Subwoofers / Speakers

where do 2) 15inch SSA Icon 15D2 subs perform best? tuning and airspace wise.

hello, thanks for any help in advance. i'm looking at ordering my first mach 5 subs ( ) and just wanted some recommendations as to which ones' i should get and bopx sizes. right now i have a crappy 15" kicker cvr in a ported box tuned to 35-36hz. and i want something to keep up with it in spl but also have better sq (which shouldn't be hard since kicker sucks, but it was damn near free). i have 650wrms to play with so i'm thinking about 2 maw 12's. how would they compare sealed or ported? if sealed works (kinda hoping it does, miss the lows my box now doesn't get) what would be good size, was thinking about 2.5cuft after displacements? or ported, but i'd want it tuned lo…

It's a ten with a small crack in the basket, i'm not sure i haven't received it yet. but for the price i paid i'll use it either way lol.

I am planning on ordering 4 sundown sa-8 v2 subs for my Silverado crew cab. I am gonna build a box for them that will be 2.2 net cubes, maybe a little more, and with at least 32 square inches of port area. I am wandering if since I am going to be using a crescendo bc2000, should I get 4 dual 4 subs and wire them to .5 ohms or 4 dual 2 and wire them to 1 ohm? I have done the big 3 in 1/0, have a stinger spp1500d, and have all wiring in 1/0. I will also be buying a new alt here soon.

Well i bit the bullet and im buying used CD player. Eclipse 3400. while insalling my IS2080 i found my surounds on my RE mids where comming unglued and the coens where dry rotting. IE poor build quality though they sound great. one of the cones has actually begun to split with the extra power. So im going to have to get new mids, im planning on eventualyl going active so i'd like a good pair of 6.5's that have strong midbass, around 100w RMS or less, work well IB or sealed, and would integrate with me RE tweeters and overs for the time being.

can anyone find the t/s parameters for these. I've looked everywhere and can't find anything. Thanks!

i need help on what subs to put in my car in everyones opinion what is a better sub aa HAVOC or DC level 4xl?

I found someone selling some digital designs 508s. i was wanting to know if anyone has used these and if they are any good? will they produce a good amount of bass? ps seller did not list how much he wanted for them

is the PG tantrum 1200W too much for a magnum 15'' D2? I've seen some birthsheets that have 1500+ watts on this amp. I want real nice SQ in this setup any other suggestions under $400 for an amp? thanks.

Anyone know where I can get rubber gaskets like this for 12's? http://www.avforums.com/forums/attachments/diy-subwoofer-build/153447d1261267076-dual-15-push-pull-diy-build-gasket.jpg

I saw the prices were marked out on the website, what are the new prices??

hey guys, i'm really leaning towards getting a 12" D2 for my system right now, but i got a quick question. i'm planning on powering it w/ an avionixx 800.2 (1x800 watts RMS bridged @ 4ohms) in a sealed enclosure ~1.6 cu. ft. will the D2 still sound clean and moderately loud w/ this little bit of power? i'm going for LSQ by the way.

post your complete set up (subs, amps, box details) and the car its in. I want to see what everyone is hitting. Also if you know what kind of set up the guy is using who hit 150+ withtheone 12 let me know

I have an old RE 12 that I had no Idea what the model number was and so forth so I emailed some pictures to the Fi-Recone email. They informed me that it is the SE series and RMS's around 600 watts. What Recone kit would be best for this subwoofer and would it be cheaper for me to purchase the recone and do it myself or just send it in to Fi? Your help is much appreciated, I know there is a probably a lack of information but that is about as much as I know about the subwoofer.

k im preparing to do a sound competition i had a custom box built for4 kicker l5's, but the company i ordered my subs from accidently sent me 2 l7's and 2 l5's will that mess up my system by running 2 of each i will b running 2 1000 watt amps both at 1 ohmso 2 subs to each

right now i have a decent setup which contains. (2) rockford fosgate 450.4 amps (puts out 225 rms to ea. sub when bridged) click here (2) mtx Jackhammers (400 rms) 6x9 Kenwood Speakers (125 rms) i plan on selling my mtx subs and upgrading to (2) 15 inch subs. i want louder sound. higher lows. and an overall higher spl. correct if im wrong but i believe 15 inch subs are louder then 12 in subs. so heres my question. since CRUTCHFIELD has a BOGO on their subs. i plan on buying ethier the rockford fosgate 15 in sub (200 rms) click here or polk momo 15 in sub. i can buy dual voice coil or single voice coil.(400 rms) click here price is the same so that doesnt matter. just wa…

What would be a good amp for 2 kicker cvr 2001? Sealed box stock electrical

what are the differances if any of the old mj18 and the new mj18m?

Need to find a set of 12 that have the same sound performance of a Kicker L7 and about the same price +/- 50 dollars. Cant do PowerBase because the shop where I live drop their line. Most of the music I listen to is Screw and chopped and no Mike Jones!

does anyone know what the projected date that the subs will be sent out. i pre-ordered a 15" and am so anxious to get it.

Does anyone know if a x or zv4 recone and basket will fit an ia death penalty six axis motor?

I like for my lowest bass to be very strong. I'm not into the high/loud bass that you hear from street beaters. I'm very interested in the 2 Q 15's but since i have stock alt(2000 grand marquis) I doubt i go any higher than 1500 rms total for them. Which makes me think i'd waste them. Are the SS series subs as good with the low notes with that much power? I'm going sealed. I like the sound of subs in 4 cubes per and bigger. thx for any input..oh yeh, i also have the L7 on the list however my friends tell me the FI subs would destroy them

with 4 18''s and 30kw i needed to put some highs en mids. i gonna run. 8 sets ( coax 5inch) total 16 speakers 2 sets ( mids 6 inch ) total 4 speakers 2 sets ( extra tweeters ) total 4 tweets. wat will be the best way to run them, than i mean with the amps. i have already 1 4channel amp (rf t8004) what kind of total setup will be the best to run the front part? thnx

I want to run my ma audio SY7011DX amps as master/slave to 2 21" Incriminator Death Penalties ( which my ohm meter says are 1.5 each coil) Will they handle it?

I'm just looking to hear what other people's preferences are about full range / component speakers. My system is getting installed next week and after MAJOR hassles trying to get Memphis to send the right speakers and amps I'm going with all Infinity (a mix of components, full ranges, and an amp. With 2 15" LIs and cadence amp for bass). I've had Infinity speakers before and liked them quite well for the price, but I hear lots of people say they are too loud on the highs and have no midbass (with a definition of midbass being below 100hz). To me full range speakers should not go below 100hz, and in fact I've often put in bass blockers at the 100hz level. I think a good …