Subwoofers / Speakers

i dont think my car will handle my 1200d amp.. if i switch to a 600-700watt amp will that still get the 15 MAG moving good. any harm done underpowering it?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...AMEWN%3AIT&rd=1 $100 shipped. I'm still hoping they'll come up with some 15's

im thinking about doing an active front stage, and i decided to use a Vifa XT25 1" large ring radiator for the tweeter: http://www.zaphaudio.com/offaxis-XT25.gif and something for my midbass/midrange.... i was going to go with the Ascendant Audio polymid which would mate perfectly with the Vifa, but apparently they are out of stock. i was also looking into the RE XXX mids, but i have read that they do not perform as well as they are hyped up to be. they get low, but the midrange is lacking clarity... other drivers i was looking at were: The Seas Reference (RW 165) (freakin expensive) or The OLOGY delta i am looking for a driver that can play low (below 80hz ported or sea…

Remember this thing? Sorry these photos are old. I`ll take some new ones as soon as possible. My hard drive blew up & I lost all of my photos apart from the ones on PhotoBucket. ANYWAY: Thank You! Stereo Integrity:-) These 15" Magnums are amazing subs. My system is not walled and it`s very, very LOUD. I`m very happy. Running in the subs at the moment so they`re pretty stiff. Using only 4000wrms and Tuned to 33Hz. The system is hitting 150.7dB (Term LAB). With all windows & doors shut. Straight outta the box & 1st time being played LOUD. No test tones. I was messing about, playing MUSIC With the batteries on lower charge than usual as I had left the Pow…

Just wondering what country these subwoofers are made in.

Other than the space it would take up. Would the sound be different in a box thats 2.5 (per sub) @ 32h vs. 3.5(per sub) @ 32hz?? Same power, same subs, same everything. Thx

Want to run 2 sealed. Requirements: 4 ohm final. Take 2000w daily. No ridiculously large box. Reasonably priced.

ok ladies and gents...Nick and his dad dropped the car off last night at my place, and i'm just now getting around to getting all of the materials rounded up for everything that i need. I'll be posting pics later of the tear down of the car and the current install that is in it and the prep work and hopefully we'll have a fiberglass tub for the bottom part of the enclosure and the start of the top done tonight. Pics to come...so don't do the this thread is worthless without pics...gimme a few hours and ill have some up! subscribe...and check the progress!

amp for my 2 SI 12s. I need help finding a good amp for about $400 shipped. I bought 2 12s thinking my 1200 could run both. Later found out its only good for 1. I don't have room for another 1200w amp. So I need to step up to something that can handle 2. Any suggestions or help? TIA -Nick

Would you recommend running RL-p's as spl subs?? I have two 15"s in a ported box W/ 2.5cu., and 900w rms each. The box is ported to 32hz. I was told that would be best for an LSQ set up. I was just wondering about going from LSQ to SPL.

Yep!

i am looking at the Ascendant Audio Arsenal or 12D2 mag. i was reqamended the MAG and the Arsenal by another. i have a hifonics ZEUS 1000D 1000@1ohm, 750@2ohm 500@4ohm. i want to run it at 1ohm if i can. i know the mag is perfect for the amp but what about teh arsenal. SQ means sound quility but LSQ means??? sound quility loud?

Hey I have a 400wrms x2 amp and I'm picking up a set of Diamond Audio D971 comps. This is a dumb question most likely but the constant rating is 200wrms and the max is 400wrms for the comps. If I throw them on my orion amp pushing 400 wrms into each channel with the gains set low do you guys think they could deal with it? I'd hate to buy another amp. I can run them off of 100wrms each but then I'm not feeding them enough power....its a catch 22. what would you do?

Well, I am/was using an e8a for sub duty in my dorm room. Well, playing nothing rediculus, it was working fine. Came back from lunch, turned on a little bass. Nothing. fudge. Soo, i pull it outa the box, i have came to the realization that one coil is screwed. I have one working coil on it, so I might just be using one coil till I get around to buying an Assassin 8...I wanted one of them, but now I have an excuse. holy crap. I liked this little woofer too. Is it possible to get a recone of it? Cliffnotes, One coil on my ED e8a is screwed, one works. Recone possible? Most likely buying an assassin 8 now. -Ryan

yep...picked up an old eclipse ti 12...needs reconed. any help? not for sure what i wanna do with it...any ideas? lemme know... and yeah, it's a double post for those who don't go to the soundsplinter forum..lol.. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Hey everyone just wondering what kinda frontstage you all have with your mags? I was thinking of going with set of xxx mids and horns, or maybe do you think 2 sets of xxx mids would go with them better? I'll be running 2 12's sealed off an Orion2500D (2ohms) btw...

Do you think the Zed minilith would be a good amp to power my SI 15 or should I keep my Concept CC-D1200. TheCC1200 has a few issues but has more power than the Zed but the Zed has a nicer build and can make more than the rated 600rms. But I like to have the overhead. Also the 15 has a slightly softer suspension, correct, than the 12? So having 1200rms on tap isn't needed. Who knows.

okay ive got a mag 15 in a 2.2 cuft box sealed. id prefer bigger but its what i already had. the box is almost square but the front and back are definetly parallel. now ive got a JL 1000/1 on it... and its not very loud. i dont blame it at all on the sub. i know its capable of pain.... but i dont see how it could be the amplifiers fault. i tuned it to 64V with a true rms dmm. at 4 ohms thats appx 1030w rms or something. plenty of power for a mag to scream. when i get my ported box built and if i still think its not loud enough im going to try to hook up my friends eDnine.1 to it and see if thats a problem. but for ported boxes parallel baffle and back is perfectly fine ri…

just picked this up used. hopefully have it going by april biggest ported box i can fit is 3.2 cubes net tuned to 33 hz. gonna try that out and maybe go sealed if it doesn't work out

hey guys . im new to this forum. finally good to see powerbass gettin the word out.. i currently own 2 12's pbx . and a 1500d amp. i have an extended cab s-10. what size box do i need to build for 2 12's.. what box sze and what port. and which direction should my port be? also was wondering how should i wire it up also.. thanks if you can help me.

I dont know what to do with thei TC e12a. I had planned to have it reconed to an 18 with SX soft parts but its so sexy. i dunno. But its broken everywhere i read these things hit so loud and so clean, some say there isnt another driver made to date with the same clarity, which makes since since a flat piston is optional. But, i go back to the fact that the basket is broken. This would be alot easier if it was an eclipse. if only somehow i could save the coil or have an exact one remade, have a custom 18" cone made and have it all put togather. GRRR. Opinions? How many of these e12a's are floating around that arent blown....or can you still get these reconed somehow?

http://http://www.putfile.com/trevoreaton those are pics of my mag 15s. fedex is horrible. if youve ever seen ace ventura when hes an undercover delivery guy.... i swear they used my packages for the movie... but all in all Ben from www.showrides.net (SIs dealer) has been great. customer service 11/10! hes having 2 new subs sent to me and having fedex pick mine up at my door. if your skeptical about SI having a dealer and not buying direct, worry no more. i wouldnt want any1 else to sell me these subs, great guy. and BOSS, if its convenient for you could i get the tracking number to my new subs if you have it? id appreciate it alot, i want to watch as they get closer and …

Sup everybody, I have a question here, has any body used the 12" Pioneer TS-SW124D shallow sub? Mounting depth is only 3 1/4" and they run 350 watts nominally / 1400 watts peak. $200.00 Suggested price. http://www.pioneerelectronics.com/pna/prod...7969819,00.html What about the Pioneer TS-SW1041D 10" shallow sub, it has a mounting depth of 2 7/8", and these run 350 watts continous / 1000 watts peak. $180.00 Suggested price. http://www.pioneerelectronics.com/pna/prod...7969808,00.html I'm also curious with the Earthquake SWS-10 (2 11/16" mounting depth, 400 watt peak, $299), SWS-12 (3" mounting depth, 600 watts peak, $399), and the SWS-15 (3 1/4" mounting depth, 800 wa…

hey guys the Recommended enclosures for the 15 SI MAG is: Sealed = 2.3 to 3 cubic feet. what is the advantage or disadvantage of going with 2.3 instead of 3 and the other way around also.. any help is greatly appreciated

http://cgi.ebay.com/Image-Dynamics-OEM-Ove...1QQcmdZViewItem Anyone else get this funny stuff? Oh Ben. . . . .