Subwoofers / Speakers

Alright, i am looking to build up a daily gp build. I was almost dead on a pair of 15's Sundown SA's to be specfic. I guess i am looking to spend around 550ish to 600ish on subwoofers. I am pretty sure i have roughly 14 cubes to work with in my jeep i'll have to double check in the morning but im pretty sure its around that range. I have a sundown saz 3000d to throw at whatever combo i end up going with. My goal is to be as close as 148-149ish on music dbs would be nice but i know a lot of factors play into that. Also i don't want to build a wall unless the gains were huge. I listen to mostly rock, heavy metal, as well as rap. Going in a 2001 grand cherokee limited, if …

currently im running: alpine 9887 HU 2 6 1/2" RF power series (2-way) off of T800.4 1 18" FI Q (2010 model) fully loaded (w/o high QTS) off of AQ1200 Box is 7.3 ft^3 tuned to 28hz Big 3 1/0 guage 1 extra Shuriken battery in the back in a 2002 S-10 Blazer im looking at upgrading my front stage to some "nice" horns and want some input on the Fountek NeoPro5i Professional Ribbon Tweeters. has anyone run these or something very similar? im willing and able to do some modifications to the doors if needed for some mids (looking at some sundown neo pro 8") would hopefully be running both the horns and mids off the T800.4 can someone help me out and tell me if im mis…

Pulled the trigger on some sweet ass xcon 15s! Cannot wait. Have to say thanks to everyone on the forum for just being awesome in general. Special shout out to Aaron and Alton. Couldnt have been any more easy to work with. We shall call the build "SEXCONS" as per my wifes instructions (oh yeah!)

Now ill be the first to admit that I really don't know a ton about a good proper speaker setup upfront.. Iv mainly focused my attention on subwoofers for the first few years of my car audio journey as I'm sure most of us do. I'm really looking to up my game as far as my front stage goes. I'm kind of leaning towards making my own 2-way or 3-way setup. Depending on whether decide to go with a 2 or 3 way setup, I really wanted to try a soft dome tweeter along with a midrange speaker (if 3 way is the best option) mounted in the A-pillars. Then have either an 8" or 10" midbass driver in each of the front doors. My goal is obviously not perfect sound quality. I want a les…

so im looking at getting new mids and highs to compliment my MOJOs im putting in. im looking for very loud to keep up with the substage but also still great sq. im most likely going to be running either option on a Kicker 11ZX650.4(http://www.crutchfield.com/p_2061ZX6504/Kicker-11ZX650-4.html?tp=35782) 120x4 @ 4ohm. looking at either IA 6.5 and 6x9 coaxials or Alpine type R 6.5 and 6x9 coaxials. dont have any experience with either set and wanna see if someone can lead me in the right direction for my goals.

what is the difference between e8v3 and the e10 and which should be louder with a 1400 rms rated amp

i have two hifonics brz1200 i dont know if i should get two 12" digital designs 2500 or 3500 series i would get each sub d2 and wire each sub at 1ohm to its own amp my max box dimensions are 38W X 15H X 22D i want subs + port firing foward, no sealed

Ok i have 2 12" ssa zcons D1. I didnt know i could rebuild them to 18"s. I'm looking on building a wall in my car and i want to go for spl. What would be better D1 or D2? I have a crescendo bc 3500 that will be running 2 18".

I have a fi bl 18 I was wondering if the btl 18 with the ufo style magnet is worth selling my bl and getting the btl?

I have a fi bl 18 I was wondering if the btl 18 with the ufo style magnet is worth the extra 100 dollars?

I had a kid at school offer me $700 cash for my SA15s in the box. I payed 500 for the subs and box new so i'm almost positive i'm going to do it. Now, the question is do I buy the exact same subs and get a box built and take the $200 profit and get some components or something like that or do I slightly upgrade. If upgrade, what would be some good subs to look at. I'm running an saz2500 for my amp

My current setup is in a 2000, mustang convertible. Very little room. I am using 2 seperate boxes at about 1 cube sealed. I have a kicker 750.1 amp, powering two 10 inch CVRs. My question is, what can I drop in that will sound better? Of course the cvrs are loud, but after I tuned them there just not where I would like. I am looking for a cheap replacement. I may be able to sell the cvrs to some friends to help with cost. I'm looking at the Sundown E-10, so Skar IVX 10 Would an upgrade be worth if it, if so, what subs should I get? In short: 750-800rms, 1 cube sealed (each), daily use. What to get?

Im looking for two 10" Incriminator Audio 187's. If anyone has any leads to them please let me know. As we all know the Lethal Injection series took them over so they are not made anymore. Thanks

found this on craigslist. focal 165 v30 30th anniversary 6.5 components in box note even broke in jl audio c2 650 coaxils pdx f4 alpine amp the focals are gone. but was thinking i would buy them somewhere else. do you think about this this? he wants 320 for amp and speakers. whats a good price? will this be loud enough and clear enough over 2 12 icons? in a tahoe

Im looking into buying two of these american bass 12's for $400 The guy says they are D4 HD series Problem is: american bass dont make the hd in d4 (idk about the past) Im trying to see what kind of sub it really is, if its the xd thats a good deal any lower series its not a good deal hes going to send a pic of the back of the magnet in a couple hours after work which american bass sub is this? heres a pic he sent me thanks

Hi, I'm new to this. I never made a box before, so I'm trying to figure out how to make a ported box. I plan to get a dcon, but want to make sure I have the know how of how to make a box before pulling the trigger. I want to put it in 1.25 cu ft, tuned to 32hz, getting 400watts. What port area (not volume) should I be shooting for? I read somewhere that 8-12 sq in per cubic foot is good, which would put me at 10-15 sq in of port area, but I wasn't sure, so I figured I'd ask people that have personal experience what they recommend for this particular sub. Thanks

Im looking to upgrade my subs, I currently have 2 lanzar opti1232D on 2 hifonics brz1200 Which ssa sub would you pick for those amps? Maybe something else? I like mixtapes and sometimes they come already clipped but idk for a while so they need to be something that can take a little abuse My max trunk dimensions are: 36w X 14H X 22D I have a powerbastards 220 amp alt and 2 yellow top optima, one under hood one back big 3 done Ive been eyeing the fiQ

Currently have two RF T2D412 in 4 cube ported box in my 04 Dodge Durango. I am running them with two RF T1500bd-cp. Have extra battery and a 270a alt ran with all 1/0. The subs get loud and i have been served well by them. That being said they are not the most musical subs in the world and I have been eyeballing the XCONs for a long time now. Im going to sell the box and subs i have now and get new subs at tax time. So here is my question, are the XCONs my best bet with the power im running. At two ohms I SHOULD be around 1600w per sub. Also in that vehicle with that setup what size box should I build and how much port area is ideal? Would love input from anyone willing t…

I am switching sub sizes and I am going from a 18'' to 10''. I have seen people build custom subs with different motors and baskets. now my question is will any basket fit on my motor with out any problems? I have 2 18'' hdc3 audioque.

I currently have 1 sa-10 @ 600rms in a sealed box and am looking to go a little louder. I plan on lowering my amp (massive audio n3) to 1 ohm to get up to 1400rms. I'm debating on whether to get 1 12" fi Q (1500rms) or to just add another sa-10 (600rms each). They will be put in a sealed box (pls don't suggest a ported box, I'm not interested ) Thoughts?

I am thinking about down stepping down from my 18's and going with something more practical. I have a 2001 gmc 1500 extended cab and im thinking about putting 2 10'' subs underneath the seat. I plan on raising the seat 2'' and hope to have about 3.5 cubic ft. so I would like some recommendations on subs please. I have been looking at the psi platform 1 or ssa gcon but I am open for other options. I would like to go for as much spl as I can get with an under the seat setup. I have a AQ3500.1D and a dc power alt and 3 batteries. thanks for any help......

Well went to tare down my zcon 15. Going to be reconing to a 12... and the screws holding the basket to the motor are completely striped(from ssa) any idea how I'm going to get this off? Don't really wanna go spend money on a whole buch of stuff to get his off or have to re thread the motor I don't wanna mess up anything. Going to need to put the 12 basket on when I get it

Looking into getting an ssa woofer.. Found a v1 xcon for good price, would like to now the differences between the v1 and v2 xcons.... Any body have the t/s from the v1 woofers ???

I have a single Dcon 12 right now in a Starr mountain sound box tuned at 33hz (i know its not the box) and its on a Boston's acoustics gt2125 bridged for 400w but I got it tuned way down prob seeing a honest 200w if that and it has this buzzing noise right behind the dust cap almost like a rattle only on the higher notes (low notes you can't hear it) I have the lpf at 70hz I wonder if turning it down further will help but I've had it in two different boxes and its done the same way in each one and I can't seem to fig out what's going on It sounds as if I set a screw on top of the sub while it was playing.

Im wondering the best way to wire these speakers to my RF P300-2 I was thinking the 4x6's on 1 channel the tweeters on another but idk about the ohms But I want to make sure because Rockford is not cheap! Thanks for any input Tweet: http://www.sonicelectronix.com/item_18209_Rockford-Fosgate-P1T-S.html 4x6: http://www.sonicelectronix.com/item_19506_Rockford-Fosgate-Power-T1462.html amp: http://www.sonicelectronix.com/item_16058_Rockford-Fosgate-Punch-P300-2.html