Subwoofers / Speakers

At first I was thinking of getting 2 sets of Alpine SRP-13S but i decided i didn't want to cut holes more holes in my doors, so now i only want one set of components and I'm looking to spend around $350 max? I looked at Focals but they are out of my price range. So any other good sets? I'm looking for Very good sound quality but speakers that will still get loud so I can hear the over my 2 1250watt Subs, Any suggestions?

I am looking into getting a new set of components and was wondering what all of you guys like. I am currently trying to decide between edi 6500's, jl XR's and diamond hex s600s, but Im up for any other suggestions. I have a budget of about 450 for speakers and an amp to power them. BTW, I prefer more of the smooth sound of a soft dome tweeter, but when i heard the aluminum dome jl I actually didnt mind it all. Thanks in advance. Eric

Just hooked my amp up to mids and highs and the white rca end into my amp is only coming out with sound very quiet and static as hell?if i got new rcas they dont come with the ground wire that came with the ones i got wiith my kit. What do you guys suggest i do? Thanks.

I was at a friends house the other day and noticed he had a pair of speakers laying around he wasnt using.. I asked him why and he said "idk how to hook them up.." So I took a look at them and saw they were kind of old, but also noticed that they were Polk Audio speakers.. I know polk of being a good brand, and they looked like some decent speakers to have around so I told him I'd give him 25$ for the pair and we made the deal. I got home to do some research on them and can't find any that match up to these... the closest thing I can find are the "Polk Monitor 4's".. They look a lot alike except the tweeter style is slightly different and the port location on mine is off …

As I got my mag from when the new batch just came out and my sub is logoless (No it was not stolen, Nick already knows I have it) what do the new mags with a logo look like? I went to the sticker shop and got a logo made for mine saying SI MAG but I want to see the official thing?

I am going to buy 2 Power Acoustik MOFO-12 1200WRMS subs. Here are the specs: 3" BASV/Kapton hybrid 18A SPL: 90db Fs: 36.7 Hz VAS: .73 cu.ft. Qms: 5.34 Qes: .36 Qts: .3363 xmax: .7" I'm looking at a Sonic sub box 2BA12 3.0 cu.ft. 2-4"ports in each enclosure ( I assume 1.5cu.ft per enclosure) Does this sound like a good box for these subs? How do I use these specs to tune the amp ( Hifonics 950W@1ohm, sub dual 1ohm coils will be wired in series then paralleled)? Would a sealed box be better? If so, how many cu.ft.?

About the Pioneer Premier REV series speakers? I had four coax 6x9"s on 75 rms each, and loved them. I am thinking about getting more. plus the 6 1/2" components to run active. They are cheap to at only $100ish Thoughts?

http://www.crutchfield.com/App/Product/Ite...P680&tp=105 i was thinking of getting something like this...maybe not this particular model. i know bostom makes a speaker like it.

Some say 140db+ but I would say 150db+. Also I want to know if 2 Q15s on a Sundown 1500 in a 8cuft ported box at 32hz hit 150?

thinkn about buying one, what have you guys heard about them? Or does anyone own one yet?

hey guys! just checking if you had any information about the Audioque HDC3 sub? I've seen some things on the internet about them being comparable to the BL but judging by the specs, they appear to be a bit more SPL oriented then the BL's let me know if you've heard anything good or bad! or which one you'd pick between HDC3 or BL

I'm going to have a gp3000 maybe 2 down the road. the subs are going to be used for everyday use, demo at car shows, and bass race. so far I'm thinking one ia dp21 6 gp 10's 6 audioque 2.5 10's 4 audioque hd3 10's or 6 ia li 10's I can do about 9-10 cubes net and its going to be tuned to 35. the subs are going in a half wall in the back seat of a sunfire. the amps will be placed infrount of the subs. thanks, Marks phone

oK I WENT TO THIS LIL audio shop today and dude had 2 18in rockfords the rfp-1818, the older ones, and he was sellin them for 150 a piece, the cones where a lil ripped but he said they played fine and i could bring them back if they didnt. I cant find the description of them on the net. Does anyone know how many watts they are he said 600rms but i doubt it. Plus they are 8ohm subs.. Do u guys think this is a good deal? If so i'll go get em

So im deciding on doing 3 10's here soon most likely the sa-10's. I was searching sonicelectronis just for laughs and came across these!! http://www.sonicelectronix.com/item_27313_RE-Audio-SEX10D2.html So what do you guys think would have more output the sa-10s or these re seX 10's?? They look pretty beefy but looks arnt never anything lol.

What would you rather do? 6 cheapish 12's in a sealed box or 1 awesome 18 in a decently big ported box? Both would be on the same power (2500 rms) But 6 12's has alot more cone area but a sealed box. 18 has less cone area but a ported box 18 would be a bit cheaper and better quality. But 6 12's have more cone area lol. So what do you guys think? If you have any other suggestions, I have up to 8 cubic feet before displacements. Have 2500 rms. Thinking bout running the Zcon or something similar for the 18. The 12's would be infinitys

Just looking for opinion's here.. currently have a BTL 18" (gen 2) and im in the market for a 2nd. I have located one which has never seen power.. brand new basically. Guy wants $400 and since Fi isnt selling the gen 2 anymore and the neo's wont work with the gen 2's this might be a good choice.. this is where i got thrown in a loop.. ran across this ad on craigslist. http://stockton.craigslist.org/ele/2011526092.html some DC audio lvl4 18's.. 2 of em for the price that this guy wants to sell me 1 btl for.. i know nothing about DC audio. i know its a quality product. Im looking at both as a good deal.. buying the btl will give me 2 total which is what im trying to run.. o…

Anything at all?

A mid made by CIARE (Italian company) for Car Audio. They have a bunch of products home and car... even horns like ID but I don't know what they are worth. http://oaudio.de/media/products/0861656001182438423.pdf I was thinking of pairing those with my ID CD1v.3 horns for a 2way front stage. The new version has pretty much the same specs except for the Fs = 75hz // Re = 3ohm // Qts = 0.16 // Qes = 0.16 // Qms = 4.88 // Mms = 13.19. Your opinion appreciated, Kelvin

kicker comp boxes? im thinking about buying the 10"

found this on craigslist. focal 165 v30 30th anniversary 6.5 components in box note even broke in jl audio c2 650 coaxils pdx f4 alpine amp the focals are gone. but was thinking i would buy them somewhere else. do you think about this this? he wants 320 for amp and speakers. whats a good price? will this be loud enough and clear enough over 2 12 icons? in a tahoe

What is all of your opinions on Alpine type Rs? In my town it is the craze

So, I was going to upgrade my system soon. And I am going to get two 15" subs. So here are some of the ones I was looking at that were in my immediate price range. Cerwin Vega VMAX 15.4 Fi SSD15 Rockford Fosgate P3D415 Alpine SWR-1522D So out of those, which set would you all recommend the most? If you know of any other ones please feel free to inform me about them. Thanks ~MadroX

Just wondering...

Hello I'm new here and have been into car audio for a little while. My question may seem dumb and maybe its because I haven't heard enough setups or any bad subs...but I'm wondering how it is you determine what a good sounding sub and install sounds like? Just a little background...I bought an Icon recently and built the box using the design on SSA's website and I think I did a great job for only my second box. The only two real problems were that I accidentally made the cutout for the sub 2 inches to the left in the center and it was supposed to be offset, and the second is that the port is somewhat crooked at the corner and is off by about an 1/8th of an inch. I think i…