Subwoofers / Speakers

Hey guys, I am maybe looking at doing a Diy component set using the Mli-65 Mach speakers. Right now I currently have 5 1/4inch Alpine type S speakers in Q-logic kickpanels becuase my car is a 94 cavalier which only supports 3 1/2 speakers, so I bought the kicks instead, With that being said I was wondering if there is any way I could make A wooden baffle so that I could mount 6.5inch mids in the kicks? Also how would the Mli-65's work in a Diy component set? I was thinking something like Wiring the Mli-65's directly to an amp, then from the mli-65's run a inline bass blocker to the tweeters do you think that will work okay or am I better off buying a inline crossover? I …

Ok well getting ready to start work on my van and looks like im going to have to make a few slightly changes. The plans were as followed Midbass 60-100hz : Sundown Audio SD-1 10" x4 Mids 100-2500hz : PHL 2002 x2 Mids/Highs 2500hz + : Image Dynamics CD1E Mini x2 Mids/High Amps : Sundown 100.4 x3 (Bridged To Each Driver) Here is the problem, i dont have the space under the dash or anywere to mount my ID horns. I deffintly want to keep the midbass. So what i need is suggests for mids and highs drivers. What im looking for is an extremly loud and clean sound mids ands highs set up to keep up with my wall. Power will be coming from sundown amps. Corey

I have been reading alot about DLS speakers, and was wondering if anyone out there has used them. mainly the componets sets. if so any feed back would be a help...PS. im looking for SQ sound qualty. thanks

Well, it looks like I got screwed on eBay on my speaker purchase so I'm in the market for speakers, AGAIN. What do you all think about the items listed above? I can get all for about the same price, 450-500, new. Help please Thanking you in advance Mike

is this a good speaker to buy? http://www.mobilesoundworks.com/ProductDet...roductCode=ms5a

I was wondering for those of you who own this particular sub, what kind of enclosure do you have it installed in? I'm considering porting it. DLS recommends sort of a high tuning. I'm thinking tuning it to the low 30s. I don't want to have any peaks in the response, so I want it to tune a bit lower than what DLS recommends (or should I just stick with their suggestion?)

I plan on purchasing these soon (unless there is something better for the same price i should consider) and was wondering what a good amp would be to power these. Also, I guess i will ask. Would these sound good along with my 15" ICON? Thanks in advance, Alex

Hey guys I was just wondering what you all think about these 2 sets of component speakers, Theyre right around the same price range, ATM im leaning more torwards the DLS's since they have a shallower mounting depth and are a bit cheaper too. Let me know what you all think of them and wut U would choose out of these 2 sets, Im open to suggestions on other comp. sets in the same price range of about $220max. And if U have any links please post them as well. Oh and these will be powered off a USAmps MD42. thanks everyone.

Currently have the PG RSD's Been happy with them since day one especially being that I paid 50$ for them new. However, a tweeter blew awhile ago and I replaced it with an Infinity Ref series I had laying around. To say the least, its half asssed. I want to upgrade to something really good, my budget being about $200-$215 Ive heard good things about the DLS. Opinions or comments welcome. Using a Alpine Digital Mrv F345 rated @ 75w RMS and my doors are deadened in my 2001 Maxima GLE THANKS

I was listening to my stereo on the way home and stopped to get some pizza and waited in the car with the stereo on. I decided to not be a prick and I turned the sub off. I missed the bass so I turned my HPF off at the HU, which I usually have set at 63, and the mids actually do pretty well with the bass. I turned it back on and set it at 50Hz and it wasnt bad but theres so much bass im missing with it on. I am going to continue running the HPF at 63 when I have the sub on, but the times I turn the sub off I would like to disable the HPF to the mids to get some bass back. I was thinking of going to the amp and setting its HPF so that if I turn the HU's HPF off, the amps H…

I have two 18'' zcons now and i have the stetsom 14k.... I have the astro van so the room is there but do i really NEED two more 18's? I know I WANT two more 18's but do I need to spend the money......

My subs been "rattling" for a bit and finally went back there to listen to it and it sounds like this: http://imageshack.us/clip/my-videos/193/sdm.mp4/ Obviously it was playing at low volume, and I held the cam so close because I wasn't sure if my phone could pick it up as well as it did lol. Does it need a re-cone already or what? Ive had it for about a month, maybe less.

i want to run my amp at 4 ohm bridge (because that is all it is capable of)... so if i were to get two 12 d2s mags would i need to get a new amp or would it be ok for me to wire the sub at 8 ohm and run it like that?

This is by far the single best investment I've made in yrs. Everyone hates doing recones cause of cleaning the dreaded basket. Fear no more! Took all of 5 mins. to clean.

Sorry for the newbie questions.. i am in fact a newbie. I purchased 2 12" ICONS to go in a 4.5 cuft ported box (which is currently being custom built for me) do i have to break them in? or can i just pound em out? also, if there is a method to "breaking in" a sub.. what is it? Thanks.

this is a quote from some guy talking shit on my box is it even true what he says i think it sounds good "Pre-fab means Prefabricated. It means that the box was Pre (already) Fabrication (made) before installation. Even tho you have the measurements for the inside of the trunk. Doesnt make the box ANY better. The box you have I GUARANTEE you sounds like crap, just because of the fact that there are not seperate chambers for the subs. This means that the back flow (the air you feel, when the subs hit. IF you have a vented box); The back flow from the subs facing the back of the trunk are reverberating the subs on top of the box. This means you have double re-verb, which s…

does any one know when the new MAGs are going to be out, also do you know any other brand that will beat out a MAG in sq, in the same price range

Hey I have a 400wrms x2 amp and I'm picking up a set of Diamond Audio D971 comps. This is a dumb question most likely but the constant rating is 200wrms and the max is 400wrms for the comps. If I throw them on my orion amp pushing 400 wrms into each channel with the gains set low do you guys think they could deal with it? I'd hate to buy another amp. I can run them off of 100wrms each but then I'm not feeding them enough power....its a catch 22. what would you do?

Alpine spr components in the front Alpine sps woofers in the rear deck All amp'd up on a crescendo 1000c4 125 wattsx4 at 4 ohms 12 ssa icon off an amp I have not yet purchased All off stock 2008 chevy impala deck

I want the Sundown Audio SA-15. Two of them. And a SAZ-2500D. One of it. Will I overpower the subs? I know, i know, the specs say 600rms but I want to hear some experienced people tell me how hard they bang and if they can handle more. Just looking for some nice project ideas.

Do you think the Zed minilith would be a good amp to power my SI 15 or should I keep my Concept CC-D1200. TheCC1200 has a few issues but has more power than the Zed but the Zed has a nicer build and can make more than the rated 600rms. But I like to have the overhead. Also the 15 has a slightly softer suspension, correct, than the 12? So having 1200rms on tap isn't needed. Who knows.

2013 Dodge Avenger speakers what ohms?

does a Magnum D2 12" come in dual 2 ohms or 4 ohms? P.S. just something thats been on my mind ever since i found stereo integrity forums... With the Mag being such a good subwoofer how come stereo integrity isnt up there with JL audio, Rockford, Kicker, and the other leading brands?

I'm looking to pick up a 10" for my blazer and two 8"s for a buddy's truck and these seem to fit the bill for our applications, but I can't seem to find any sound reviews from people on here. Has anybody demo'd them or heard them at all? I don't doubt the quality of them as they wouldn't be on SSA if they weren't of the highest quality, but I'm just curious about the SQ, particularly in a small/medium sealed box.

I bought a 2 12" TC-3000 last year, the DVC version with lower BL. I went to a shop and got it installed, but now I want to try and redesign my system, by building a new box and possibly purchasing some new amps, but I don't know what the T/S parameters are[DVC's should be different than QVC], the wiring diagrams[ohm load] or power ratings. I've checked the old TC website, but they only provide information for the QVC version. I've also tried calling them, no luck.. Are there any tools I could use to figure this out or is there anyone that might have all this information.