Subwoofers / Speakers

The picture is very high-definition, and of course it's Bluetooth connected.

would 1500w rms for subwoofers and 500w rms for speakers be a good balance for a lot of bass but good loud music quality too

I have a small car and having a family and all that am currently trying to use smaller and smaller audio solutions to maximize space to the point where I really don't even want a subwoofer in my trunk anymore. I really don't need very much bass, just something to fill out the lower end but I want an all in one sub so that I don't have to use anymore space for an amp, etc. So I know under-seat subs are not discussed nor recommended here but I was about to pull the trigger on one and then noticed that the Pioneer TS-WX70DA is now under $200 and it's a loaded horn design. But what interested me in this particular one is the below picture showing how thin it is and that…

Hi guys, need help wiring up my pair of 12 kicker comp vr 4ohm dual voice coil subs to a Memphis 16-MC1000D amp, is one ohm possible? Amp has two pairs of speaker inputs

I have a problem with my mtx 12s everything is hooked up but when I press the gas the subs go off and i thought it was the fuse it was hooked to but i switched the fuse and it kept doing it so I took it off the fuse and left it off but I started driving home and the subs kept going off what could it be I need help

Hey, Yall I just made an account for this page and I have a very important question... Last week I switched my set up from a 1.9 cubic foot sealed box with 2 10" kicker comp ds to a 2.0 cubic foot ported box and I have an awful smell at high bass. I did take my truck and have a local audio shop tune my kicker 1200 watt amp and it still smells... The subs are in perfect condition but they are about 3 years old but the box is a week old... If you need any more info please respond on here or email me at [email protected] Have a great day!

Would love to hear what you guys think of this http://www.madisoundspeakerstore.com/auto-kits/hi-vi-d630-3-way-autosound-system/

I currently have the new alpine type x components on my 90mazda b2200 installed on some custom kick panels i made and dont like how they sound. I just purchased 4 10s Savard Rap subs that i plan on installing them in the back space of the seats. So im looking for drivers that could keep up with subs but maybe little more vocal. Im not going for SPL or SQ, something in between. I was thinking of adding 2 5” drivers per door wired down to 4ohm and 2 tweeters per door “ or maybe gonna install in A/C vents” down to 4ohm as well. The amp i have for vocals is a Twisted Sounds 150.4. I was planning on raw drivers madisound or PE, with budget of around 40-70 per driver depending …

I was just reading the thread discussing running DVC subs off one coil compared to both and there was also talk of sub woofer efficiency...That got me thinking, what is the most efficient driver available for mobile audio applications? Also why is efficiency generally so bad? Given technological progress with computers, phones, etc you would think there would be great leaps in sound and driver efficiency also? Have drivers made progress over the past 20 years?

i still have two new Sundown Audio SA-8v3 subs left over from a previous project. i would like to re-purpose them for my daily driver which is sq focused. can the SA-8 be musical ? if so, how do i accomplish this without switching them out for something different. Sundown website states sealed enclosures are not recommended. local dealer tells me that once you port the SA series, they become more spl oriented subs.

I have one JL 10w6v3 dvc 4 ohm and two JL 10w3v3 svc 4 ohm and I'm looking for a 1 ohm load if possible. Any ideas and/or things I should consider? Just FYI, the 10w6d4 is in its own H.O. enclosure and the 2 10w3v3 svc 4 ohm are in their own dual enclosure. Thanks in advance

I have two dvc 8 inch subs and one dvc 12 in a box that's ported with a zues mono block amp. Whats the best enclosure for the three? Can the 12 push the 8's out of phase? I need a suitable box design and wiring config for this setup

Hey guys, new to the forum. Curious if the Icon 15 will go back in production? I used to have an Icon 12, I had it in my shed during switching vehicles, unfortunately it ended up missing along with my whole shed during a hurricane lol I loved the sound of it. Since then Ive been running an old 2010 Fi SSD 12 I had sitting around, in a ported enclosure tuned to 32 hz. Im looking to do a little upgrade, was wondering if the 15 Icon will ever come back? Is it worth getting the Gcon 15 instead?

Anyone know when we might see a revamp of the punch line? They been on the same run for years now . Would love to see them go back to the 90's style with the spruce paper cones loved that sound and look..would be amazing to see a O.G company get back to roots of the hobby. I'm honestly sick of all these new kids with the same ol cookie cutter everything.

Need new sub, blew my 18" treo ssx. Anyone do recones for a decent price? Anyone selling an 18 that does 2500-3k? Budget is $300-400 Im open to other options as well. Im workin with about 4cu ft net ported, 5 sealed. Figured the 18 is the best way to go, but if 2x 15's sealed would fit, cool.

Hello all, I have a '17 Audi A3 and I recently had Best Buy install a Pioneer TS-WX1010A and it sounds great... However I have a huge issue with it. If I turn off the music or even put the volume to 0, the sub goes berserk. The guy at Best Buy has never seen that and of course has no idea what could be the problem... Any ideas? Thanks in advance.

Hello everybody, I currently have a hifonics ZRX1216.1D It can do 1200w x 1 ohm or 600w x 2 ohm or 400 x 4ohms. I currently have a soundqubed HDS2.1 12" 600W rms subwoofer, I don't remember off the top of my head but I think I have it set up at 1 ohm. Anyway, I'm not sure If I should spend 188$ and get 2 600w rms dual 4 HDS2.1 12"s, or go with 1 SSA Demon 12" (dual 4 ohm) and eventually end up buying a second SSA Demon down the line. I'm starting to want to get into more quality built subwoofers over just cheap stuff so I really want to go with the demon but im not sure if its really worth it. They are on sale currently though so thats very enticing. The box i'm curren…

Say we have a sub like a kicker cvr , kickers prefab package they sell is with the subs at a bare minimum on air space 1.75 cubes and tuned around 40 to 42hz . Say we take the subs put into a larger box with 2.25 cubes still with same tuning would you gain anything?

I could really use some advice here. I have a 2014 2500 Ram that I need to decide what route to take on subs and enclosure. This truck has two cavities in the floor area under the back bench seat. Fox Acoustics makes a box for it that’s molded to fit the area. It gives you 1.55 cu feet per side and it’s tuned to 35 HZ. You can do a pair of 10’s or 12’s but limited to a mounting depth of 7.25” and the magnet must be no more than 6.5” in diameter to work. They also do another box that has a center console for the rear built into this box. It let’s you use 4 10’s and the box is 4.3 cu feet and tuned to 34 HZ. Mounting depth is 7” max and the magnet diameter you can use is 7…

Hello everyone, I ma a new member and desperatley need your help. I am trying to find a low frequency speaker of 8" with an extreme high Xmax equal or higher than 60mm. It is for a technical application where its needed to move an huge amount of air. Can anyone help, please?? Thanks

Question is, can I run 3 18” ZCON on 2 ampere 5k???

Looking to build a single vented box and need some ideas. Will be going in my 16 Jetta with a sundown 1000w at 1ohm

Hello everyone! I need some advice about making a compact Subwoofer. I am planning to make portable,"on the go" subwoofer box, but I have dilemmas about the speaker size. The enclosure will be 6x6x6 inches. I can feet 5.25 inch speaker with no problem, but I have terrible feeling that the woofer will not sound good. So I need your opinion. Should i go with the 5.25 inch speaker, or I am going to need smaller speaker like 4 inches? I really appreciate your help. Thank you.

Ok. I'm starting back into audio but thought I'd start off with a decent boom/bang. Looking mostly for SQ with a little SPL. I already own a "brand spanking new" Zed Audio Kronos, pre-ordered a Stereo Integrity BM Mk V (I'm kind of limited in space). I was thinking of adding a SSA IC 150.4 and a set of 6.5 Evil Mids(I guess 8 ohm versions) and Evil 1 Tweeters. I am looking to do the following setup (all in a 2010 Hyundai Genesis Coupe): IC150.4 - Ch1 and 2 to Evil 1 Tweeters (maybe mounted to A-pillars or factory door location) IC150.4 - Ch3 and 4 bridged to BM Mk V (debating on how I want to set this up; either wheel well or leaned against the front of tru…

I was wondering if anyone had any experience with using a car audio sub in a home theater setting? I will be getting a Crown amp that is somewhere aroung 4k - 5k watts so power shouldn't be too much of an issue. I was mostly looking at building a box for a single 15" since the box for a 18" jumps up in size considerably. Any info and/or help is greatly appreciated. Thank you Eric