Subwoofers / Speakers

____________________________________________________________________________________________________________ Video of the 1 in the jimmy! 4 in wills whip!!!!!!!!!

Is a 139.8 on music loud for this?

Is there a way to check how DVC sub is wired without taking it out of the box by using a dmm? I would assume to just check the + and - coming out of the box (theres only 2 terminals in the back). And see what the ohms read. Am i correct or no.

Hey everyone. I am getting ready to order equipment for my new boat. In my last boat I ran two FI Q 12's with the high qts option in 1 cube sealed fiberglass enclosures (after displacement) with 1200 watts rms each. With that I have two questions: 1) What subs would you recommend (I have been looking at the Xcon, Q, and Exile Big, but am open to anything). I have a Exile 2500.1 amp that I plan to use which puts out 2500 watts at 1 ohm. 2) What would fit best in the space provided (info below)? (I know I can fit 2 12's sealed again easily) Anyway, the new boat gives me some more room to play with, but limited access. I know I want to install one sub on the drivers si…

So I just moved my Pioneer sub into my BMW 328i. Same enclosure, same amp. New power/ground wires, new rcas, new speaker wire. The headunit is BMWs factory and the amp is getting signal from a LOC that is connected to the BMWs factory amplifier. The subwoofer does NOT sound the same anymore as expected. But the problem is that its not close to as loud as it was on the expedition. They told me the BMW has a well-sealed trunk, could this be the reason why Im somehow not feeling the bass anymore? I also had to lower the gains a bit (from what I had it on the expedition) and the sub gets hot faster and my trunk has been getting that burning smell constantly since I installed …

Can anyone tell me what's so special about the 9500 series and below? Why is the 3515 series map $500? The AQ HDC3 is way less, the Fi BL is way less, Hell the BTL N2 is less as well. Please, I feel really retarded that I don't hang from DD's nuts since their products are so superior. Please tell me why I should get a DD3500 series sub and pay $500 map pricing or tell me what I am not understanding. I posted here to get non-nuthuggery answers.

What are some user reviews of the Digital Designs 2500 15"?

I own a 2006 Pontiac G6 3.5L Sedan. Im looking to install a system, but its been so long since I had one. I'm looking for a lot of bass but SQ is more important. I was looking at the Icon and Dcon series subs here. What I'm wanting to know is which would be better in your opinion for Tight bass and great SQ. I was thinking 2 10's or maybe 1 15'. Thanks in advance ~T

So im planning on getting 2 12" xcons I have the money to get one right now. I already have a 12" enclosure. I could order one (when they become available) and use it on the current enclosure while I wait a bit til I can get the 2nd one. My question is, will there be any unbalance or noticeable difference when it comes to the break-in period? If I go this way, by the time I get the 2nd one, the first one might be already breaking in and I wouldn't like unbalanced bass. Sorry if this is a really stupid thread, I dont know if such thing is possible or if humans can even hear such a difference. But I rather ask than regret in the future.

i want to get louder but im on a budget, so someone told me that i could recone my 15" Fi SSD to an 18".... how hard is this to do or am i required to send it off and get it changed? Iv never done this before so all information and recommendations is helpful Also, what difference in loudness would i notice the box will be 6 cubes at 32Hz. in advance, Thanks

Hi all, First of all let me start out by saying how happy I am with my 12" ICON I bought almost a year ago. This thing blew me away for the price I paid, but now I want more! Right now my setup is 1 12" ICON powered by a Sundown Audio SAZ-1000d and I have a couple of questions about upgrading... 1) Should I get another ICON or upgrade to 1 XCON? (either setup will probably be going in a sealed box) 2) Was thinking about purchasing another SAZ-1000d and using the master/slave feature to power whichever setup I go with, or would you recommend buying a different amp at like 2000 watts RMS instead of linking two together? Also, cost is important to me.

Best 10" that'll work in .8 with 7.5 mounting depth? $600 is for both amp & sub. This is gonna be for an sq system in a g35 coupe so gobs of output isn't a requirement.

Im strongly considering a 12in DCON S4 for my daily driver. My SA-10s are going to be moved to my Sonoma when its running, and I want to try something different for my daily (07 Altima). Ill get a Crescendo 1000C4 and bridge the rear channels for the sub, having 500rms on tap for it. I listen to mostly rock and techno, very little rap. I like to have more mid bass then really low end, but still would want it to get pretty low. Id like to have the LPF crossed about 100-120Hz. Most of all, I want as even an output across the widest range possible. Looking for more of an SQ setup. I dont care some much for loud bass, as I do air moving bass if that makes sense. I like to f…

I just bought a 2011 Mazda 3 and since I just bought it tonight I haven't had much time to really search everything out about the car but from what I found online it looks like it has 5 1/4" speakers which I know there is two speakers in front doors and two in the back, i'm not sure about the rear deck or any tweets around the dash, which I will check tomorrow when I get a chance, but anyways I was wondering if there is anyway to fit a 6.5" speaker in the 5 1/4"? Should I just get two front speakers or two fronts and two rears since they'll be in the doors, which I do plan on amping them? I know this is all personal opinion, but I mainly listen to metal, but I also listen…

I am shopping for two 12" subwoofers that will work well in a small vented enclosure. I would like the net volume to be 4^3 ft. or less (net meaning not including driver, material or port displacement). Some other requirements are: ~2000wrms per driver ~low f3 ~daily setup, music only ~enclosure tune to 30-32 hz with a 60-80hz xover point ~I mostly listen to rap I am considering having custom subwoofers built if needed. What are "ideal" T/S parameters based on my preferences?

So i've decided to go with the 18" BTL N2, but was wondering if i should get the cooling option or just the p chamfer because in the tech area it says getting the cooling will weaken the metal- what do you guys suggest i do- im getting all other options. Its going to be for everyday play. Thanks in advance.

Hi guys, Im not quite sure if I put this in the correct section but Im sorry if its not right. Anyways I found I really good deal on a W7 on Craigslist close to my house. I was going to call the guy and make a time to check out the sub. Im pretty dumb when it comes to knowing what signs of abuse are for subs but I was wanting to know in general what are some things I WANT to see as well as some things I DONT want to see (as far as whether I should buy the sub). I mean I know that holes in the subs surround or any cracks are bad but as far as the mechanics of the sub what are some signs of abuse. Hope this makes sense.

My buddy wants me to put a system in his boat, and I'm looking for a sub any suggestions?

I have a 2002 nissan altima without the bose speaker system. I currently have a Pioneer deh-4200ub headunit and in the front I put in 2 alpine type S coaxial speakers. In the rear deck are 2 pioneer 6x9s that were installed by the previous owner. Im looking to add some more midbass to my system because the current speakers just seem sort of flat. I dont have an amp hooked up and the HU is powering the speakers. Ive read here that an amp is necessary to get the most out of your speakers because the HU pushes something like 22w. Im pretty content with the type S's up front sq wise. They are 5 1/4 if I remember right and thats all that would fit in there without fabrication …

My buddy wants me to put a system in his boat, and I'm looking for a sub any suggestions?

Would i need a double thick front for 2 15 inch IA Flyatlyns?

Sorry, I already know I Posted this in the Fabrication section, but I forgot to make a poll out of it. So I went to go edit it and then I got to thinking, which section should I put this in to get the most attention? So Mod's if you feel necessary, please delete the one you think would attract the least amount of attention, but Id like to have the Poll. Hey guys, I am in the talks with Steve, the owner of Subthump.com. They make some of the best sealed prefabbed boxes I have ever dealt with. They are simply amazing, the prices are budget friendly. Their main focus are on sealed boxes, because they aim at the people who are on a budget and they can mass produce. So I have…

Ok so my sub stopped playing today; neither coil will measure either. The only thing that is bothering me is that I cannot understand why. I do not think I overpowered it in all honesty. I've had the same amp on it for 2 years. The coil visually looks brand new: no melted former or discoloration. I cannot see breaks in the tinsel leads or wire ANYWHERE. There is no evidence whatsoever that the bottom of the spider crashed into the top plate; none that I can see. There is no rubbing when I push down on the cone. I've tried the sub on multiple amps. Any ideas what broke on me? Tinsel leads broken inside of the spider? That wouldn't make a lot of sense, though. The spider is…

I have a JL Audio 500/1v2 & am ready to add my substage. I'm using an Alpine-CDA-9886 h/u & Image Dynamics CTX-65 components up front, powered by a JL Audio 300/4v2 (running active). I know JL Audio isn't very well liked around here, but I got the 2 amps lnib for $280. I originally planned on porting a single Sundown SA-12, but now I'm not sure. I can get a brand new Sundown SA-12d2 for $160 locally, or order a 12'' MB Quart RWE-302 from woofersetc for $70. I plan on porting either way, & I have a Grand Cherokee, so space isn't an issue as I've heard the MBQ's need alot of space. Opinions? http://www.woofersetc.com/p-3415-rwe-302-mb-quart-12-1000-watt-referen…

Hey guys, i have made a little bit of progress in terms of my build. Purchased an saz-1000d so i had a place to start with because i honestly couldnt make up my mind what i wanted to do so i just decided to buy something and get started. I currently have 1 jl w6 and i would like louder, but still sound really good playing music. I will be getting a box custom made, i am now down to picking the subs... So a couple questions... What should i go with considering the amp. 1 15" or 2 12" Including the box, i am looking to spend somewhere in the 700.00 range. I hope that this has given ample enough information to tell you what i want so you guys can point me in the right direc…