Subwoofers / Speakers

Ok so i've been on the search for a tweet, i bought the morel but PE killed my order so i'm debating buying them from madisound. my quesitons? how do these tweets perform? anyone have direct experience with them? http://www.madisound.com/pdf/mdt%2029.pdf The waterfall plot looks pretty great to me but i'm sure what time is too long, i see the broad hump at 1-2k makes me think they shouldnt' be played that low, but that also shouldn't be a problem. The only thing is i heard that textile domes weren't supposed to have transients that were that good, so maybe the scale is throwing me off? Shoot me any opinions before i go ahead and re-order these bastards

Can anybody with a 1998ish jimmy/blazer/bravada show me some pics of where they mounted their tweeters and how hard it was. I recently got a set and havent found a good spot to mount them. Please tell me how long it took and what tools were needed. thank you!

i wanted to mount another set of tweeters in my door just to even out my h/u as i have my mids in the rear running off the rear outputs .... i was looking for a pair of tweeters under $100 ... they are running off the h/u so they will not be seeing over 20 rms ... i dont know if it makes a difference but all the tweeters up front are silk dome ... should the pair i am looking for be silk dome? ... also they need to not stick out so much as when i had boomer mcloud cut a hole for the door they cut it so close the the tweeter hits when the door closes ... it dosent tend to be a problem if the tweeter does not protrude to much and has some form of protective grille over it .…

I was using SEAS Prestige 27TFFNC/G (H1396) tweets for a while and really liked them. They got stolen and my plan was to either buy new ones or go with the LPGs. Any opinions? They are currently paired with a Dayton RS125-8 5" but the the daytons don't output enough for me. I threw them in my doors because they were all that I could fit. I'll likely switch them out for a pair of my MLI65s or something. Deck is a Pioneer DEH-P880PRS running active. Thanks in advance for any advice.

Is it better to install the tweeters in the dash or somewhere else? For a component set of speakers.

i am having someproblems finding a mounting position for my tweeters. If i made a box for them and mounted them on the floor but level with the bottom of seat will they sound bad? they will not be obstructed and they will have plenty of room to play. i am concerned with having a complete full sound. i want my music to blend well with my subs. they are oing in a lincoln towncar.

i'm having a problem positioning my tweeter since my car is equipped with pillar airbags. My only options are in the sail panel, kicks or the dash itself. With the sail panel, my only apprehension is that when i open the door, the tweeters might get wet when it rains ( by the way, comps are RE XXX6.5's so the tweeter is pretty open ) If i put it in kicks, i might damage the tweeter since it has no grills The other option is the dash, but I'm wondering if this is advisable. I was thinking of putting it in a fiberglass pod enclosure, something like this Is it generally better to make the tweeter face upward or towards me or towards my rearview mirror ? I'm using an Alpine…

So I am wanting to do a test with a few sets of tweeters. I am currently looking into the following, but need a few more recomendations. looking at.. Seas 27TBFC/G Scan-Speak D2904/6000-00 have... CDT DRT-25

I blew one of my focal tweeters when my amp popped/blew and need to find a replacement. I really like the inverted dome TNB tweeter that came with my 165VR's much smoother and not harsh like all of Focal's other tweeters I am just replacing them I don't want component tweeters I don't want harsh tweets can't handle the piercing highs. What do I get to replace it/them. Going in an Escalade not stock location I believe they will have to be 45mm tweeters I really don't want to redrill. Not too expensive less than 100$ preferably 130$ max. Thanks for your help

I'm going to go active for the first time and need some help. Eventually I'll pair my SSA Evil Mids and XCON 10" with Evil tweeters, but spring break is coming and I'd like to install what I have and run a temporary and inexpensive tweeter until the Evil tweeters come to market. Info: 2013 Jeep Wrangler, mids will go into the speaker pods mounted in the dash, on axis. The stock tweeter location is on 'tombstone' pods on axis on the top of the dash. I don't have any flexibility on speaker location as I frequently have the doors off. I take it off road and it gets a little wet so kick panels aren't an option either. I'll be powering the front stage with an NV…

Would you guys be kind enough to recommend a pair of good tweeters... info. Budget- $200 - $250 for the pair Would be connected to a single channel with 160W rms in parellel, 2 ohm load (active). (sax 100.4D) Prefered, (but not limited to), to buy tweeter with x-over, hence gives me the option of going active or passive. Thanks.

i need some new tweets for my RE 6.5 comps. theyre just not loud enough. i had some polk db tweets, and i really liked them, but they're long gone now. since i don't know alot about tweets i'm basing my search off of the polks sensitivity rating of 94db @ 1w/m. that is how loud (more or less) it'll be right? here is a couple that i found on ebay. if you know of something else let me know..... p.s. i only got about $25 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5786730772&rd=1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5785599027&rd=1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5785363901&rd=1 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5786702185&rd…

Hey guys I was wondering what's the difference between tweeters and image tweeters? I'm just curious. Thanks for the answers.

I am slowly getting tired of listening to my bootleg setup while i wait for the peerless hds tweeters to become in stock. Are there any other tweeters that anyone recommended/ had experience with that they feel would be a good 2 way setup with the sea excel mids. The peerless seemed to work well because they are capable of being crossover relatively slow since the excels have heavy breakup around the 1200 area. From all the research and reviews ive heard about the peerless they seem almost untouchable and i want something that is similar quality and performance and also price range. Suggestions would be greatly appreciated because Madisound said another month on backo…

I purchased the 6 $100 special they had a while back, and I'm now ready to install 4 of the 6. I have an 880HU, and an Infinity 7541a (4ch) to run my mids & highs. I need some suggestions for tweeters (4) that will go good with what I currently have. Thx guys, Vic.

So I am struggling on choosing a tweeter that's going to fit my head units power capabilities, and if the ohm load that the tweeter is will majorly affect my vehicles audio performance. My favorite tweeter that I am looking at is 8 ohms, and RMS's at 50 watts with a 1300-20000 frequency range, but will this tweeter perform fully off my deck if its asking for 50 watts at 8 ohms? another tweeter RMS's at 15 ohms, but has a 4 ohm impedance with a 3500-25000 frequency range....would i be better off with this because it more matches the RMS wattage of my head unit? lastly, I found another tweeter that surpasses all others in that it is 4 ohms, but requires 100 watts RMS....wou…

so im shopping around for some tweeters to be ran by my SAX-100.4 and i came across these... http://www.parts-express.com/pe/showdetl.cfm?Partnumber=272-110 i dont know much about different tweeters, but would these work for my front end? if so, would i need to take the cap. off that is already soldered on it, and just use the amp Xovers? ill be running them with these or if you know of any other cheap"er" tweaters that are a good choice feel free to chime in

I am looking to piece together a component system which will consist of Mach 5 MLI-65 mid-ranges or AA polys between those 2 for mid bass. For tweets I am looking at Seas H1396 or Vifa D26nco5? I will probably go passive then active when I get my Sundown 100.4.... So whats the better tweeter between those two?

was playing around with my two 10" ICONS today.....

Here is a couple of my new subs for my new build! TC9 motor based custom "Chuck Norris" woofers! Good for about 2K a pop and they should MURDER the Lows! The others arrive tomorrow! Can't wait! Gonna run a few on the Opti @ .7ohm......Should be able to slam on these puppies ALL DAY!!! Here are some pics....vid will be up shortly that also has info on my wifes new build!

Up until recently Ive been thinking about going with a single 12" BL, SX, LVL4 XL, or BTL. But now after talking to Rusty, Im thinking anout going with 2 10s instead. Im still currently in the planning stage and i wanted some imput on what to do. Ill have roughly 2.5ft?^3 to work with under my back seat after I lift it 2 inches. I mainly listen to rap, and my goals are to get loud and low. ill currently do not have an amp, but ill be matching the amp to the sub/s.

which setup would hit harder and sound better all around, two rl-p 12"s or one rl-p 15"? also what would be a good amp to power the sub(s)? thanks!

Wassup everyone??? Im in the process of getting two 12" SA-12's... I want to port them.... but dont want to take up the entire trunk in my car (Looking @ a 2011 Dodge Charger). Per the info I copied below ... it says I can go with 1-1.5 cubes per sub but I just have to tune higher. Can someone tell me what the optimal size would be 1.25 or smaller per sub and the port area and tuning frequency I listen almost exclusively to rap music... Please assist! Enclosure Suggestions: 1.75 ft^3 ported tuned to 30 Hz -- F3 of 26 Hz * Tune higher and use a smaller box for more SPL oriented setup (Use 1 - 1.5 cubes) * Enclosure can be as big as 2.25 ft^3 with lower power levels 1.00 ft…

Two 15 fi Qs w/ BP would they be able to handle a Sundown saz3000?