Subwoofers / Speakers

So I have purchased Gcon from tirefyr while I am awaiting to get all my parts together for my other build. My question about my Gcon. It will be sealed at 1.5 cuft after displacement. I was planning to put the sub in the center of the 30 in wide enclosure. Would there be any benefit to offsetting the sub one way or the other? or am I just over thinking this.

Today i blew my sundown sa 15. I though about reconing it. But idk yet. Does anybody have any experiences with the american bass xfl 15s? Or fi audio bl 15s? Thought about getting either of those. But i think ill just buy a recone, cause i love my sundown. But today i also ordered the knukonceptz 0 guage power and ground wire. I got the 100 amp fuze. Good choice?

i currently have a pair of polk db 6.5 components. the 6.5s dont go low enough, they are running on a power bass XAX2160FD 100rmsx2 @ 4ohms. i have been thinking about using the tweeters and the xover and installing a pair of peerless 830946 woofers. im not sure where the xover is actually set. but would this work? or what would you guys reccomend? i have a 15" ssd on 1300rms in the back on my tundra access cab. these would go in the doors btw.

Kevin just posted it on the Skar Facebook "Who would be interested in a 4" Coil, 12/15/18" SPL Monster woofer? 2500 Watt RMS Power Rating (Conservative). A little side project prototype I am currently working on - if there is enough demand I will probably put them into production, I personally love the idea of making them - 6 Layer Spider - High Roll Competition Grad Foam Surround - Ultra Strong Paper Cone - 20mm Top and Back Plate - 4 PC Ferrite Magnet Motor Assembly (220mm) - Qts 0.52" I cant get over how Familiar this looks to a new sub woofer coming out from another company...

I have a sundown sa 15.Its in a custom box at 33hz, powered by a hifonics brutus 1200. I have cheap 1200 watt amp kit from walmart right now but here very soon im upgrading to knukonceptz kca 1/0 amp kit. First question is : will i tell a difference in loudness or quality from this better wire? 2nd question is : how should tune my amp for my sub. Right now i have everything set to half way. My level is set to where im pushing around 900-1000 rms. help me out guys! I will greatly appreciate any tips

I have a 2003 dodge ram im looking to put a setup in under the back seat. I will be building a fiberglass sealed box conformed to the underseat area shape. It will net me a minimum of 1.75ft3. Im just looking for hard hitting bass, no top of the line setup. Budget for the subs is around $300+-, i would imagine 2 10's would probably be my best route? I just went around to all the shops here in town for different opinions. I know Kicker is normally frowned upon, but a few places suggested the new Comp R 10's and a cx1200.1. I cant seem to find much info on the new subs, i was told these new subs are from a better sound engineer kicker hired recently but it could be BS for a…

http://www.emfcaraudio.com/emf-audio-ermagerd-18-dual1/ Looks like a sundown based company, anyone ever heard these? Another thing it has 50mm xmax, almost like re xxx series, so i'm guessing the response would not be as great compared to smd/evil series? I'm just a curious george about speakers! I searched around here I'm suprised nothing showed up about them.

Hey guys, I heard a set of Death Row 12s today and I am THOROUGHLY impressed. Ton of clean, hard bass without losing much musicality so to speak. I was just wondering if anyone has experience with both the DR's and the DP's and if you could answer a question. I've heard from a few people that the DP's are burp princesses and don't sound very good on music. Is this the case? Or do they perform similar to the DR's? Are they burp princesses? The DR's to me sounded like a lower power xcon (don't get mad or nothing, just opinion). Looking to run a pair in my cadillac and a single in my wife's 2010 Speed 3. Opinions?

I'm about to start a wall build in my 2000 plymouth neon with 2-18" zcons. They will have about 14cu net for the pair and I plan to tune low 30s. My question is how much port do these guys like? Normally I would use 14-16sq per cu but I've never used ssa before so I thought I'd ask and see if anyone knows what these subs like. Thanks for any help.

After only a year of use on a Crescendo 1000c4 my SSA DCON 12 inch died. =( Repair dude is trying to charge me 100 for repair/recone and 35 for labor. Nearly the price of a brand new DCON. What do I do.

I sold my sa15s for $600 so it's time for something new. I need about 100 or the box so I have 500sih to spend on subs. I'm running an saz2500d what would you guys recommend as in upgrade from the sa 15s? or should I just rebuy the sa15s and profit a bit?

I have an issue with my amp protecting at a high output. The subs are wired to ohms in an 8 cube enclosure tuned at 38. When I take it into high volumes it gets louder without distortion. When it starts getting to its peak my amp throws a short circuit protect. Is it possible that one of the coils have an issue? Or possibly amp? The setup is four fi ssds on a stetsom 7kd. Also coils read exact same on each eight coils.

I just order a pair of Fi ssd 18s and was wondering how big I should go on the box? i've read a few forums where people have said go on the smaller side for less peakyness or go on the bigger side and they bang hard. What do you guys think?

Is there a name for this thing? Also has anyone found it at a local hardware store. it doesn't appear that home depot or lowes carry them. trying to avoid ordering it online but not sure i have a choice. thanks.

I am trying reach the highest decibels I can with what I have, a 2006 V8 Lincoln LS. I have done the big3 and am ordering an extra battery with isolator to replace my 2fd cap. I have 1-15" ssa icon D2 in 4^ft @32hz sub firing up and port into cabin, Hifonics gladiator 1000.1 @ 1ohm, hifonics zues 80.4, Sony GDX-GT660UP headunit. two pairs of cadence cw6kits comp in the rear, one pair of American bass 6.5 mids and a pair of silk tweeters in the front and on front sails. The only issue i'm struggling with is the bass. I know I can get more out of the sub but cant figure it out. I want to rebuild the trunk and new enclosure but trying to determine best way to do that. a…

I have Hertz ESK-165.5 components sets in my car. I have my tweeters on -2 on the crossovers, but when there are "S's" and sometimes "F's" they seem very harsh. Everything else sounds fantastic though. Do you know the frequencies so I can turn them down a little? Or is there another way to fix this? Thanks.

I am purchasing 2 zcon 12. Are the box specs givin for these net or gross volume?

Alright guys, I finally got my build up and running (its in the build log section if you need to see it) and I am asking myself if I need more power. Currently I am running an AB1100.1, and during testing had it wired up but scored a 150.2. After wiring it down for peak power from the amp it scored a 154.2. Te reason I ask this is because these subs seem to be laughing at that amp.. I mean I know they are underrated at 2250 RMS but they literally only move 3/4 of an inch at most (20-30hz) and get stupid loud in that box. I am looking to add more batteries, maybe another alt, and maybe gonna add another AB1100.1. I am just worried that the 3" coil wont be able to han…

Whats up fellas, I wanted to get some input on what you guys think. I have 4 Sundown audio SD-10's that will be pushed bey a Planet audio BB2400.1. After doing some measurements I dont think I can get optimal box volume for all 4 in a ported box so I was thinking of dropping it to 3 of them in a ported enclosure, that would raise the impedence a bit so I figure about 1500 watts. Or I can run all 4 of them in a sealed box and give them about 2K watts. I am more concerned with the lower frequencys which is why I am thinking of giving up cone area and wattage to be able to tune lower. Do you guys think with the extra cone area and wattage that I could get as much low frequen…

Hello everyone, I was using the search button, but I didn't come up with a solid answer. I'm hoping someone here can help me out. I'm looking for the recommend box size for 1 orphan sealed. I've read from other post that said the orphan are about the same as the SA-8 and likes the sealed box size of .17^3ft. I've also read a post from mike, that It needed .2 to .5^3ft, but I'm not sure if it was the recommended for seal or port. I actually wanted to try out they type of boxes and see which one sounds better to me. I do want to to try to make a passive radiator box, which I believe these subs were intended for. Here is the info from another post on this forum. T/S Parame…

I recently got my first comp set. They where used. I hooked them up to my head unit. They are working just not much came out of the mid bass speaker. Is this do to lack of power from the head unit? I have an amp to power th just do not have all my cables to connect it. I was excited and wanted to here them. Should I expect better results once connected to my amp?

So I finally am buying some decent subs and I bought two level 2 15s I have a 05 scion Xb with the back seat in it still I have modeled up boxes on Winisd it's my daily driver but I also go to spl comps so I want it to play loud and low. Open to anything just lookin for help I was thinking 4th order but I am confused about cubic feet dc says 3 per on there site I have a mb quart 2000.1 and dual 2 ohm subs thanks a lot for the input

I bought 3 10" Fi subs but never could find what model mines were and im just curious to know. All i know is that they are Fi subwoofers.

Hello, I am going to be putting a 12" XCON in a ported box into my Passat. I was looking at the Crescendo 2000D to power it at 1ohm. Since I'm on stock electronics I was thinking I will just keep it at about half gain maybe slightly higher and see how everything does. I do plan to do some upgrades or possibly add a second battery. My trunk comes designed to house a battery so "I THINK" it would be an easy addtion. Do the Gain's work like that? If the AMP is rated at 2250RMS and the gain is set at halfway does that mean I will rougly be putting 1125RMS to the sub? Any Enclosure recomendations? Right now i'm planning to just use the SSA optimal enclosure design,…

Hi, I posted here awhile back having trouble getting any output from two dcon 12 d4s in a sealed box. I tried them out in a ported box I had for my ED subs and there was a definite increase in output. But there are a couple of things I need your opinions on. The box is not spec for the dcons. Basically it's a 2.8 cu ft shared sub chamber with a 3x13x40 slot port which should give it a tuning around 28Hz. So it's undersized by about .7 cu ft from spec. Now the main issue. I have been running these at 4ohms off of a PPI A600 and while it sounds good, the amp runs VERY hot. Granted it always has, as has any of the Art series I've run at 2ohms stereo or 4ohms bridged. The oth…