Subwoofers / Speakers

What effect does it have when wiring the tweeters out of phase? I've heard that it can be another tuning aid, but not sure what it does, or is supposed to do to the soundstage or sound of the tweeter. Will it make them more laid back? Make them distort easier or affect power handling in any way? I ask because I want to make sure if I try it that I don't do more harm then good, so any caveats are appreciated. Searched online and didn't find any useful info, but figured some of the more experienced here might share.

best 2 way comps in 6.5 " $500 to $1000 the set of front stage needs to be able to work off a 2 channel amp with 200 to 250 watts per channel what are you suggestions

New BM's are in the making so we need to clear out some of the current 12's we have left. For a limited time only (the end date will be announced soon) we are clearing the BM 12's out for $170 shipped each. We are taking orders through us and also through Sundown Audio. Keep in mind the drivers are $280 regularly. I'll post up a buy-it-now link on our web page tonight once I get back to the office.

I need help. Im looking for 60% SQ 40% SPL. I want it to get loud but still sound good. Which is better for this. I was looking at a cadence txa-1000d and a sundown sae-1000d amp. From what i have read most people pick sundown hands down. Would ~650 watts push a soundsplinter hard because it says 500-1000k rms on the website. I'm open to suggestions on amps. I'm just trying to figure out which is a better sq sub at the moment. And this would probably go in a ported box ~1.5 cubes @ low 30's.

If i wanted to purchase multiple subwoofers even if i didnt want the same sizes, is there a discount?

im working on a box for two mj18s and have a few questions what size of port do i need for a box 4.5cf tune to 30hz? would there be a big dif if the box was 4 cf instead of 4.5? ( my box is 9.36cf) any building ideals or stats or thoughts would be great thanks roddy

I'm ready to start this bad boy. This will be a totaL SQ install (I hope). I'm starting from scratch. The Altima is completly stock. Here are the plans... Front Stage 2-way or 3-way (if it will work) up front. Components that I'm considering are as follows: Tweets Peerless 810921 (big flange , but I think I can work with it). Vifa XT 255C5G (already have a pair) Seas 27TAFNCC (heard great things about it, but not a real big fan of aluminium tweets) Woofer Seas CA22RNX 8" Peerless SLS 830667 8" I can fit and 8" in the doors with a bit of modification. Power? Not sure yet. I'm a big fan of Zed and would love a Draconia (already have on e in the truck). I'm considering the …

I thinkin about buyin a mag off of someone but dont know how to tell which one it is? Does it even matter which 1 it is? Does 1 have better power handling then the other or would you say they pretty much have the same? heres a pic http://img49.imageshack.us/img49/194/picture001vt3.jpg

I am wondering if this sub can come in either of these. I need to wire down to a 2 ohm load. Thanks for the help.

or is it just me

I have 2 MTX subs and one of them is about to go out the door and blow. I have a RF 501 BD amp 500RMS@ 2ohms and a 3.4cubic foot ported enclosure for the subs. So i need 2 subs that are SVC4 or DVC2. I'm trying to keep this rather cheap but just tell me what subs would work well off about 250 rms each. Of course i prefer spl over sq but dont want the subs to sound ugly. My friend has cvrs and i want mine to sound better than those if possible, but still get loud. Suggestions: ???

Hi all, i heard about these drivers over at canadiancaraudio, well i have been reading and looking around the store and here question is is there a usable frequency hz number for these what are they being crossed over at, any impressions on their sound quality boom boom out go the lights !!!

i have one lying around and was going for a SQ setup. i have someone doing some work on my ported box and i was gonna make a temp sealed box. anyone have the old specs and/or box recommendations for the 05 XXX 18??? thanks

so it says 4.5 cu ft recommended for ported box for an mj 18. how would it affect sound and output if i was to do say...6.5 to 7 cu ft. each? tuned to 30hz? would i get more bottom end? more output? what...

Hey there, I posted a topic earlier about my 68 Camaro: http://www.soundsolutionsaudio.com/forum/i...showtopic=10357 I decided to build a new sub box, ported, to try and up my bass. Next I want to replace my current speakers, they aren't the best. I am trying to keep my budget around $600-700. I went to the local Car Phonics and they suggested this setup, and quoted me $692 (including install). However, I found the same speakers on ebay for under $300 (for both) and would be perfectly comfortable installing them myself. http://mobile.jlaudio.com/products_components.php?comp_id=61 http://mobile.jlaudio.com/products_compone...php?comp_id=129 Is this a good setup for my car?…

it will be going in my 350z hatch for daily in 3/4" mdf 1.5" baffle 2 each 4 " aeroports 30 hertz no carpet off about 4500 watts at 1 ohm

is this sub the same as the concept PT and can some tell me more about the HC I was told there the same sub???

Hi, I'm new to this forum, and i need some opinion, what you guys think of this setup? 4x RE Audio SE 15's in 6.7~7.0cuft Sealed Enclosure power by 2x Sundown SAZ-1500D giving them like 750wrms each. 8x RE Audio RE 6.5 Components power by 2x Sundown SAX100.2 giving them like 75-100 wrms or 1x Sundown SAX100.4 giving them like 80 wrms, I read that the RE 6.5 are rated 50wrms can they take more than that? will the 8x RE Audio RE 6.5 be enough for the 4x SE 15's? What Alternator size will be good for this setup? The ones that have experience with both MTX and RE Audio, will the 4x RE SE15's Sealed be louder than 4x MTX 7500 15's also sealed? sorry for so many questions but …

What would the recommended wattage be for a single 18 run in an IB set up?

This is why you don't build a wall unless you know what's involved in a proper build... http://seattletimes.nwsource.com/html/loca...aralyze01e.html I know there's been a lot more cases than just this, but I got this link from another board I'm on today...with some of the posts I've seen here, it couldn't hurt...

I'm looking into a 10 or 12" sub and I'm tryin to find a choice from the Fi/AA lineup. I want to run it sealed. I'm looking for great SQ with a good amount of output. I have UP TO 1500 watts available, but i can go as low as 300 watts. The Arsenal seems to be the one to look at from AA's lineup without breaking the bank. The Havoc seems to be a bit too much SPL oriented i think? From Fi's lineup, I'm strictly looking at the Q. So how does Arsenal compare with the Q. Is SQ the same with a little less output, or does the Q have better SQ? Thanks for the help.

Ok. First of all, this thread is for a free Mag 15 shipped to your door. How you can get the Mag is this: Design us a web page. (the whole thing, not just one page) We are looking to re-vamp our web page and we need someone to design it for us. This is an open contest, anyone can win! Just email me at [email protected] for the design details (what we are looking for) and we'll fire an email back so you can get started on the design. We'll let this contest run for a month, so by the begining of next month we will have a new web page and someone will have a free Mag 15. Thanks! Nick

i know i posted this in another thread but i thought i should move it to the proper location. set up: Alpine 9835 HU (3 way: sub, mid, high xovers) orion xtr 800.4 for mids and highs eD 6000 version 1 6.5's and cadence 1" tweets and rainbow 5.25's with 3/4" tweets sub stage: RE 36.1 for a 05 XXX 18 tuned to 31 hz i have a fullsize ext cab truck. i have a descent set of rainbow components that i wanted to keep in the rear, but if im goin to go active for front stage using my 4 ch amp i wont be able to have the rainbows in the back anymore. my HU only has 3 pre outs, sub, mid and high. i dont supose there is anyway to keep the rear speakers unless i run them off the HU sp…

The other day when Mark and I were talking about his new model subs, he suggested he send me one of his new prototype drivers, the Mach 5 SPL 12. I got this sub in this weekend and had a chance to look over it and install it, and throw some real power at it (above 2.5kw, per his request). This will be Mach 5 audio's first real SPL dedicated subwoofer, and from what ive observed this weekend, I only wish they had them in 18's First off, here are the pictures of the driver. The first thing I noticed about this driver is the heafty weight of the assembly, it comes in at 54 lbs :eek: The basket is a standard 12 spoke style, however its been machined and milled …

Well, Im new here so why not annoy all the old timers with the question of what should I buy. The basics: 2006 Hyundai sonata - large trunk, around 16-17 cubes, partially deadened. I generally prefer sealed, although ported could work. I dont want to use more than 2 cubes, and preferably less. I am looking at quite a few different amps, but assume 600-1000 watts at a 2 ohm load. I would like to see 134 db. I am not dead set on any particular size, although I have considered two or three 10", or a pair of 12s, maybe a single 15. Would like to keep it under $250 usd for the sub. I have used elemental designs, alpine, kicker, and a couple other lesser brands but for various …