Subwoofers / Speakers

i have an audiobahn 4002T amp and i am gonna be getting some money from my scholarships that i didnt use for tuition. i dont have a whole lot of money and i am runnin stock battery and alternator so i cant go too many watts. i may get a new amp someday, but if i do it wont be over 600 watts. anyways, i have 400 watts bridged at 4 ohms and i am trying to figure out what sub i want. i know i want 1 12" and a ported box tuned to 30-32 Hz. i want pretty decent SQ, i want it to hit low, hit hard, and get loud. so basically LSQ. i am between the RE SX and the Rl-p but i just cant decide. since the SX is only dual 4 ohm, i can wire it to 2 ohms or 8 ohms. i am a little worried …

as my sig says...i did run two 15" treo ss's off a single memphis 1000d in a dodge ram..... now i don't have the dodge..the memphis is sold and my treo's are sitting in the garage.... here is what i am wanting to do....two 15's, either 3000wrms or 4800wrms to the subs (depends on what amps i decide to go with), iggy altenator, 3 svr batts(one under hood, two for the sub amps) a 6.5 componet set and around 150 wrms for them.... now here is the reason for the post....... i am considering 2 15" memphis mojo max's...2 memphis 1500d's or mojo's...memphis sq componets and a memphis pr series amp for them(maybe a 4 channel so i can run a pair of m series 8's for mid bass..dunno)…

hey guys. Trying to find a new set-up here (sub set-up) and am looking around at my sub options! Currently I am running an 18" BL in a 5.5ish box @ 35Hz I think. It is pretty dang loud...but I am starting to go away from SPL based to subs that are able to reproduce the sounds a bit better. I have recently acquired a pair of Adire Koda 6.5 components and am hoping to blend things. The BL would pretty much destroy any midbass that would be output with them and I really wanna do a proper(ish..bear with me guys haha) set-up of an actual "sub" crossed over at 60Hz or so and then hear some real midbass. Here were the subs that I was looking between. Currently I have a JBL amp …

:bigclap:

If i wanted to purchase multiple subwoofers even if i didnt want the same sizes, is there a discount?

Hi all, I have a BTL n2 12" actually, and I love it. but I want more now ! I was thinking of reconing it to a 15" sub. Can you tell me what I need to buy from Fi, of course ? Recone kit, basket ? Is it hard to do ? Can I find a tutorial here or elsewhere (I'll try Google !). I won't do it myself as I am not very familiar with speaker recones and tools, and ...anything !!! a friend of mine will do it, but I want to know some things before. I already have a design for a good box. It must be around 3-3.5 ft3 net @ 32 Hz ! Thanks in advance for your help.

I've decided on a FI SSD 10" for my sealed application. Will be running two of them off an AD2200d. Trying to decide whether or not the cooling option is necessary. I'v decided non of the other options are really necessary but would appreciate input if someone thinks I'm mistaken. Daily driver, not super loud all the time but I like to rock out when I feel the need. Thoughts?

im looking at getting either two Sundown Nightshade, two IA DP or two DC Level 4XL all 12in. im unsure of which two to choose. ive read good things about all, but i cant test or hear any of them since no one around here has them. i was wondering which would you choose? i wont compete i just want a loud daily driver. i preorded a Sundown SAZ-3500D to power them. any input would be great thanks guys.

I'm trying to find out about something about subs. If I have a dual 1 ohm subs can I change them over too dual 2 ohm. I have 2 12" dual 1 ssa zcons. I'm looking for another one or two more used and if I find one that's dual 2 I would like too change them to dual 1s. If anyone's trying to sell there 12 ssa zcons hit me up

I just got a 2003 toyota celica gts and am set on getting a 12" SSA ICON D2. I am going for SQ and dont know whether to get a ported box or sealed. Also, I have heard that facing the sub up is a good idea in a celica because of the shape of the tailgate. Anyway, i need to know info on the box and what amp to get. My budget for the amp is about 150. Thanks for your time in advance.

Can anyone tell me what other subs have the same basket as Assassin's before the FI buildhouse thingy happened? It's about 1 year old I guess maybe a little more. The ultimate question would be what beefier 10 can I put in it's place without it getting any wider at the magnets? I've got a center console box in my truck and the width is the limiting factor not the depth. I'm looking for LSQ approx 1 cube sealed. Magnets have to be less than 6.5" in diameter.

How do you wire a 15" IXL to a 1 ohm load? neg-neg- neg on amp and pos-pos- pos on amp?

well i could really use some help with my box design.. i ordered a 15 Xcon on monday and i want to start on the box for it.. i have a table saw and router and have built a couple boxes before.. but i am kind of new to this and want this box to sound good,, it will be going in the back of my 06 ford-f-150 fx4 supercrew.. i plain on putting it were my small side rear seat folds... i would like it to be 21x21 then 27-26 tall. ( sub on top ).. i would like it to come out to the 4 cu.ft ported.... they say 26-33 hz..... i listen to mostley rock...hard rock... but i like most music that sounds good.... i love good bass... i am not very good at figureing out all the math...…

So i got a new clutch/flywheel put in my car. My mechanic put my old parts in my trunk which i forgot about. My sub doesn't have a grill and that box full of parts broke the 10" ssa dcon rubber surround and even the cone. I tried using silicone, but the sub sounds like crap! Can i get a new cone and rubber or should i start looking for a new 10"?

Hello folks. I wanted to get some opinions on 8inch midbass drivers. I'm changing up the front end in my Dodge Durango. I will be running 4 Diamond Audio M6 4inch midranges and a pair of M&K softdome tweets. They will be actively passed at 250 up at 12db per/octave. One set of mids and the tweets will reside in custom pods on the front corners of the dash(tucked in between the dashboard, A-pillar, and windshield so they can be on-axis and facing the passengers) and the second set will reside in pods on the upper front corners of the front door panels. All will be laser aligned to a center point about a foot past the front seats. The midbasses will be located in the lo…

ok so i got my sub running and i love it but there is many settings on the orion 1200d amp what do i set my crossovers at? my box is sealed at 2.65

So, I had some extra 6.5s sitting in my garage and was hopin i could use those in my truck, turns out i would have to do some pretty major work to get them in there due to the way the door is built, so i think i will just go with some of the same size, some 6x8's....does anyone know any good 6x8s before i end up going with some RF power serier component 6x8s? thanks

well i have built some new 15's too go in the rav4, and once i get my alt, i will be throwing the second saz2000d on them. right now i have one of my ultras in there and she does sound freakin good i need too break out the tl before i pull the ultra out though. some build pics and i have some vids that will be ready tomorrow of some of the build, with short explanations of one of my methods. the cones are salvaged from some damaged sdx 15's i have don't mind the pieces of foil that gets removed before the final glue in and in this pic is a stiff paper dust cap i glued first, as the final dustcaps i used were so big around, and the profile is so shallow that they ar…

I have a 1994 GMC Jimmy 4-door. I am looking to replace my factory speakers. I have 4x6 speakers in the dash (not sure of mounting depth, could not find that spec. anywhere) and according to my research 6 3/4" in the rear doors (again not sure of mounting depth). This will be the first time i go with components or run the speakers off of anything but the head unit. I will be using an old rockford 2 channel amp to power the speakers, it is 100.2 (if memory serves). I need help choosing speakers to fit in the stock location. I would like to keep the cost ~$200, but i can go more if need be. I am open to all suggestions since i am a noob when it comes to this. So an…

I currently have one x12 running on 400rms in a ported box tuned around 33 or so. I amhoping to purchase a hifonics brutus brz.1800 and i would like to increase my cone area aswell. I just dont know whether a ssd15 probably stock no upgrades.. Or 2 x10s when they come out... I would port it either way. And im hoping id have room... I would make my own box and id just make it fit... So what do you think? 10's or one 15? Btw imnot 100% set on fi... Just i do have experience and i was very happy. But if anyone has any other ideas pleas let me kknow! Sorry for bad spelling... Im on my ipod.

Where can I buy these Mach Audio MLI6.5? Not in the SSA store right only from the mach5audio.com website? I am also going to get some seas tweeter. I have an eclipse ea4000 so the woofers will be getting 75rms each and so will the tweeters. My headunit is a sony cd700 or whatever with graphic equalizer etc.... can I go active with it? Just with the headunit? This is my dumb idea. Cross everything over at 75hz and then play the woofers and mids, but obviously that isn't right? Anybody give me a hand or point me in the right direction if I'm doing this right? -Andres

i am gonna build a box sealed and i have just purchased a used 15" mag off a guy for a good price. i want the volume to be 2.5 cubes and have figured out the size i want to accomidate it in my chrysler 300 trunk. the measuremants will be L 24" H 18" and W 10" which comes to exactly 2.5 cubes and i want to know is the width of 10" enough since it requires a mounting depth of 8 1/8"?

Im planning on getting the sundown SAX 100.4d and running them to some alpine SPR-60c in front and SPR-60 in rear. Will this work out? I dont know too much but will this amp work with these speakers?

Hey.... I recently sold my BL 18'S and want to either go with a BTL 18 or an re xxx 18. I am wondering which would be better in my application..... mainly spl oriented set up to be used daily. I must say I loved my bl's and don't know much about RE subs. Thanks

I am currently getting all the peices together on my new setup. I will be running 3 12" Memphis pr's in a ported box. I believe the box is tuned in the low 30's. Stock alternator, and a ed Nine.1, giving each around 400 watts a peice. it's going into an extended cab truck.... anyone have a guess at around how loud this setup is going to be? i'm just curious at what you guys think.