Subwoofers / Speakers

well ive thought and debated and i think im leaning on re doing my subs and amps i have on re sx ten in the back with md1d right now think im gonna go two twelves or one 15 cant decide yet but its in a s10 2002 ext. wanna try and keep it under the window line but ill deal with box after that im looking to get about 1000 watts out of each sub or more so a total of 2000 watts or more if i can, ill match amp after i get subs i think its gonna be a d2 sub probably. this isnt a spl vehicle but i do like my bass to hit hard im gonna have the big three done by the time i get this new system im just looking for some inputs for now. ive thought about going re again i love my sx bu…

The group buy for Caraudio.com/Soundillusions.net will begin on Monday Jan 31st and run through Friday Feb 18th. The group buy consists of (prices include shipping in the continental US only): RE Component Set $129 RE8 $37 RE10 $42 RE12 $47 XXX6.5 $179 (pair) Plus if you buy $100 of the above "group buy" products you will be eligible for 15% of any of our other RE Audio products purchased at the same time (not including the initial group buy items). Example: Buy a set of the RE Comps for $129 (meeting the $100 minimum) and get an extra 15% off of a XXX12. Orders will be taken direct via phone only at (702)896-4823 starting on Monday Jan 31st and ending on Friday Feb 18th.…

okay well this blows.......i put my amp and all in the truck hooked everything up PROPERLY and im playing it at a respectable level (50 out of 80) and all i hear is a loud pop, and a cloud of smoke rise from no where......i couldnt tell u if it was from my subs or not but it looked to be coming out of the port. i didnt smell anything bad BUT im looin at my subs and it seems as if two of the subs have a lot looser of a suspension than the other two......its really pissing me off cuz ALL I HAVE HAD IS PROBLEMS WITH THESE SUBS! let me know and yet its my bday.....go figure this stuff happens today

I was recently asked to do a recone on an mt 12. No problem, got the old softparts out and when I put the new softparts, the surround doesn't touch the landing on the basket. The spider is seated nicely, yet the surround needs to go down almost 1/2". The new softparts on the motor : Old softparts vs new The recone was bought from the local RE dealer and he also is confused by the spider / surround spacing. I don't think pressing the surround down is a good idea because it will limit up-travel. What are my options now ? Except for getting another recone....

Hey wuts up? i been lookin at these two subs as a upgrade over my 15 inch comp vrs plan on runnin a saz 1500d to the sub outta an escalade not worried bout box size since i plan on it bein fairly big anyone have any opinions on what they would prefer and why. thanx sry if i sound like a noob askin the typical "what is better" question but i have no experience with either

i have a friend that is trying to build a 4th order box for an old RE MT 15... soo are there any true specs for it? or is there another sub in the family that it can be closely modeled to? thanks.

RE MT15 + Kicker ZX2500.1 @1.4ohms + 4.5cubes @33hz w/ 90 in^2 of port = wangage? Keep in mind I have 125 sq. feet of SecondSkin Damplifier applied on my truck, including near 3 layers on the roof, the back wall, and the side walls... and two on the doors. Too bad it didn't get the part of my bed flexing like it did the back window... it's crazy worse in person ... It's pretty sick in the truck, I'm pretty confident it's the loudest daily 1sub setup in the Tri-State... but who cares... Without further ado... http://realmofexcursion.com/videos/REAudio/mt15.8.wmv nG

would it be a good deal to buy a re mx 18 that has one bad coil for 100 cash. ive got a quote on a recone of 182 but shipping will be another 60 there and back. what do you all think

I'm looking to upgrade my current set up , which is 2-RF T110D4's sealed box under back seat. Want SQ and output. Going in a 99 silverado 3 door. I really don't want to get JL's , I'm trying to get something in my area that no one else has, but also sounds good and maybe out do the (JL's and Kicker, memphis) stuff. I e-mailed FI, but no response, don't want to deal with company who doesn't respond back to me. I will be buying rockford amps as soon as I know what subs I will be getting. Will be in ported box.

how good r these speakers.

I have an old RE 12 that I had no Idea what the model number was and so forth so I emailed some pictures to the Fi-Recone email. They informed me that it is the SE series and RMS's around 600 watts. What Recone kit would be best for this subwoofer and would it be cheaper for me to purchase the recone and do it myself or just send it in to Fi? Your help is much appreciated, I know there is a probably a lack of information but that is about as much as I know about the subwoofer.

OK,Ive got an SE 15 with a bad coil.I used to run a shop with my brother and we were authorized US/RE dealers.A kid brought this sub back in and we replaced it,well this was about 2 years ago and we never sent it back in(the shop cosed down).My question is can any of you guys repair this or can I get something to repair it myself.If so please let m know,and how much it would cost.Maybe if I get it fixed I could sell it and put that towards some Icon 10d4's.

Howdy.. I'm gonna be gettng a new system in a few months, after I save up the money, (had a single alpine type R, sold it to get some cold cathodes, currently got 8 under my seat and dash), and I want to go with RE. My wallets liking the SE, But part of me wants to get the SX's. My question is, Will there be a noticable differance between the SE's and the SX's? I will be running 2 12's in a ported box. It'll be in an Explorer, And If you guys got any ideas of another sub which will be loud and sound decent, i'll be open to whatever you guys suggest. Budget will be about 150-250 a sub, Depends on how nice of a job I have and how much I have saved up for it. It will be …

I'm looking for a 12" sq sub in the 500-600w range. I haven't been keeping up, but I seem to remember reading that RE products have gone down in quality. I know the IDQ is an all time favorite. Anything else fit the bill?

I could get my hands on a pair, 3, or 4 RE SE's rated 600, but we all know RE can take the extra power so they had 1200 on them. Hes letting them go cheap, should I cash in on them, or get what I was planning on doing 15" Fi BL.

i have just killed an SE after a dodgy binding post causing the amp to send 850w to a single coil! and im considering a 12 SI magnum. bearing in mind, the SE12 was receiving 1250w rms, and did 135.9(termlab) in an SUV in a 1.8cu ft box tuned to 30hz. what can i expect from an magnum running off 850w rms?? i have been told they are efficient? but are they efficient enough to out do the SE the SI will go in a similar if not the same box. what can i expect? SPL and SQ wise? what sort of box would suit it best? thanks in advance

I just bought 2 of them for my 97 blazer. I need a port diameter so i can build a ported box. Please let me know as i cant find it anywhere, Thank you -Mike

I have an RE SR 15" that I acquired in a trade on CA.com and I was wondering if I could put ~400-~500WRMS safely to it, with out burning up the coils? It's a 2.65Ft^3 box tuned to 35Hz, and I was thinking it would get a little louder off of 300WRMS than what it did.

I'm looking at the RE SR subs for 600 watts and I may run a pair of the 10s. However I saw that the 12s only require 1.5 subs per sub tuned to 35 hz. Does that sound right? If it is correct what type of sound would that produce? Would it have good SQ and get loud?

Will a 15" SRx hold up on a kicker 400.1 daily.?

Hey guys whats up im doinga build for my ROOM haha. I have a sub in my car why not at home! Ok So i bought a RE SR10-D4 10", here are the specs. I want to Make a slot vented box 1cf tuned 34 hz. Iam going to put 300 rms. Ive built boxes before But i still dont know how to design one on my own so im asking for you guys to help me with the buildcould someone design a box for me i want the sub to be top mounted with the port on the side. I just need a cut out sheet with the dimensions of the box thanks a lot guys billy Specs of the sub * Kraft Pulp Cone * Rubatek Foam Surround * Pressed Steel Basket * 4-layer Copper Voice Coil

I had a set of jl 12w3's sitting around. I wasn't using them because the surrounds where dry rotted didn't want to throw them away So..... I found a kit for them on ebay. Kit came in today... These babies are going in my Honda..

i was told i would get a much better response here instead of the us amps section... anyways i have a RE SX 12" and i jus wanted to see if anyone has metered a 12" SX so i can generally get a feel of about how loud i can get

Just thinking about putting 4 of these in my daily driver on a SA-3000d. Wondering what you guys thought of these subs since i have never had any dealings with RE before.

what are the general opinions on the RE SX or the SXX 12's ? ] what are they similar/ worse/ better than for around the same price range?