Subwoofers / Speakers

If I was to get a s550.2 and two sets of pioneer components how could I wire them? If I was to wire them in parallel I would get a 1ohm load.

I have seen several good comments about their amps. My question is, are their 6.5" comps as good as their amps?? Pricing looks VERY inviting. On both the comps and their 4 channel.

Was goofing off on Fleabay, and saw these...14,000 for some 6.5 comps and a 400w amp? WOW! They do have a used set for only 8K. http://www.ebay.com/itm/Critical-MASS-audiophile-6-5-inch-complete-Front-Stage-Amplified-System-CM654a-/321336314419?pt=Car_Speakers&hash=item4ad1230a33 Can they really be that much better? I think it is funny that they state 400w rms but pair them to 100w/channel amp. Makes these 5.000 dollar Morel's look like walmart speakers! (not knocking Walmart speakers- I have a set in my burb.lol) http://www.ebay.com/itm/MOREL-SUPREMO-602-6-5-2-WAY-CAR-AUDIO-COMPONENT-MIDS-TWEETERS-SPEAKERS-NEW-/400605811874?pt=Car_Speakers&hash=item5d4…

Crossfire vr 1000d???? Heard good things about it. Do not have any dealers near me to check one out. What do you guys think of this amp. I also have heard some good things about the nine 1. How are these two amps. I am looking for something to power either a tc2000, rl-p or oz matrix elite single sealed 15. I have heard these where both all around solid amps. I do not buy from shady internet sites so any suggestions please have them be authorized or through woofers etc. Thanks for the help guys! ps: I plan to upgrade amps later on. I want solid all around amps. Something the high end guys can say is a respectable amp. But nothing cheap. Not into the hifonics or any of tha…

I have the opportunity to pick up a pair from a friend of mine. These are supposedly team subs. I think he said they are the xs v2. I know they are massive. And one has the spider that separated from the edge. But he said I could have them for $300. I cannot find any information on the 10inch version. Is this a good price? And does anyone else know about them?

I recently installed a pair of Kenwood component speakers in my 00 Trans Am's doors, but for some reason didn't think about the crossovers that came with the speakers till after the install The original ones are hooked up but just want to know if I should pull it apart and replace them with the right ones or will the original ones be ok?

do crossovers make a difference in the frequency a speaker plays? for instance, are there some crossovers them don't let mids play below a certain frequency and don't let tweets go above a certain frequency? its seems like my crystals were like that, like the mids couldn't go below 70hz, even with the HP filter off on the HU and the button on the amp swithched to 'full' . help me :/

I know that the size of my speakers is 6.5", but my question is this. I have a 1995 Honda Accord and am worried about mounting depth. I've heard that the window comes down pretty close to the back of the stock speakers and on crutchfield, I'm not sure if the speaker takes into account the mounting depth. anyone had any experience with the honda accord? or if crutchfield takes into account the mounting depth?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...ssPageName=WDVW I would love to buy them but I dont have the money right now

linky: http://nexxon.com/specials/specials.htm

I have heard everyone raving about these speakers... just wondering where i can pick up some of em. thanks in advance =) oh and incase it matters... im in Az

Has anyone had experience with these? I have read that the scs line is the ones to get if any but was wondering what people have to say about the components in general. Will be most likely looking at the 5.25" comp set possibly a 6.5" set.

Im doin another budget system for my friend (aii my freinds need more money ) all he wants is an amp and some bass thats when i came across these: http://www.uscaraudio.com/cgi-bin/u...alogno=PROse154 i was thinking since they are so cheap of running 2 of them with some amps i dunno maybe profile or something. but i just wanted to know how these things sounded.

I'm in a real debate with myself here. The SDX sounds like a solid contender, but I'm getting out of the let's see how loud I can play my music and focus on a solid sound quality application. Not an all out SQ where I'm RTA'ing and fine tuning to a flat response, but something that will play reasonably high in the freq, and not drop off at 60hz naturally, and play relatively low, as I do listen to music that extends down to 30-25hz. I will be doing a sealed enclosure based on space saving alone. I have not bought an amp yet, as this will be the last thing i get after I purchase the sub. I'm good at researching, however I cannot find any good info on the SDX. The Le and …

Has anybody used these? Interesting specs - XBL^2 motor design, copper coil, 3 shorting rings in the motor, high xmax. You can pick two of these up for $519 plus shipping(?). For car audio use they look like they ought to be good SQ subwoofers with good low end extension in the right enclosure.

how many cubic feet for an icon 12 and a 15 for a sealed box and what is the mounting depth on both of them

Should I run two of the sundown zv3's or 4 sa's The amp I'm running is the 5500 crescendo

What amps do you guys use when you need 6 channels of power for this set of speakers? Or do you mostly break it up with a 4 channel and a 2 channel amp?

Currently I have the Alpine Type R SPR-135 5.25" component set, the older model. They are on my Rockford P500-2. They keep up fine with my 18" on most songs, but do fall behind on bass crazy songs. So I was thinking of upgrading to better speakers, as I want more SQ, but still need to be able to keep up with my single SSD 18" on a SAX-1200D SPL wise. I was looking at some pro audio speakers on parts express. I notice there's a lot of setups were people run the 6" selenium woofers along with the ST350 super tweeter. Are these a better setup for SQ than what I have or are they purely SPL speakers ? If I went with those as my mains it would require some fabrication. …

I had 6x 8v batterys i aquired in a trade, and a Friend of mine Alan needed them, So we worked a Trade, i needed a Sub for my Niece and did not want her to have generic Junk, ( we live in Louisiana ) it's a long storie but Alan Hall built this sub from: a Kove Audio Armageddon Motor / DD 9512 Basket / Re Soft parts i cant have MY Niece running around town with common JL/RF/Kicker crapp we build the boxx tomarrow... now too find an Amp

I have a 1995 Honda Accord. I was thinking about putting in some tweets in the a-pillars of my Honda. I don't want to make it a guess and check scenario and mess up my a-pillars. Is there any place or can someone tell me how I can obtain these custom a-pillars or how to make them? Thanks, -Curt

I'm thinking about trying to build a subwoofer with a Ti basket and a 3'' 400 oz motor but I don't know what would be the best voice coil for it

pics : http://pierceaudioproducts.com/forum/index...opic,162.0.html This is designed to take both of my SAZ 3000d amps DAILY / Street Beat

hey guys, if i needed a level 2 or 3 in a dual 2 ohm configuration, can you make that happen for me??

Me and my buddies were messing around welding and wiring two horn voice speakers together Sharing the mania!! Looks like something out of the haunt... little video http://s1313.photobucket.com/user/sgunnem/media/VID_20130429_192648_zpsff6226e9.mp4.html