Subwoofers / Speakers

Hi Guys, My dust is coming off what is the best glue to use to put it back on. The dust cap is made of kevlar.

Hi Guys I live in Houston and I'm considering buying some magnums but I would love to hear them first. If there is anyone in the Houston area that would like to meet up with me to let me hear their Magnum(s) I would really appreciate. I just joined this board but I've been posting on caf, sin and the 12volt.com for a while. feel free to shoot me an email and I will be glad to give you my phone number. I would really like to hear one or two of the subs so I could make a decision on what to put in my car next.

Anybody know of any shops in Fort Wayne, or surrounding cities that does subwoofer repairs? I can't seem to find one.

I have a 1994 chevy suburban that i am gonna take out the third row seat looking at doing 4 of the killer 18" subs but i did my box work and came up with @ 14 cubes for 2 18" tuned to like 25hz the curve looks killer but i dont know how to add in the cabin gain... so i need help thanks guys i am trying to get this done for USACI FINALS since they are having them in my town this year

A friend has some subs that suffered a poor recone job by their previous owner. There are gaps (air leaks) around the surround that I want to seal. It looks easy enough to do from the back, just peeling back the surround and dropping a bead of glue in. The question is what kind of glue do I use, and possibly more important, where can I find it? The only glues I actually have already are CA-based "super glue", various "goop" products, and 2-part epoxy glues. I want to buy the right glue for the job however if there's something better I can use. I also need to glue the dustcover, which is peeling off.

I have issues with eD subs, here's the link>>>>> http://pierceaudioproducts.com/forum/index.php/topic,897.0.html

has anybody owned these subs? I just bought a 15" and put in a prefab ported box, gets loud but not low enough.. Is 35hz a good tune?

Looking for a new sub and wondering if my amp is too much power (birthed at 1420 watts)

Hey guys, new to the forum here and i've taken an interest in Mach5 audio. Unfortunately I went to the website to browse around today and it seems like the website is down. I was just wondering if this is only happening to me or is the website really down (Mark did state on the site that he'll be on vacation, maybe that's why )

So I have read around a little and I have talked about it before, I need a mid-bass/woofer that can do 50hz-100hz/120hz just as loud and viscous as my 15" xcon can hit 30-50hz. I have run across the Aurasound NS10-513-4A 10" which seams like it may work, but I want more opinions. It can be of any wattage, it needs to be 10" or smaller I'd prefer a 8" but i'll do 10" if it is what it will take to hit those db's, and the enclosure whether it is ported or sealed needs to be less than 1 cu ft. I want great punch, I want to feel the drums in my chest, my old sub (kove armageddon) could hit these notes at around 135db and i miss the feeling of it.

Is there any easy way to get rid of small dips and valleys in the surface of a fiberglass box besides just gettin' at it with a sander? I just about have the whole thing covered with Bondo body filler and am working it over with my Mouse sander. I notice there are some small dips or valleys here and there (actually all over). If I try to get each individually, it will take a lot of time and I am concerned with the body filler hardening before I am done. Should I just mix each batch in very minute quantities? Is there an easier way that I am not noticing? Anyhow, back to the sander it is. 90 degrees outside and I am in a garage with no fan. Damn addiction.

I am more of an SQ guy, but now I have my D2's I am curious. My set-up is all about SQ, I don't really have the amps to spit out SPL figures, but to those that have or know of, what sort of SPL are we talking about with a set of either 12's or 15's,, I mean has anybody burnt a set yet while spanking them.. and how hard were they been spanked.. I love mine too much to chance it but it would be nice to know what has been done so far.. TIA

I have a soundqubed hdc3 18 and I cannot find the serial number on it. I have looked all over the sub and also tried to search online for where it is, Does anybody know where it is located?

hey im looking for a awesome SQ tweeter for my diy setup. 300 or so buck a pair. any sugjestions? all i found so far is morel supreme . can anyone tell me the diference between the 110 and 130 version of those?

Does anybody know if the 302's crossover can stand up to being mounted in the door? They will not be exposed to water or whatnot, but will they survive the opening and closing of the door on a daily basis? Just kinda had a thought about how to install them.

Do I need two terminal cups for a DVC sub? Thanks Well, I might as well ask my other questions while I'm thinking about them. If I'm wiring a DVC in parallel, how do I connect the two terminals? Can I just twist the two wires together and run that end into one terminal, then the other end into the second terminal? And on that same subject, is it good/bad/ugly/no different to twist both ends of the speaker cable wires together, to make a bigger wire for each terminal? Hope that made sense.

hey guys i got a recone kit from peirce audio products i am making my cascade omega 15 into an 18 they didnt send me a gasket that goes around the basket where can i find one?

Hello everyone! I just bought an RE SX 18" sub from a friend. Unfortunately it has a blown voice coil. Is it possible to acquire a recone kit for this sub? How much would it be shipped? Thank you ahead of time!

a friend of mine from work told me he came across a really nice pair of 10 inch kicker solobaric sub's the model they made when they first came out and he was wondering if these subs are good for sq ?

Need 1 Fi Q 10

Hey i have my amp wired to my sub, but how do i wire my sub to the box. there is an outlet that is capable of wireing it in, but i dont know how. also what should i use to attach my sub to the box.http://i73.photobucket.com/albums/i217/lig...22/DSC00582.jpg http://i73.photobucket.com/albums/i217/lig...22/DSC00581.jpg thanks

Mark, I am looking to build a 2 way bookshelf for personal use and just for the hell of it. I want to use SB Acoustics SB29 Ring Dome Tweeter and was wondering how well you think the MLI would mate up with it. Anyway, any thoughts you have are appreciated.

I have an Atomic APX 818 motor (3" coil/ newer motor with a bumped backplate). Needs a recone, anyone ever reconed one with different parts than atomic? I'm looking to build either a 15" or 18" that would do well on 1200wrms daily on music. (amp is an AQ1200D) If any dealers read this or anyone who can build me a recone feel free to send me a PM with a quote for both a 15 and 18. Looking for a loud daily sub. Dual 1.4 or similar coils preferably. Thanks!

I just built this box for 2 first gen dcon 12's but cant figure out the cuft3. Need help. Thanks for any and all replys

I am about to install 2 18's in the back of a Gmc Sierra Ext. Cab. I will be taking the back seat out. My question is should I have the subs and port facing up or Subs facing forward and port up. I was told to have the subs facing forward and port up but I would like more opinions on this. Thanks,