Subwoofers / Speakers

I want 4 sundown sa-12 but i want to eventually run 2 on one aq2200 and 2 on another aq2200 at 1Ohm each. Do i need 4 2Ohm DVC subs or 4 4Ohm DVC subs? Also is there any way i can run all 4 off of one aq2200d at 1Ohm until i get another one?

Has anyone ever built one thta fits in the well? I need to get 4 cubes out of it somehow an paying for someone to build it doesnt look like its in the budget :-)

THIS YEAR I WILL BE PUTING A SYSTEM IN MY 95 MAZDA MILLY...AND I WAS WONDER IF I CAN GET SOME OPINIONS AS TO WHICH SUB WOULD U THINK ..SOUNDS GOOD IN A 4TH ORDER BANDPASS 4 THOSE WHO DONT KNOW WHAT THAT IS...ITS THE SPEAKER PLAYIN FROM A SEALED CHAMBER INTO A PORTED CHAMBER 80

What design is better a 4th order ported box or a 4th order passive radiator box with a one to one ratio (passive to active). The radiator seems to have so many more advantages... so why does everyone have ported boxes?? looking for some ideas and opinions on this, might redo my box soon.

I know every sub dont do very well in fourth orders , so what are some subs that will do very good in a fourth order? just to throw it out there,I see some people that are somewhat quiet then on the other hand i see some people with two subs that have the whole vehicle flexing. I know box design play a big part also

I don't know what to put in my dash, it has stock 4x6 speakers, I want to try to do a 4" comp set or something like that, or should I just replace with coaxs? I know they make plate speakers but I don't know which way to go. I want a good clean sounding front stage with alot of bass, and crisp clean highs too. Help please.

i was just looking for a price for the DC lvl 4XL woofers, i tried calling and i just got an answering machine thank you.

hi all i have a buddy just getting into car audio and hes looking to upgrade his juguar xj8s sound system the monly problem is he wants some bass but his gas tank completely seals off his trunk from his cab so nothing gets through. so i am looking for a 5.25 inch set of comps that have some strong mid bass to hold him over the only thing is he doesnt want to spend over 175

I am beginning to look a good component pair to put into my factory 5x7 location after I sound deaden in a couple weeks. First, Does anyone think I can fit 6.5 woofers into a Ford Focus 5x7 hole without much fabrication (meaning adapter plate or MDF ring). If I can't fit a 6.5, how much is lost by going to a 5.25 inch set? I am really lacking midbass now with the 5x7 type-r coax's that came with the car. Hoping that sound deadening and a decent set of components will fix that up. I will be powering the set with an Alpine MRP-F450 (70wrmsx4, or 200wrmsx2 bridged).

anyone suggest a compent set/ woofer 5.25 that sounds better than the polk momos that I have now Looking for a little more mid bass from them and good crisp and clear mids Thanks

hey does anyone know where to find some grills for a set of 5.25" components i'm looking for some fancy grills not just the mesh but having a hard time finding some??

Is a JL 500/1 be enough power to really pound my mag 15'' D2? Also is there any other amps with comparable features/sq as the 500/1 for a less price and maybe a few more watts? I really like the 500/1 and have got many positive reviews. Does anyone have a birthsheet on one of these puppies?

Will 500rms make a Fi 15 bl sound good?

I know I beat him to it, but he can add more if he wishes. But here is a picture of Hollis's 502's with a Magnum 12.

Hello all. This is taken from my site. So the smileys might be different. ------------------------------------------------------------------------------------------------------------ Well I was supposed to be working on my car today. I didn`t Decided to wire up the Directed 1100d to the system an got carried away with the bass. Woah!!! Played SLAM & I nearly had a heart attack!!! :help: The bass is absolutely mental :earmuffs: :earmuffs: My missus ran out of the house to say the whole house was vibrating So there`s me sat in the car listening to the tunes at a much lower volume setting now. I did a few videos too. Sorry about the quality - the video doesn`t do the …

I drive an Eddie Bauer Explorer and just recently added a 12" Icon and Sundown 1000D to it. It had the Mach Audio system in it already. Well with the added bass, the speakers just can't keep up. They were fine with the factory 8" sub but are too weak now. Here's the thing, since it had the premium sound, I can fit 6x8s in my front and rear doors. I listen to mostly metal and rock with a little bit of rap. I'd say like 80/20 rock vs rap. Should I put 6x8s in the doors for extra midbass or should I just use 6.5s? Also, Ill be staying passive on these as SQ isnt a huge priority. Just trying to get more volume on the treble side.

After rocking a DC lvl 5 15" now for about three years or so it has finally gone on me. I blew the voice coil the other day and well its time to move on... I know I can recone it and probably will do that and sell it, its time for something different. I am thinking about 6 8" subwoofers for about 300 square inches of cone area. Seeing as I am limited on trunk space, the box will equal about 4.3 cubic feet and that will give me enough room for my amp and bats. With the lvl 5 on full bore, I was staying in the mid to lower 14v so I figure I am good on electrical for now. I will be pushing these 8s with a SAZ-3500D and probably wire the subs to .66. If I do that I will have …

Hey all. So I was wondering if an AQ2200 would properly power 6 American Bass XD 12's. I have 2 XD's right now and I'm wanting more. Let me know what you guys think please. Thanks and Merry Christmas! HawkEye

anyone know of any good 6inch subs around? I am looking for good sound quality and pretty good low end as well.

I have a ia dr on prob 6 or 700 watts. The amp is a brutes 1200 soon to have big 3 and a yellow top under the hood. Space is no problem I have a 07 trailblazer. I like my 12 but I want to be louder.I was thinking about 6 12" or 6 10" skars at one ohm so prob about 200 watts to each. Would this be a good upgrade cuz I really wana try the skars out

Hi, I currently got a killer deal on two 6x8 speakers (it was the speakers or wait to get paid back...) I was wondering if any of you guys know a nice simple tutorial, or just an easy way to install 6x8's in 6x9 slots. Also, I have stock speakers (pretty sure its non jbl with 6 speakers [06 camry v6 LE]) If I were to replace only two of my stock speakers for now, what would be the best way to go, back, front, etc?

I have an idea what the majority is gonna say but i'll ask any ways. What better for SPL 6 XCON 10'S or 4 ZCON 12'S.

Ok guys. Subs are in the mail. Mono and 4 Channel amp will come with my next two checks. (RE SEx 12, AQ1200D, AQ4x90) As for the money I have now, I need 2 pairs of speakers. I have an Explorer, so 6x9's are out. I'm leaning towards 6.5 coaxials for the front, and either a cheaper pair of 6.5's or 6x8's for a rear fill. There is a hole already made for a tweeter in the door (as the car has a system in it already), so components would be a great choice, EXCEPT....I'm working in a semi-limited budget (not willing to spend more than 160 on both pairs). With all that said, I have two choices picked out. Rockford Fosgate T1652 for front, and P1653 for rear. Still a skeptic tho…

I am looking for some high quality, high efficiency, 2 ohm 6 1/2 components for my GTO. They will be running off of a US Amps USA-4300x. Sound quality is most important with output being a very very close second (hence wanting 2 ohms and high efficiency). So, any suggestions for high quality (in sound and build), high output 6 1/2's? Price cut-off is < $500

What is everyones favorite and best bang for buck? Thank you