Subwoofers / Speakers

anyone know or have tested the maw10s to know how high they will run with a relatively flat output and no distortion? i need to get roughly 400-600hz outta em, reason for this is i have come into owning a pro-sound amp, and am looking to create some party speakers.

also what does this compair to in the Fi line up? Thanks

Aight , I have done a few IB installs here and there. Dave and I were discussing IB in his camry and a question came to mind . Both sides of the sub play exactly the same thing , only one side is 180 degrees out of phase with the other. So knowing that , does it matter which side of the sub is mounted in the trunk ? Meaning 99.9% of the time an IB install in a car is done , the cone is faced forward towards the cabin of the vehicle, and motor in the trunk . Does it have to be this way or can it be flipped the other direction ?

Solved the problem by selling the MX & buying a mag again I bought another mag, turns out it was my exact same mag i had owned before mx. It got damaged(cosmetic) in shipping. packaging could have been better. but i'll live. No more mechanical noise at least woot. here is the difference

wondering how and if the BM would be a good choice to put in a HT setup? I am going to build a sub for my HT soon and am looking for a good woofer. I LOVE my mag, absolutely LOVE IT! and am anxious to get one of the new ones most likely. But lets hear it, would the BM do the job right for HT?

Heard a level 4 15 sub today and it was a monster, low end was amazing, clear, and sounded nice, to top it off the sub wasnt even broken in yet just simply dammmmmm... Big props to sky from Hawaii Aloha

OK I made a new box (sealed) but I dont know how many cu.ft net it is? the box it the inside is 12"D 27.1/2"H 23"W with a driver displacement of 0.25 how many net cu.ft is it ????? help!?!?!

http://www.youtube.com/watch?v=NVl4jkup5ks http://www.youtube.com/watch?v=Plcp2QRCFzg http://www.youtube.com/watch?v=aYdpDW8lWEc http://www.youtube.com/watch?v=j3rk6UUpiCI

So I'm going to be in that area in 2-3 weeks - picking up a boat I purchased in Cottage Grove. Figure I would camp out in St. Cloud since it is north of Minneapolis, which means easy driving from there. Would love to hitch up with a few folks in the area. Might bring down a couple of goodies.. Best, Mark

My friend is looking for some components and has about 175W @ 4 to play with and ofcourse wants to fill that void with speaks rated somewhere up there, but it seems to me there are more quality components in the sub 100W range. I noticed there are few passive component sets that are rated up over 100W RMS. Are there any high wattage components that are highly recomended? PS- Price range around 200-300

ok so the story is a guy on another forum bought a tumult, blew it and sent it in for a recone, lol never got it back and can't get any response from them. can anyone pull some strings for me to get it back?? he's sent 20 plus emails. i'll see if i can't get him to sign up.

I am wanting to know what size of a ported box would i need for the 18 IXL if i wanted it to be built to 35hz.

I have 2 Rockford Fosgate rfr3110's and Im planning on building a ported box for them both but I want to know the difference between separating the 2 subs to one sub per chamber (2 ft^3) with 1 square port each OR having both subs in the same chamber (4^ft3) with 2 same sized ports. Basically, I have the size and dimensions of the box ready to draw up, but should I have a divider between the 2 subs in the box?

Check out these scores Held my 1st official ((((Propper Droppers)))) event this weekend. Sundays event went really well. Look at my results. Taken from my forum: -------------------------------------------------------------------------------------------- :drummer: :earmuffs: I`m very happy with my SPL Testing results Couldn`t stop thinking about it on the way home - big grin on my face. :earmuffs: 1st to hit 150dB+ @ 20Hz in the U.K :earmuffs: I managed to change the speaker wire to 4x runs of 8gauge instead of the two bits of bell wire I was using. I think the tiny bit of extra effort & more wires did good... Mega Heavy Bass - Walled / Extreme Systems. 1: …

my sub smells i cant tell if it is smoking cuz it is in my trunk...i have a dual 4 type r...i think i fried a voice coil...it plays good..well it sounds good..but when i turn it up it smells horrible...i have the directed 1500d running to it at 2 ohms with the gain set at half and the bass eq off and it still does it with out a problem in the matter of minutes

I am looking at the $25 TC9 motor, for those who do not know what I am talking about they can be found at caraudiojunkyard.com. There are 4 variations of the TC9 motor, which one is this? The only thing I know about them is that they are the ones with the 1" slugs. Is that the same motor that is used on the SS RL-P's? If not does anyone know of a sub that this model TC9 motor is used on? I am trying to figure out which one I am getting. If it is the model on the RL-P's then I might have to get some for sure.

got bored waiting for a little infor enjoy. ask all the questions you want

im looking at the FI BL15 and they have it so you can customize your sub but i have no idea what some of the option are that i can choose. P champer? Cooling? Flatwind? Extreme Lead? Universal? anyone have any ideas on what they are talking about when asking if i want these and what benefits do that have to getting them. im just looking to get as much SPL out of this sub as i can

I was wondering if it would be possible to get one of the new BM baskets by itself? also would it acccept a quad coil cone (doesnt look like it so thought id ask) and if the answer to both of those are yes then can i get the specs on it (to see if it will even fit my application

I've been trying to figure out what to do with my 18 XXX. I finally decided on a 4-5 cube sealed box, depending on how large an area I can fit in my trunk, but the 4-5 cubes are the definite range. I was going to go just sealed, but love low end & was wondering if I could do passive radiators w/ the xxx. Corey don't kill me for makin this post, just figured it'd help! By the way, if any of you end up not liking me one bit, blame Corey A., he's the one who told me to come here. Anyway, thanks for any help or any insight in this idea.

Ok i dont have a lot of room in my doors and can only put a 5.5 in it maybe 6 with some mod. I was thinking of going active off a sundown sax 100.4 with Seas CA15RLY and not sure what tweet so what would go good with that. Or would it just be better to get a component set.

I got this off of caraudio.com and I couldn't find anything close to all this news on the "official" SI site. I understand this may not even be the chosen driver, but this IS the driver I want, specifically the Shollower mounting depth (by a full inch!) and secondly but not as important - smaller, more specific enclosure requirements. If this ends up being the new Mag, it means I'll be getting this to stick in my Rav4, which my current Mag was supposed to go into be can't because of mounting depth issues. This also means I gotta say sorry to Fi and Soundsplinter because I think I'll stick with the Mag. Saying that though, This needs to be quoted: BTW, here's the car…

are these subs any good, sum of my buddies have these and there sayin they sound loud low and clear. just want sum opinions on these, and wat would compare them 2? i was also looking at the A2400db amp for them, but idk if that amp puts out rated power..... any other amp suggestions... thanks

Hi. I am new here, and somewhat new to the whole car audio thing. I just got a 2001 Pontiac Gand AM GT, and was wondering what kind of speakers (not subwoofers) would fit and sound nice in it. There is just one blown speaker (rear right), and I need it fixed soon so I can start installing my system. Any suggestions? Any help would be appreciated. Thanks in advance!

Hey all, I just put two DD 1508's ported in the back of my extended cab f150, and to be honest they sound like poo. They do get loud, but notes just run together, no definition. That being said I'm thinking about offloading them and trying two maw15's sealed. I'm curious if these are more of a SQ driver, for the price they are hard to say no to.