Subwoofers / Speakers

I currently have a Polk Audio SR 124 SVC 12" subwoofer. It is not particularly loud but sounds great. I am more concerned about SQ. I plan to redesign my trunk and would like to go with 2 or 3 10's. I plan on a false floor construction in my 2003 Mustang Cobra trunk. The subs will be facing up in the middle of the trunk and powered by a Zapco DC reference 1100.1 amp with about 850W @ 4ohms. Source unit is a Pioneer AVIC N3 navigation system. I currently have a Polk Audio SR6500 component set in the doors powered by a Zapco DC Reference 1000.4 amp. My picklist is below: 2- Soundsplinter RL-i10's : pros: great price & reputation cons: not sure 2- Audiopulse Epic …

How does the Fi BL compare with the IA Death Penalty and Death Row in output, sound quality, and overall?

Well, I was able to get a little more framework on the Z done today. Here's some pics. The PLs in the door. And I bet you think this is just an ashtray...... Well, lift it up and the little microswitch opens and POOF, no more subbass. Flip it down again, and the MAGNUM will breathe fire! Also had to work on an enclosure for some, BAH, JLs. A trio of 10W6s in 3 cubes @32Hz. Doesn't sound too shabby.

Alright so i'm going to buy an 18" fi bl before summer, but i want the plans for the setup before i buy. My box is 31"H 35"W and only 17"H, and will have a 3" port going along the 31"H, tuned to ~30hz. The sub will be on the same side of the box as the port, is that a problem? The only thing i could think of is that, im taking up 2 seats in my quad cab dodge ram for this, and because of the seat it will be set at an angle. Will the sub perform right, and what should i do, if anything, to my box since it will have the strain of an 18" sub on it. The only way i could get around this would be if i put it in the bottom corner opposite the port.. how does where i put the sub o…

Lots of info in this post, but I will bold the important bits and questions I have. Feel free to read it all but my main questions stem from box design perspectives. I can create another thread about electrical if needed so try to limit the discourse to enclosure related topics, cheers!! After much trial and error the only reasonable design choice left is to go for a slot port. I have tried and tried to fit an aero port however I have come across two problems. 1. I have to make my box far too large for my power >5 cubes net or 2. my port becomes feasibly too long to fit inside my box or outside (>28") along with airspeed issues with an 8 inch port (50 i…

I'm looking for something that sounds good but doesn't break the bank. They will be getting 50-60 watts per side. Zapco i-6.2 http://www.woofersetc.com/p4965/i62--Zapco-65"-IForce-Component-Speakers.htm Image Dynamics CTX65CS http://www.woofersetc.com/p6201/CTX65CS--Image-Dynamics-65"-Component-Speaker-System.htm Or if you can recommend something else better in that price range. Thanks

I was wondering if anyone had experience with the JL Audio Stealth Box or similar products. I am considering a stealth install in my 07 Tahoe, with this as the possible cornerstone of low frequencies. I am also considering Diamond d661s component with the silk vs the aluminum tweeter. I plan on using these in the factory locations 6.5 mids in the doors and tweeters in the A panels ie the factory locations. I was also considering USD 6.5 mid bass in the rear doors also in the factory location about 6 inches behind the front buckets. Amps (amp) are/is up in the air. I was considering a 4 or 5 channel of unknown origin to achieve the solution. Musical tastes run the ga…

I blew one of my mids (Cadence CWM-6). I'm pretty strapped with cash, so I'm either looking at getting a set of the PG RSd comps or getting a pair of MLI-65's and run those with the current Cadence crossover and tweeter. Not sure how that butchered combo will work though, the Cadence rep I contacted wasn't willing to share crossover specs so I have no idea what they are. Also, the Cadence tweeters are very bright for silk domes and I heard the MLI-65's have great midbass but their upper midrange performance isn't very pronounced, so they may not do too well with a bright tweeter. Any opinions?

Hi, im having trouble deciding what to tune my box to. the box is going to be about 3.1 cubic feet after the displacement of the subs, i was wondering how many 4 inch aero ports i would need, and what to tune the box to. if i can get some peoples input it would be greatly appreciated.

hey all, i just finished my box.... i was just wondering if it was better to place my sub(on the baffle) close or far away from the port opening or center it on the port opening OR not care about the location all together.btw it`s a 3.5 cubic foot box with the port fireing on the same side as the sub.

misposting sorry look at other post thank you

Hello all. New sub is being built as we speak (went full carbon fiber cone and dustcap also). Dc suggests 5.5 cubes but im wondering if anyone else has had some experience with these things to give me the right direction to head. The current box is about 7.5 cubes net so a new box is in order. Will also be going up in power soon. Sub will be on a synergy 35.1 at .5 until i can get a bigger amp. It will be daily but also the occasional competition.

I’m looking to build a ported enclosure for (6) Ampere Audio AA-2.5 6.5” D2 subs. They will be run on a 5k/1 ohm stable amp wired at a 1.33 ohm load. There will be plenty of power as they are 500 rms and 800 max. I can’t seem to get anything from Ampere Audio on the port size I need. With sub displacement my box needs to be 2.48 CF (+) port displacement. Does anyone have suggestions or know how to calculate the port size? Square inch and length is what’s needed. Hopefully someone can help on this

so i have specs of the driver and i was wondering if i got enough specs togeather if a recone from any company would be possible. ok so it says... cd10aw is the mod number 200 oz mag is what it says, but im not sure if its the actual mag weight or the motor structure in general. they weigh about 27 lbs. each. Dual 4 ohm.... but recone impedence is not important 27mm x max with a 3 inch voice coil if they actually are blown and its not my friends hearing i will get some more pics up and measurements but i really loved these subs and the mag is a decent size so scot or nick or anyone who does or has the parts to possible recone these drives please let me know. Thanks in adv…

I want to get one of these matching passives for my tc10. Do they really live up to their hype? If any of you guys by chance happen to have have one and are interested in selling, I would love to take it off your hands!

Before i start, go ahead and go to youtube and search for HDC3, there are already some videos of them in action. I thought since nobody had any info on them that i would share what i have been told from the guy himself. If you thought the old HD3s were loud, ...haha get ready. There has been reviews about people doing direct swaps from HD3s to HDC3s and gaining, not loosing, gaining Dbs (not noticeable by ear, but by meter). So, what to expect out of these? The Fs rating on these subs are high, why? The Parameters for these subs were taken fresh. Have not been "broken in" yet. The suspension is still stiff as hell. When an HDC3 is broken in, the Fs drops approximately …

Just getting back from a deployment and there are alot of new stuff out there so... I'm looking into getting a pair of 10s. I was looking at the IDQ and IDMAX but since I got to this forum I'm seeing sundown and ssa as well as some other's. I already had a box built to hold the IDQs but right now I'm running two american bass dx 10s which by the way for 35 a piece I'm rather impressed with them to say the least. What would you guys suggest. Right now I have a choice of running between 900-1700 rms and the box I have I think has 1.5 cuft per chamber...

http://www.powerbassusa.com/products/xtrem...erencecomp.html

what would the suggestion be for 2 type r 12's on a sundown sae-1000d for LSQ? i have them in a 4.5 cube box tuned to 32hz and i dont like it at all. my box is subs and port up in a 05 impreza wagon. any ideas would be great.

I found a pair of the red stamped steel basket MTX road thunder twelves next to a dumpster outside my apartment the other day; while not being as loud, they sound considerably nicer than my lanzars; they seem to be an ancient model, but I was wondering if anyone could point me in the direction of finding a few more for a low power install for my coworker? http://www.parts-express.com/pe/showdetl.cfm?partnumber=293-352

My question is pretty straight forward I'm currently upgrading from 2 type r 12s I am just wondering what i should go with 2 ssd 18s or 1 btl 18 any suggestions? I have enough space for either, and will buy enough power for either thanks i'm not sure why i wouldn't go with the btl I just think 2 18's in my s10 would be gnarly

I have noticed some noise coming from one of the ssd's and took it out of the enclosure. turns out the tinsel leads have burned down some of the padding.I'd like to replace them to get rid of that terrible noise. so how do i go about taking the pads off? And i was thinking of grabbing some felt pads and 3m spray adhesive to repair. would that do me? Thanks.

anyone have a link to the ts specs and parameters for this driver? i cant seem to find a link to them or a email addy to get in contact with clarion. im not really interested in a phone number. any help would be very much appreciated as i want to model these drivers in winisd.

can someone tell me if these are good speakers or should i just get kappas http://www.crutchfield.com/S-sf0Ec7fSJ33/c...a=1&cc=01&avf=Y

anyone have any experience with memphis subs? 2-12's in sealed box. all according to spec. which would be better. hpo and d2 shp and d2 The shp is kinda expensive, so wondering if a d2 would be better? hpo is pretty cheap but does d2 blow it away? thanks.