Subwoofers / Speakers

how do these two subs compare in SQ and SP?

Ive heard these are very very nice for the price, Trying to find a good Component set up for under 250$ shipped. Any suggestions or input will help a lot. Amp: Profile 440 Truck: 1986 2 door S10 Blazer Thanks

Just got these RE TRiple X Series comps last week so cheap, People that work at Mc Donalds could afford them. (No Effensive)

Factory recommendations: Acceptable: 0.4 - 0.95 cu ft net volume sealed 0.3 - 1.2 cu ft net volume vented, Fb = 22 - 36 Hz Optimal Car: 0.65 cu ft net volume sealed 0.45 cu ft net volume vented, Fb = 27 Hz I notice that the optimal vented box is smaller than the optimal sealed. I was thinking going sealed b/c of space issues but if going ported will really be smaller should I do this. Im also thinking aero ports and need some information on how to calculate what size I would need to tune to 27 hz. Does anyone own an rl-i if so what kind of box is it in?

While catching my breath from lugging a pile of boxes around, I thought I'd crack one open: Back to work now..

Been a long day... IXL-15.2.2 and SPL-12 specs are now up on the website for those who are mildly curious. Thanks for being patient. m

Hi. I havn't been on here in a while. I just gt my system all hooked up and everything sounds good. I just had one more question; What kind of speakser would fit my front door speakers for a 2001 Pontiac Grand AM GT? I would like Kicker front speakers with built in tweeters, but I am not sure as to what size would fit my car. If someone could help, it would be greatly appreciated. Thanks in advance!

http://i229.photobucket.com/albums/ee246/k...19/100_2169.jpg http://i229.photobucket.com/albums/ee246/k...19/100_2168.jpg http://i229.photobucket.com/albums/ee246/k...19/100_2171.jpg http://i229.photobucket.com/albums/ee246/k...19/100_2170.jpg http://i229.photobucket.com/albums/ee246/k...19/100_2172.jpg got it for free seen one of these in a while?

all i wanna know is when? im soon to be selling my clarions and i need something around the 200-250 dollar per driver range.

I'm wanting to go active with front stage. I've been shopping around Seas, Peerless, Aura, etc, and was wondering if anyonce has used the mli-65 midbasses-midrange in a IB door install. If so, looking for opinions on their performance compared to the other offerings mentioned above. Note: tweeters have been decided on either.

I've been searching all over here and CA.com for vented box specs for my Mag. I've tried using the box calculator at subwoofertools.com and I keep coming up with ~73in^3 of port area. From reading around it seems like I should be closer to the low-mid 60s. Am I correct or should I just stick with the plans swt.com is giving me?

I found an old JL 10 for sale, didn't see a number on it. Looks like it was reconed or something but ok job. Motor is near as big as the hole it would go in, its heavy. Kind of well used looking but new JL dustcap and maybe foam on it, it is all black and stamped looking frame....any idea of value? Not sure what I could do with only one. It has thick paper gasket on top edge that is torn up some, the rest is not bad.

so im trying to decide between these four diffrent types i will be getting 2 15" i just dont know which ones what ones would u pick for SPL and some SQ and give reasons http://cgi.ebay.com/Cadence-Daytona-15-RVC...1QQcmdZViewItem https://ssl.perfora.net/www.ficaraudio.com/...view.shopscript http://www.soundsolutionsaudio.com/shop/in...p;productId=194 http://www.soundsplinter.com/rlp15_subwoof...nformation.html also considering these since they are on sale http://www.woofersetc.com/index.cfm?fuseac...Product_ID=5534 also can people post some links to some good amps that can power atleast 2000 watts rms

ok so me and my dad went to an audio store and asked for some subs at a good price they showed us the 12" rockford fosgate punch p3's and he said 275 for two of them so we went to a different one and asked what would sound good in a truck he said 2 10" kicker cvr's what would you buy for subs???? and the amps for the p3's would be a fosgate 1500 watt amp and an amp for the cvr's would be a 500 watt

Topic speaks for itself. !st of is a Concept sub. Don't quite think it is supposed to stay like that.

i got my 18 XXX today. it has broken tinsel leads that were semi repaired with speaker wire. though still broken. the surround is scuffed bad all the way around but the duscap is still pretty. lol. motor is still in really good condition other than a scrape on the very bottom. i tested the coils with a DMM and they both read 2.4-2.5. if i remember clearly(haven't tested my 15xxx in a while) though not 100% sure but aren't the coils supposed to be like at 1.7-1.8? so what i was thinking was what should i do?? i still have about 2ft of tinsel lead i got from fi. i was contemplating on resoldering all the leads then just sticking it to a wall socket and take a vid, but that…

Just wondering, will the M series will still be in production once the IXL series has been filled out? Does anyone have an opinion about this? PS: Can't wait to see what the IXL 15 is like!

I want to go passive over active right now because active seems way more expensive considering that this will be my first component build. But, how do I get good mids and tweets to sound good with the crossovers? JimJ said that these crossovers won't work too well? Amp: Crunch PowerZone 4-Channel Amplifier (PZi175.4). Sub: Dayton RSS265HF-4 10" Reference HF Subwoofer 4 Ohm 350w RMS. Tweets: Morel MDT-12 1-1/8" Neodymium Tweeter 80w Mids: Dayton Classic DC130-8 6" 50w Crossover: Dayton XO2W-3K 2-Way Crossover 3,000 Hz Another question, will this ^ sound better than this: Pioneer Components, TS-C160R

Ive got myself a 1977 Buick Regal...thas one of those metal cars...no plastic...and no type of dampening so yes sound dampening is on my to get list. Im not an all out SPL guy, but not any all out SQ guy... Im more of a "LSQ" guys that many people are...but wont admit it. Due to an awkward trunk...I AM A go with either 1 15 or 2 10s. I want it to sound clean and hit the lows. Boxes im thinking bout ..... two 10s...3 cu ft. tuned to 32hz, 1 15 3-4 cu ft. tuned to 32 hz I dont wanna spend more than 230 for a single woofer or 400 for a pair WOofers Fi SSD 15 AA Aresnal 15 Re SE 10, 15(they are pretty cheap on ebay) Alpine Type-R 10, 15( hear they arent very good on the sq, i…

i was wondering what subs would be the best for loudness and i am looking at the these three subs: 2 12" Fi Bl, 2 12"kicker L7, or 2 12" jl audio w3v2 which one would sound the best and i am willing to build my own box and im going to buy a sub that will power whatever sub i buy

I know that the size of my speakers is 6.5", but my question is this. I have a 1995 Honda Accord and am worried about mounting depth. I've heard that the window comes down pretty close to the back of the stock speakers and on crutchfield, I'm not sure if the speaker takes into account the mounting depth. anyone had any experience with the honda accord? or if crutchfield takes into account the mounting depth?

I already have one rl-i8 soundsplinter but i worried that I won't get enough out of it (not in car yet) so ive been lookin at porting it I can't go any bigger then 1 cube after port. it will get 400watts. I would just get one more and do two sealed but I can't afford another one. I have never built a ported box before, what size chamber and port do I use? can I just build one like this guy? this would fit in where I want it. at 400watts would this get plenty loud? want to hit at least 135db. http://www.caraudio.com/forum/showthread.php?t=246811 thanks all before hand

I have A Rockford Fosgate T4000 and 2 - 300 amp iraggi alts, 2 - Kinetic 2400's What is better 4 Kicker L7 15's or 2 Fi BTL's Fully loaded? Porting the bed of a 02" Chevrolet Silverado Ext. cab Fleetside What Should I Do? And What Should I tune It to?

I've got a '94 single cab sonoma that all this is going in. This is my second stereo, last one got jacked. Amp: Crunch PowerZone 4-Channel Amplifier (PZi175.4). Sub: Dayton RSS265HF-4 10" Reference HF Subwoofer 4 Ohm 350w RMS. Tweets: Morel MDT-12 1-1/8" Neodymium Tweeter 80w Mids: Dayton Classic DC130-8 6" 50w Crossover: Dayton XO2W-3K 2-Way Crossover 3,000 Hz Box will be roughly 2 cubes ATLEAST. Still working on the design in a ported box. Opinions?

well the brahma started to sound funny so i pulled it...i figured the triple joint that i fixed came undone...but i guess i did a better job than i thought because the triple joint is fine...the spider came unglued from the frame! i plan on fixing it until i can afford a re-cone to a different size, but does anyone have any good tricks to align the coil so i can glue the spider back on? i figured i'll probably have to remove the dustcap and use shims to align the coil but i figured i'd ask.... anyone know where to get replacement dustcaps?