Subwoofers / Speakers

I would like to say that Rusty from DC Audio is as good as gold, and hooked me up with 3 New Recones and alot of other goodies, and New Tensil Lead Cones! Thanks Again Rusty for all the support!

So Im doing my first truck, a 2nd gen s10, and was what size subs would sound good in an ext cab?

Going with a CDA-9887. What is the lowest the C1 can go safely?

I am running a 12 inch SSD sub sealed in a 1 cubic foot box. I was wondering what any of you fill your sealed boxes with? I remember reading about polyfil and stuffing and am just curious on what this does and how it effects the sound.

lately i've heard quite a few bigger name companies have used various TC sounds motors on their own sub lineups, and i'm wondering, is it possible to salvage the motors (and baskets?) to recone these subs? If so, which models should i be looking out for? I know Eclipse used some in their Ti and 8200 range, and Lightning Storm, Ground Zero etc, but i think Eclipse are going to be the easiest to track down. Also, who can recone these, and to what size? I've found that Fi can recone them in this thread, but it looks like their baskets arent a great fit for most motors. Any help appreciated guys

i need your guys help with this. i am looking at buying a new sub(s). right now the sub i have in mind are either 2 10" shocker 3's or 1 15" nightshade. either setup will be in proper box with enough power. im just need to know which would be louder. also the box will be tuned to 35hz. goin in a 01 monte carlo with proper electrical.

Well earlier this year i had a crossfire vr2000@1ohm around 3kw on a dd 9515g in a Pete K. designed t-line. I really like the output through a broad range of frequencies, and plan to do another t-line setup. However i think i could have made a better choice for woofers I have a 2006 nissan frontier (the bigger ones), have quite a bit of room if neccessary. Undecided on an amp to power it but will be at least 3kw with proper alt and batts. I have installed two sets of PG RSD6.5 comps with 100 watts per channel still running passive for now. i think the two sets of comps ran active would almost keep up with the system i have in mind. The plan is to do another t-line but w…

Hey, its been a while since I've posted here. I've been running a maw-15 ported for the last year or so, and i'm really happy with it. I just got a new car and need to downsize a little, so I was thinking about going with the 12" ixl. THere doesn't seem to be much info out there about them, except the review on here. With higher power handling, higher xmax, and just better quality overall, I'm not too worried about the output or sound quality being any less than my maw-15. Am I right? And what would be a good ported box for these? Thanks

I installed 2 MB QUART 6" speakers 6 months ago in my front doors. I rescently heard a cracking noise coming from one of the front speakers in my integra (Left Door). When I removed the door panel the speaker stopped playing but if I apply a little pressure to the cone with my finger it starts plaing once more. Is it possible that the coils are faulty or is it something else.

since 1 of my 10s is broken i decided to upgrade as i know a singel 10 wont hold me over lol if anyone wants to buy a single 10" let me know some old school RF! but wait it gets better! theres 2 of them and ill be using my hifonics BXi1606D to power the pair, hoping for a ported box but i might ahve to settle with a sealed one

First post, but i do have more on ca.com. Just wanted to see if anyone could help me out over here. Well i just installed my soloX 10" into a new box today 2 cubes at 32hz and i am having some issues. It hits the lows real good now, which is why i changed the box, but when it hits a high note (such as the high note in young jeezy: hypnotize) it seems as though the sub is sucking in instead of hitting out, almost like the pos/neg is reversed. I have checked the wires 3 times and all is fine there. Also, when it is sucking in it makes a terrible slapping sound like the cone is bottoming out. What gets me is i didnt have any trouble out of it when it was in the last box ( 2.…

Hi guys i was wondering which sub is better? A 10" SSD sub from FI or A 10" Epic sub from Audiopulse Any help would be great

i ordered a 2 ohm fi btl 18 what ohm amp should i get to power it

if i bought a 2 ohm btl would i need a 1 ohm stable amp?

I'm looking at running these 6.5's with tweet flush mounted in door --> http://www.woofersetc.com/index.cfm?fuseac...Product_ID=4596 with these 2" midranges flush mounted in the doors --> http://www.woofersetc.com/index.cfm?fuseac...Product_ID=5352 these 1" tweets in the dash --> http://www.woofersetc.com/index.cfm?fuseac...Product_ID=3089 and these 6x9 comps for rear fill --> http://www.woofersetc.com/index.cfm?fuseac...Product_ID=3078 This will all be run with 2 100.4's I've never run CDT before but I've heard good things about em and they're relatively inexpensive. Does this seem like overkill or could it lead to some pretty decent mids and highs?

http://stereointegrity.com/order.php 4-6 weeks for it to be shipped to you due to customs and everything, but should be getting them late August to early September.

ok i have a 2008 hyundai tiburon it has a hatchback like an eclipse I am planning on putting 1 12" RE XXX in it for streat beat but it is the 2006 model can any one help me with a choice of a amp to push it and a box for it thanks

I have been looking at the Loaded SSA Icon, the Fi Bl, SI Mag, and a couple other subs but cannot decide on a size. I want to keep most of my cargo are in my Durango, but want to ensure that my sub will get plenty loud. Will a single 12 with 1,200-1,600 watts be up to the task of getting loud or should I sacrifice a little more room and go with a 15? Also, I would like to be able to run sealed if possible but ported will be fine, retain some SQ, while feeling it in my chest, if possible. Any help would be great.

has anybody owned these subs? I just bought a 15" and put in a prefab ported box, gets loud but not low enough.. Is 35hz a good tune?

alright dilemma time and I need some help. right now Im looking at running two fi 18 bls off a audioque aq3500d in about 12 cubes so my question is is that too much power for them fully loaded any other sub suggestions would be greatly appreciated p.s Im 16 and money is tight so keep that in mind

8 DC Audio LV412s and 12,000 watts of fun times 3 victims

well i have a eclipse 8808 sub ( three actually) that had some kind of short were the voice coil leads are soldered to the terminal leads. this has been awhile now so i decided to cut it apart and when i got to a fresh part of the vc leads i was able to see the coil was still good so i cut off the coil as close to the cone as i could mainly to save for dimensions. well i decided to order a rockford fosgate he recone to give it a whirl. the mounting locations for the surround and spider are perfect, but the coil is way to short, and a little to large at its outside diameter. so i am attempting to graph the eclipse coil onto thr rockford fosgate former. i can't glue anythin…

Ok I have a basket out of a 12 and a motor out of a 10 I wont to use together to make it a way better 12 then get it reconed. I was able to unbolt the motor for the 12 but I still can

okay now im stuck between the two....a fully loaded 12" btl or a 12" nightshade. which would you guys choose, im sure they are both great woofers.

So i recently borrowed some l5's from a friend, but they only have 1 set of voice coils. The magnet has a sticker that says kicker l5 dual 4ohm front says kicker and is square. There is holes on the other side of the basket for more terminals*the gold colored screw things that you put the wire in* looking on the sub there is no spiders or anything for a 2nd coil, any ideas?? thought all of them were dual 4