Subwoofers / Speakers

need some help as the website is a little scarce on details I have 1200watts (600x2 actually), and im thinking of two si d2's sealed in 1 cu ft each good idea or no? #2 for those that have one can yo do me a favor a)whats the mounting depth b)overall diameter c)OVERALL depth (from magnet to surround trying to see if I can fit two of these or not thx

on the right amount of power in a good ported box tuned to around 35hz to 30hz, which sub will produce more spl...yes i know they are both more LOUD SOUND QUALITY oriented, but narrow it down to which one will be louder! jl w7 13 or Elemental designs 13 Av.2 i know the price of the ed is almost half of the W7 but sometimes that falls back on you get what you pay for!

Couldnt help but to ask. Box ready, amp mounted to box, 4 gauge flowing everywhere, trunk is fully Dynamated (Xtreme), CDs are burned and car is clean. I going with another 12" and maybe the 307 component set. I am not sure if I can fit that stuff on my door panels.

I was recently asked to do a recone on an mt 12. No problem, got the old softparts out and when I put the new softparts, the surround doesn't touch the landing on the basket. The spider is seated nicely, yet the surround needs to go down almost 1/2". The new softparts on the motor : Old softparts vs new The recone was bought from the local RE dealer and he also is confused by the spider / surround spacing. I don't think pressing the surround down is a good idea because it will limit up-travel. What are my options now ? Except for getting another recone....

Ok so I want to buy a sub but I dont know what to get. So I was hoping you guys could steer me in the right direction. Every time that I bought a sub I went to the store and listened to it and if I liked it I bought it. Now, I am most likely going to buy it online. So my question here is what am I looking at/for when I shop onlie for a sub? Here is kind of what I am looking for: Either a 12" or 15" (ill take suggestions for both) 1500 wrms in a sealed box. Please dont just say "Go with these cuz they are effin awesome!". Tell me why they are effin awesome. I need to have an educated decision because my truck is literary being built around the sub. Thanks in advance! P.S.…

Want to run 2 sealed. Requirements: 4 ohm final. Take 2000w daily. No ridiculously large box. Reasonably priced.

I have 2 MTX subs and one of them is about to go out the door and blow. I have a RF 501 BD amp 500RMS@ 2ohms and a 3.4cubic foot ported enclosure for the subs. So i need 2 subs that are SVC4 or DVC2. I'm trying to keep this rather cheap but just tell me what subs would work well off about 250 rms each. Of course i prefer spl over sq but dont want the subs to sound ugly. My friend has cvrs and i want mine to sound better than those if possible, but still get loud. Suggestions: ???

I just got my SI mag D2 15" from wedge, and boy it looks so hot. i cant wait to install it, (just gotta sell my old stuff to get a new HU) it is a badass looking sub (much better looking than my SX) love the basket, i dont think pictures do it justice. how much dose this thing weight? i would like to thank everyone that listend to me ask all sorts of questions about it (ibander lol)

which sub can get loud with maintaining good sq and which is just overall better. ill be gettin 2 12's they'd be goin in a 4 cube box tunned to 32hz. either would be runnin on a aq2200d amp. so any input?

Im getting 2 Pioneer Premier TS-W3001 subs. Trying to figure out if I need to get the Dual 2 or Dual 4 version if I use a Kenwood Excelon KAC-X1R amp and want to wire it for the full 1200 watts to each sub and in series or parallel? Also same question for a Cadence ZRS-6500D to get the 1200 watts to each sub?

I had a account here a while ago, but I guess it got deleted, wierd . But getting to the point, Ive had a 12" Mag still in its original packaging sitting under my bed for a few months now and its about time I got in a box. There were a few options I was looking at, I) 3.5 ft^3 at 32 hz II) 1.3 ft^3 sealed Looking for lowend output, hard slamming bass Probably gonna give it 600-800 watts, due to stock electrical system. Thanks for your input.

I just bought two old 12" JL Audio W0's From the Pawn Shop today. They can in a small sealed enclosure. Will w0's work louder and better in a ported or sealed enclosure?

i have a 3500d and was wondering what would be better in all aspects and sheer output? would the BTL's fully loaded or nightshades be better in my situation. either choice will have box build big enough due to it going in an suv and tuned between 30-35hz might change what i tune it too, but it is for a daily set up. and if anyone wannts to throw in opinions about the xcon or ia death penalty feel free. electrical is 250h/o alt, with 3 batteries including the one under the hood. subs will be facing up with port back. port will be running along the bottom instead of right or left side.

Hi, Just get my new car in 2 Werks and idk which woofer to choose. I want 1 12 inch woofer with good bass on the body ( sry dont know how to say) It's going in a 08 bmw 330xd.. I was quite happy with my old 15" re sx but want some better ;-) Though of fi or sundown... What ya think?

I need help troubleshooting a new speaker install/upgrade. I just installed Boston Acoustics in front and rear. SR60 6.5 components in front and SR95 6x9 in the rear deck of a 96 Impala SS. The problem is now the rear sounds much flatter and the front is way too bright up high. These were upgrades to 12 year old Boston 6.5s and Pioneer 6x9s. Old speakers sounded fine but I wanted better sound and a bit louder. Old speakers were 50w rms and new are 80-85 rms. Amp is 100x4 rms and I also have on a seperate 450w mono amp a 300W Pioneer 10' shallow sub in a sealed box inside the cabin, not the trunk. Location of the 6.5 components up front are, woofer mounted in the do…

I have a sundown sa 15.Its in a custom box at 33hz, powered by a hifonics brutus 1200. I have cheap 1200 watt amp kit from walmart right now but here very soon im upgrading to knukonceptz kca 1/0 amp kit. First question is : will i tell a difference in loudness or quality from this better wire? 2nd question is : how should tune my amp for my sub. Right now i have everything set to half way. My level is set to where im pushing around 900-1000 rms. help me out guys! I will greatly appreciate any tips

Is a 139.8 on music loud for this?

My sub choices consist of the following: FI SSD, Ascendant Arsenal, Treo TE or SSi, Incrminator Li. all are 10" Would like to know how each of these subs rate musically wise that can still get fairly loud when needed. Would like to use a small sealed box.

how about dem subs

I have a bit of a delima. I am going to have two 8" subs and planned to put them in my truck, but I now realize I have quite a bit less space than first anticipated. My question is, would it be better to place one sub in more space, or to put both of them into quite a bit less space? The subs are soundsplinter rl-i8's, and I have about .72ft^3 total to work with. That would be about .28ft^3 per driver after displacement. Or I could put just one in about .64ft^3 after displacement. So which would produce more output, one with more space or two with less. I will be pushing it with a memphis amp which gives 1100 rms at 1 ohm.

I just got two Audioque HD 12's and I need to know if they will perform well using the SSA XCON dual 12 box design. They will be powered by a 3000d in a 90 Mustang. I sent the box designs to a builder but he is not familier with Audioque. What do you guys think? Need feedback ASAP!!

I they say 2 ohm why do they measure 1,5 ohms

Hey all. So I was wondering if an AQ2200 would properly power 6 American Bass XD 12's. I have 2 XD's right now and I'm wanting more. Let me know what you guys think please. Thanks and Merry Christmas! HawkEye

Hi,I'm having a really hard time choosing a new sub. I think I've narrowed it down to these two, the new orion hcca 15.2, or the fully loaded 15" Fi BTL. It will be a daily setup in a 95' nissan hardbody. I will be running it on an orion 2500D in a 4 cubic foot ported enclosure. I would also occasionaly like to see some fairly good mic numbers. Please be honest as to which is the better sub for my application, thanks.