Subwoofers / Speakers

like my title says. someone offered me 2 15" mtx 9500's in a nice ported box for just my 2 solo x's. I used to have 2 12" 9500's and loved them but had to seel due to my financial state haha. so what u all think? i only have 300 in the x's. is this one of those deals i should not pass up???? NEED OPINIONS HERE!!!

I have been looking at the 15" FI Q for a while now and was wondering if there were any others out that i should consider. As far as an amp I was looking at the Sundown Audio SAZ-1000D. It will be going into a toyota tundra with the access cab. I will be taking the back seat out. Also I have stock electrical, would i need to do anything with it?

have you ever thought about offering the mj's in diffrent sizes. its an incredibly priced 18 but not everyone has room for and 18. i think they would be great budget subs. they have decent power handling and xmax so it would be a great alternative to the over-hyped type r.

I just got a old kove audio Armageddon 15 in Sub and can' find any information on it deas any one know the specs and watts/rms

With the BTL being fully loaded and the HD being D2, which has the best ability to create the highest spl in a proper box with 2 Audioque 2200's

I am looking to replace my 6.5" components that are in my front door. I currently have Boston acoustic pro60se and have blown my mid bass woofers due to way to much power (who would have guessed haha). I have the new T1000-4 amplifier and the birth sheet says 394 rms x 4 at all impedance. I'm looking for a set of components that can handle all of the power and sound really good doing it. I have been looking at the jbl 660gti because they claim they can take a max of 600rms per speaker/tweeter. I want to know if anyone has heard these speakers before. I also am curious about the morel hybrid ovation II because they also claim to handle 600rms max. Has anyone ever heard the…

with shipping the hdc3 is 339 and the bl with the ups i need will also be 339. i am getting the hdc3 with copper coil... if thats what i get. i have an AQ2200 amp so i am wanting a pair of 18s.... i have been told great things about both subs. i had a BL a month ago and it was great. but i want to be smart about this and get what is best for what i am going to be doing to my car. the hdc has a xmas of 17-19 mm were the bl has like 21 i think. the bl also has a higher sensitity of 92.6 and the hdc3 has a sensitivity of like 89.something but just because it has a higher xmas and sensitivity does it mean it will be louder? i am going to buy a pair of 18s but which one of the…

Running them off a 100.4 and Pioneer 9800. Filter on the headunit is at a 6 db slope. Gain set around 75 rms, LPF is 2500hrz and subsonic at 200hrz. How do these setting sound? and also vocals can be heard through a speaker like this? Just curious

is it true when you first install a sub and run it for the first time it's best you should not play it at full power for a while.the reason i ask this is because i was never told this by anyone before you had to do this and i wanted to make sure since i been playing my sub at full power for like 4 hours total since i had it and i can tell the sub is not real stiff after playing it for a while ?

Hey guys. I'm trying to piece together a 3-way active front stage in a friend's car and I need some help in selecting speakers for this application. The car is an '06 VW Passat if that is of help more than pictures of the A-pillars. Planned locations are A-pillars for midranges and tweeters and doors for midbass. Processing is going to be done by a car pc, all software, no limitations there. Power is going to be plenty, 100w@4 ohms for each midrange and each tweeter and 200w@8ohms for midbass. Odds are that the actual install is going to be done by me so atleast the doors will get a good treatment. The main goal for the install is to build a very good sounding front st…

I have the discontinued infinity reference three way six by nines. There's a +3db switch on the tweeter housing, are they normally attenuated, or how does that work? i was thinking about turning the switch on, and i wasn't sure if it may cause any damage? I have them powered by a 2010 Rockford P400-4. Their nominal impedance is 2.67 ohms so i would think their getting decent power.

So why is this forum host of two different brands did the creator of one company buy out the other one or something? The subs look almost the same.

Hey guys. I noticed the prices dropped a little bit on the new TC Sounds drivers. The LMS-R 12 is now $269. Anyone here have any experience with the newer TC drivers? I know the old ones were well praised. How would the lms-r compare to an Icon? I am just always curious and noticed the price and I just started thinking.

well i did it 5 minutes ago... $350 sent to SI for my 15" and i couldnt be happier (even though i've never seen or heard any D2). im getting prepared to be blown away. man i gotta sit down... anyone else crack yet?

ok I'm planning my next system right now. (last one got stolen) I'm thinkin 2 RE SR10's ported going under the back seat of my '02 Ext. cab silverado. Realizing there is almost no room back there I figure the best plan would be to build two different enclosures for each side. Doing so would give me about 0.88 ft.^3 per sub after sub displacement. But to make these vented I'm thinking could make external ports over the transmission hump. Does this seem like a bad idea?

just got Rockford Fosgate P1-1X12 its a ported enclosure made by the manufacturer, so i assume its decent enough of a port design for the subwoofer. i know ported makes it so its more difficult to hit fast notes. but i feel it really muddles the notes together and very little separation on fast bass notes. any way to improve this? i believe the gain is set to around 75% and the low pass filter is around 100 hz. the subwoofer is rated at 250 RMS. my amp is bridged and is rated at 300 RMS for the bridge. and the subwoofer is rated at 25-250 hz. would it be better to raise the hz on the low pass filter to around 150 or 200? or should 100 be fine? …

kinda downgrading, or just changing rather from a Punch 5002 feeding 2 Punch stage1 12" i wanna get one sub probably in a sealed box to be fed by the 5002 im looking for sq over spl, so like a more sq side LSQ sub is what im looking for. preferably <$200. the p5002 amp can do 500Wx1 @4-ohm bridged, basically 4 ohm dvc sub right? or am i wrong im not quite sure how the grand spectrum of products are. in my nubness, i imagine rf and jl at the expensive and prety good quality end? i'd like a sub thats quality first rather than value. how do alpine kicker jl compare? please feel free to "rip me a new one" cuz im really just a nub at this stuff. wondering about boxes too. …

I'm trying to figure out what to get for a good sound system in my Escalade. I was thinking about getting 2 12inch cv stroker's,(any opinion on these). for the doors I was thinking about a boston acoustics components 6 1/2's not sure about a deck, back door speakers, and amps for speakers and the subwoofers. Please help. Speakers pairs not more than 300 bucks subs not more than 300 bucks a piece amps not sure imagine they'll be at least 500 but I want to keep it around 3500 dollars give me your ideas with install so.

I was originally going to get the Sundown SA series but I saw the AQ's and was wondering if they sound good and get loud? Plz be detailed because I haven't heard ether in a setup. I know the sa's meter well for there price point, but I want 2 18's or 3 15's if sundown gets some d4's. They will be powered by a aq2200d.

ill have about 100-130$ for deading front doors. ive got a dynamat extreme 36^2 foot (bulk) kit in the trunk. which is enough just barly enough for my arsensal. what would be a good product to cover front doors with my budget? i was thinking about getin another dynamat extreme bulk kit for doors.

Have at it fellas: http://www.stereointegrity.com/SI12.MOV And yes, that's 3" of throw.

Is there any subs that will out perform a sp4? I mean I'm trying to avoid going with this simply because the waiting period I've been reading about this sub since it first came out.. Versatile Ported Sealed 4th order Massive output Takes well above rated Solid build Sexy looking (lol) Under $500 Very good SQ

I know this is Hybrid Audios Forums, but i do need some help. I am between three brands for a good sq setup for the front stage in my 1997 Lincoln Towncar. Scan Speak, Zapco, or Hybrid Audio. 8", 4", and 1" is the sizes i have been looking for. I want the best for under $1500.

Frankenwoofer aint scared of nothing! First burp Second burp

First time going active and need some help with aiming tweeters. My vehicle is a JDM '12 Subaru Forester XS. H/U is Alpine CDA-9887. I've got SSA Evil tweeters in my A-pillars (in swiveling metal pods) and SSA Evil 6.5 mids in the front and rear doors. They're all being ran off a SSA IC150.4. Tweeters are on CH 1/2 and mids (x4) are on CH 3/4. Where should the tweeters be pointed/aimed? I've read several articles but they all say something different (point at the driver, point at opposite headrests, aim between seats up at the headliner, etc). Is it just trial and error? Anyone with these tweeters or helped with a system with these have any advice? Thanks. Oh yeah, …