Subwoofers / Speakers

OK,Ive got an SE 15 with a bad coil.I used to run a shop with my brother and we were authorized US/RE dealers.A kid brought this sub back in and we replaced it,well this was about 2 years ago and we never sent it back in(the shop cosed down).My question is can any of you guys repair this or can I get something to repair it myself.If so please let m know,and how much it would cost.Maybe if I get it fixed I could sell it and put that towards some Icon 10d4's.

I have 2 Fi ssd 12's that gave up on me finally. I was wondering what would be the best way to get them reconed? I have a Memphit The Mojo MC200D Amp it is 2000X1 at 2 ohm rms. Would I want to get the dual 2ohm or the dual 1ohm to run to this amp?

I've been watching videos of them for over a year but haven't heard one in real life, yet. Has anyone experienced one before? If so what did you think of the quality of music it reproduced?

can anyone email me a Win Isd file for a 15 inch and 12 inch magnum at [email protected] please. and can you tell me if WinIsd is accurate wth magnums. i know with the ED A series subs it seems to be off. im using pro alpha edition. thanks

just wondering if anyone has had experience with audioque mids and highs along with there 4 channel amp

Merry Christmas to me indeed. I got a new Sundown Audio Sax-1200d amplifier, a new Skar Audio VVX-12 Subwoofer, a KnuConceptz 4ga mono amplifier kit, and a custom made 12" Ami-Creations ported subwoofer box for the trunk of my 2005 Honda Civic LX 4 dr. The box is about 1.95 CuFt after sub and port displacement, and the box is tuned to 32 hz. I am planning to run the SA 1200d at 2 ohms to my sub, which should give me right around 750 wRMS. I am extremely excited and am going to perform the install Monday, as i am off work all week for vacation. I have posted some pics below from this morning:

What you guys got cooking? I want to help a buddy of mines make an enclosure for them but we have no specs on them aside that they are made by GS Redline?

hi, i am looking for box design for 1 pioneer 309 can anybody provide me with one ported box as i have no skill how to do it correct thnx

Recently got my D7506 in. Pics are in the amp section if you want to peep them out. This is my question. I'm going top end for my system. I want this to be my last system for a while. I have been into car audio for 15 years and have had some pretty serious installs. I never competed in a competition. My goal this year is to take home at least 1 big ass trophy for a SQ system. I started off with this chit, Audiocontrol MVC, Audiocontrol 6XS (which I may not need with the Diamond - hence 3 seperate fully active butterworth x-over's on the D7506 alone) (2) Audiocontrol EQT's, the D7506, and the D7402. Sub will come later on. This is my question: I currently run a s…

Question whats the difference between the 2 hds300 series on their magnet? what is the difference?

I remeasured, new box dimensions are 34 x 30 x 17.5 total interior gross is 8.57 cuft. Port is 6 x 16 x 28. 1 cuft total port area. Do I need more port area? Any suggestions, this is my first box for large drivers. what kind of bracing should I use?

I've got a 2000 Dodge Dakota Club Cab. I was wondering if anyone has any idea how much air space I can get under the rear seats? I don't have a problem ripping out the jack holder, storage tray, etc, but I really don't want to do any kind of modifications such as lifting the seats and such. I did find a Q-Logic enclosure for a single 8" sub that is .35 cubic feet. I know that MTX makes Thunderforms (or whatever they are called now) that hold 2 10's, but I'm having trouble finding what kind of airspace they run. These were just for references. If I can make it work I will build my own enclosure. The thing that worries me is finding a GOOD sub that will fit. I'm loo…

This is a re-post of my MAW-10 Ported Subwoofer Project. This subwoofer performs very well, producing nice tight bass. The rear porting gives some flexibility to adjust the response by moving towards or away from a wall. The MAW-10 driver easily soaks up all the power that the small plate amplifier can deliver. This subwoofer design easily outperforms my 10" JBL PB-10 subwoofer and it integrates very well with my Fostex FE127E Sealed Bipole Project. Over all, this sub performs very well and it makes for a simple and inexpensive project. Pictures and enclosure details are available at: MAW-10 DIY Ported Subwoofer Project. Cheers, Gio.

Friend of mine gave me 2 locked up 9515's to pay off a $250 debt he owed me. I ordered 2 recone kits as my friend says he could rebuild them. I gave them to hit, he reconed them, and they play. Well, one speaker makes a crackling noise at low volumes through it's whole range. At low volumes I can only hear it on very low notes and at higher notes. Did he do a poor job at reconing it? Is it something I did? Are the magnets misaligned? The other speaker is barely audible, I'm thinking that one might be a wiring issue. Any other info needed, just let me know.

Not much else to say here. Look for a full review up in the coming week. Level 4 12 D2 ohm coils Very nice packaging Vinyl graphic included always a plus 2" thick cardboard Sexy Dustcap Close up of raised lettering

This is for a friend this time, not for me. Anyways, he just bought an autotek SM1-1500 (street machine), pushin 375 rms in 4 channels at 4ohms. Lookin for 6.5s in the front and 6x9s in the back, tryin to spend somehwere around the $200 range for each.

I have a 1997 grand am and it came stock with tweeters, the door speakers are 4x6's. Tried a search for it but came up with nothin. How do I go about upgrading them, do I upgrade the speaker and tweeter seperate or what, do they have a factory crossover. Thanks for any help.

So I have a JL Audio 10W3v3-2 and it was making a weird scratching noise. Completely random, would happen at any volume and would come and go with no real reason, sometimes it wouldn't do it for days, sometimes it would happen many times a day. I took it out of the box looking for some explanation and could see nothing, so it cut it open. The only thing that looked a little off was what looked like some corrosion on the coil itself. So now I have the motor and basket just laying around and it seems a shame to just toss it. Does anyone make a recone other than JL that will work??

Hey guys. I have the Kenwood Excelon X1R amp and am looking for some new subs to put in the trunk. I have really been looking at AudioQue. I like the way there stuff looks and the prices. Its looking like 2 12 Sdc2.5's in a ported box (if the room is available). I was wanting to see any other suggestions for 2 12s in the range of 300-350 and also wondering who has had experience with these and if they were loud for spl. Thanks

Can i use a jl 6" w3v3 or maybe even 8" in my car for midbass drivers?? or would it not really make a difference? 2 12" ssa xcons off a saz-3000d. But i still can't put my hand on whether i want 2 12's or 1 15 ... would 2 6" jl's be good for midbass drivers though? like they can just fill the front of the car with a little more bass both are 150rms each.

This may have already been posted, though I didn't find anything on a search. An interesting read I thought. Ascendant Audio SMD review

Sister want to up grade the system in her 2005 Nissan Altima there will be an Alpine headunit. As for the doors and rear and her single 10 she dont know which way to go. So far she side she like Focals and Infinity for the doors and rear but which one will be better for everyday use? Will be back on the sub.

Hey guys, I'm looking into getting my dad some new speakers for his vette. I'd like to get him something that has good SQ, around in the 2-300 dollar range. It would still be ran off of the stock head unit. I think its got 5 1/4" in the door with a tweeter in the top of the door panel. I would probably also look into putting some deadener in the doors like second skin or something. Whats your alls suggestions?

How should i build a box. Car is 03 crown vic. Subs up port back. subs up port up. subs back port back.

If i want to connect sub-woofer to my car audio then what should i do first?which kind of cable do i need for this?I need clear,perfect sound quality.