Subwoofers / Speakers
Discuss Subwoofers And All Aspects Of Speakers here.
6,865 topics in this forum
-
I have heard amazing things about both of these subs, which is cool. Actually, I have NEVER heard one bad thing. I am curious, how do these two subs compare. I am very much so a noob and know nothing about comparing specs really. All I really do understand is that the Q has a great XMax meaning what, more excursion which could yield more output (bass on the SPL side??)
-
0
Reputation Points
- 7 replies
- 875 views
-
-
I would hope that most of you know that I'm not one to post "this vs. that" threads.... with that being said: My CDT CL62's are a little dissapointing. I want to have a four-way ( ) in my Trailblazer: Componant set in the front doors / dedicated mid-bass in the rear doors / sub in the cargo area. I'm of the mindset to go: Subbass - taken care of (Uberwoofer 15" + 1500 watts). Midbass - 6.5", 60-150hz, sealed in 0.5-0.7ft^3. Midrange - 6.5", 120-3khz, sealed (0.5ft^3) or IB. Tweets - 3/4", 3khz plus, prolly metallic, but could do silk. I have 100x4@4ohm rms available. 200@2ohm. If you had $600 to spend on those six speakers & a pair of crossovers, what would yah do?
-
0
Reputation Points
- 37 replies
- 3.2k views
- 1 follower
-
-
hey guys! I have your typical question for sub comparions again. Im looking at comparing the DC Lab LVL 4 15" subwoofer vs. 18" BL Here are the specs: I have a maximum of 5.5ish cu. ft possible for the subs. I'd run the BL in 5.5 cu ft and the LVL 4 in around 4ish maybe tune them to around...35Hz or so. I have a JBL BP1200.1 to power them. So around...1100 to 1200 watts per sub. The BL would be Fully loaded for daily driving. what do you guys think would perform better in comparison to SPL ouputs? Im thinking the SQ will be around the same maybe? lemme know if you guys have any ideas! I know the sub comparisons are always hard because of all the variables
-
0
Reputation Points
- 1 reply
- 749 views
-
-
OK, I was looking at the RE XXX's (newer version), and the Fi BL's. I listen to mostly metal but I do like everything else too. They're going into a Tahoe, so size isn't an issue. I'd like to do 2 12's. I'm looking to get as loud as possible but not sound like total azzz. Powering them would be 2 saz-1500d's or 2 saz-2000d's depending on sub selection. I'm not stuck to those two brands, any input in any direction would be great. Price also isn't much of an issue. Willing to spend as much as $2000 for the subs.
-
0
Reputation Points
- 11 replies
- 957 views
-
-
I thought cabin gain was supposed to make a sub sound louder and play lower, yet with my doors closed and windows up, it is signifigantly quieter than with a window down or door open, especially in the low bass region. FYI, I have an audioque LW8 (awesome sub btw) in a 1 cu. ft. enclosure with 16in^2 of port tuned to 35hz behind the driver's seat of a 1998 ford ranger extended cab facing backwards. It seems like there is some sort of cancellation going on; in my HT I could help this by adjusting the phase, but i've never heard of a phase adjustment on a car amp. Anything to fix this, or am I doomed to rolling the windows down when I want to bump? I've already tried rev…
-
0
Reputation Points
- 1 reply
- 823 views
-
-
so im getting a woofer soon after x-mas...im getting a power acoustic mofo 15...and i wanted to know if someone could build one cheap and ship it to me...i want my box to look like this one
-
0
Reputation Points
- 25 replies
- 3.5k views
-
-
okay i just went to a competition and though i did good but i want to go louder. i have a mostly rockford fosgate system. this is what i have (2) sets of sony component sets (1) T400-4 for the mids and highs (1) T1500-1BDCP for the subwoofer (1) T2D415 the subwoofer is wired down to 2-ohms Pioneer priemer 3200-ub head unit stock 90 amp alt (2) batteries one is a yellow top and the other is a shuriken 80 amp battery 0 gauge wire throughout the car big 3 done on front and back battery box is a 4 c.u. ft. ported and tuned to 36hz the car is a 1996 eclipse rs hatchback i hit 141.0db in stock 2 of the idbl competition im stuck deciding between re audio and fi but open to more…
-
1
Reputation Points
- 7 replies
- 937 views
-
-
Just looking through some websites dreaming about a future midbass/fullrange setup and happened across these speakers http://www.parts-express.com/pe/showdetl.cfm?Partnumber=297-210 I was just curious if anyone has any experience/opinions on these and if they would be realistic in a SQ type setup. Chances are I won't be upgrading my system any time soon but these caught my eye and at 12 bucks, I might order some just for the heck of it. Thoughts? Alex
-
0
Reputation Points
- 2 replies
- 1.1k views
-
-
My buddy recently ordered a brand new Fi X 15 without the BP option the other day for me as a gift. I plan on putting it in my girlfriends 2 door blazer. Anybody have experience with the new 750 watt RMS models of these subs? She currently has a VVME 1500 watt amp powering 2 old powerbass M-12's. These amps have clamped around 1400 watts at 1 ohm. I know the X is the entry level from Fi, but it should be able to handle a clean 1400 watts, right? Also, Anyone know the best sub/port combo for a blazer? The current setup is subs and port back. I havent tried anything else in there. It's pretty flat down to about 40hz but below that is a steep drop off. I was thinking sub up …
-
0
Reputation Points
- 4 replies
- 903 views
-
-
I havent seen a lot about this sub on any forums, or anyone selling them. i found one local BNIB and thinking about buying it. The few people that have em love em, and they look pretty beefy. what do you guys think about the Crossfire XSv2s?
-
0
Reputation Points
- 3 replies
- 755 views
-
-
Hey guys, I was just wondering if anyone has had expierience with these tweeters. My cous wanted to get some of these or the "horns" To play around with. Anyone had expierience with the horns? I have never heard a tweeter horn. He has, that is why he wantes some to play around with in his van. I dunno though, any thought on these?
-
0
Reputation Points
- 9 replies
- 1.3k views
-
-
What's up guys I'm trying to look for some good looking 10's don't want to spend a whole lot but they have to be somewhat decent. Something along the lines of arc audios foose edition subwoofers in terms of looks. Gold, white, silver, gun metal are the colors I've been looking for. Help a brother out thanks!
-
1
Reputation Points
- 38 replies
- 4k views
- 1 follower
-
-
Dont wanna email Nick, and Im sure some other people are wondering as well. Any good news on the subs? Anything to keep us goin on Hows production coming?
-
0
Reputation Points
- 1 reply
- 725 views
-
-
guys i have absolutely no scales at my hplace but need to get an accurate number as to how much a single 12" D2 weighs unpackaged, just as it is...any ideas?????????????????????????
-
0
Reputation Points
- 2 replies
- 1.1k views
-
-
i would take the measurements myself... but i dont' have one yet i'm planning on getting a 97-99 thinking bout getting 15s but want to make sure they'll fit plz help
-
0
Reputation Points
- 12 replies
- 1.1k views
-
-
Would love to hear what you guys think of this http://www.madisoundspeakerstore.com/auto-kits/hi-vi-d630-3-way-autosound-system/
-
2
Reputation Points
- 15 replies
- 4.5k views
- 1 follower
-
-
I am wanting to get some scoops from people that have heard or experienced these first hand.... none of that well on youtube BS I am curious as to what your ears heard about these
-
1
Reputation Points
- 7 replies
- 1.2k views
- 1 follower
-
-
look for a big boy 18 basicly that will handle 1500 to 3000
-
2
Reputation Points
- 11 replies
- 1.4k views
-
-
Just wondering if anyone had tried these yet? The specs seem to fit well into my plans, I've got about 450rms to play with at 4 ohms in a new project.
-
0
Reputation Points
- 6 replies
- 2.4k views
-
-
Would there be any significant difference if i swapped out 2 xcons with the SMD 15" subwoofers on the same 3500rms power in the same enclosure just curious
-
2
Reputation Points
- 28 replies
- 4.1k views
-
-
because I'm a noob to active setups. So I'm trying to plan out an active two way setup for my Tahoe. My question is can I use any speakers I want? I'm used to buying what is packaged and put together for me and now I'm swimming in possible options. I see all the Morels ,but none are the ones for the car setups, then there are seas and ScanSpeak and peerless.........Do they need to be made for car audio and what are things I need to look for in the graphs and such. I have no way to demo all these options!
-
0
Reputation Points
- 1 reply
- 692 views
-
-
Ok, so I have power limitations. So could I be able to get good sound from any subs in this site with that power or I just wasting my time and money? I'm better buying Kicker, MTX, Cerwin Vega or something like that?
-
0
Reputation Points
- 14 replies
- 1.2k views
-
-
im looking for some good 6.5 mids for my 2005 durango. my factory radio is amplified. i will be adding an aftermarket amp for my aftermarket HU for mids. ( i tend to take out all my aftermarket stuff alot(crooks) ) i have a pioneer 6000 deck "new style", 18'' loaded btl; amp got stolen but getting a sundown 3000, but im going to switch between that and my kicker L7 of a us amps 1600.4 bridged at 4 ohms to put 1100 rms to the L7. so there will be plenty of bass. i have tried the alpine type R mids and they did not work for me. i was thinking focal. but ide like to get a few idea's from you guys. and what amp would you recomend on them. thanks. Eddie Gossett
-
0
Reputation Points
- 5 replies
- 1k views
-
-
It's been a while since I've heard anything. How's production, projected dates, delays? Thanks
-
0
Reputation Points
- 7 replies
- 1.3k views
-
-
Who's Online (See full list)
- There are no registered users currently online