an email before I send the check so that he is expecting it, or should I just go ahead and send it with my contact information (email, phone, address....anything else needed besides naming the item I am buying?)? If I can pay with PayPal, what is the PayPal address that I should send the money to? Are there additional charges for using PayPal? I sent an email to Nick asking pretty much these same questions yesterday, but never got a response. No doub…

i need some tweeters for my explorer. as u know, not going for SQ, but i aint spending more than 20 a tweet either. what are some good tweets? anyone know what Tommy Mckinney runs in his 2 front doors (has 8 in each door) ?

If I was to get a s550.2 and two sets of pioneer components how could I wire them? If I was to wire them in parallel I would get a 1ohm load.

so im looking at getting new mids and highs to compliment my MOJOs im putting in. im looking for very loud to keep up with the substage but also still great sq. im most likely going to be running either option on a Kicker 11ZX650.4(http://www.crutchfield.com/p_2061ZX6504/Kicker-11ZX650-4.html?tp=35782) 120x4 @ 4ohm. looking at either IA 6.5 and 6x9 coaxials or Alpine type R 6.5 and 6x9 coaxials. dont have any experience with either set and wanna see if someone can lead me in the right direction for my goals.

I have had my 15D2 for a couple weeks now. I have a Tantrum 1200.1 I am going to be pushing it with once I get it running to its full potential (need alt and batt). Currently I am running this beast with a PPI PC2150 (600 watts). I had very high expectations of this sub after all the readings. I have had it in two boxes one a 4.5 cuft ported to 30hz, and currently 2 cuft sealed. I went to the sealed do to size. This sub is very impressive. It hits the looooows, extremely well, better than other 15s I have heard. This being my first time owning a 15 (always had 12s) I was nervous about the recovery from the low tones to the highes. Well the Mag rollsovers from the lows to …

Hey I'm just sitting looking at emails and there was message from this websitehttp://www.decware.com/newsite/DBK10II.html I'm wondering if anyone here has heard, built or seen any of these sub boxes before and what did you think of them.

I just purchased an Fi BL 10in dual 2ohm sub from Fi. My amp is an Hifonics Brutus 1208 with 4 guage wiring. i hooked the sub up yesterday at a 1ohm load, turned the amp around a quarter of the way up and listened for a little while. It started having a cracking sound like the voice coil was cracking but it dosen't do it at low volumes just around half way up which isn't loud at all also my deck is stock at the moment. Please give me advice on what the problem might be dealer fault or mine.

im working on a box for two mj18s and have a few questions what size of port do i need for a box 4.5cf tune to 30hz? would there be a big dif if the box was 4 cf instead of 4.5? ( my box is 9.36cf) any building ideals or stats or thoughts would be great thanks roddy

What am I doing wrong? Sorry, I'm new to this program

I just got my hands on a 04' Kicker 15" L7. Some girl was gonna throw this away in the dumpster, so I asked if I could have it. Anyway, I hooked this up to my Zed Mini and it powers up just fine. One thing I did notice is that there is a bit of cone noise (distortion) as if the cone is breaking up. Everything on the sub looks great. The surround spider and tinsel leads all look very new. Is this a normal thing for these subs? I'm not familiar with this model. I'll probably sell it in the near future if it's in good working condition. Any suggestions about my concerns? Thanks.

i dunno if im retarded but i didnt see it on the site? whats the mounting depth for a Rl-i 10"?