Subwoofers / Speakers

looking for an ascendant audio dealer close to 78557, thats south texas, want to buy a pair of 10inch chaos

I'm looking at putting 2 sealed 12's or 1 ported 12 in the space under rear deck in Lincoln town car. The space is available is 41"W x 10 in H x 16in D. If ported is the way to go I'm going to have to the shop to build it unless you can give me plans to do so. I hate to spend $450 on box. I can do the sealed. Is it recommended to have each sub in it's own chamber(for sealed), or can you just use the whole box for both. Just want to sound good on all types of music. (metal, rap, plain rock, ect.) Any more info needed let me know. Haven't bought amp yet so will buy accordingly. Appreciate any help. I'm open to different subs, especially if they were cheaper and sound good.…

Alright so is the btl N2 most like the previous generation btls? if not what is most like the old btls?

can or could a skar 12" sub handle bouts 700-800 watts ??? i wanna buy a pair i no everyone says a sundown 12 will but not much on skar subs , im running a kicker1500.1 amp

Does anyone know or ever had experience with these??? All answers apreciated!! O2 OXYGEN AIR-63 Comp Set

well, being who I am (very inquisitive by nature) I constantly find myself loomking at audio equipment, and as such, I always wonder to myself, hey that would be neat to have etc... So, I keep looking at 15 inch subs lately for some reason, and more specifically, at the RE SEX15D4, has anyone on here have experience with it? I just may, and a big "may" be able to convince the wife to let me buy one..... maybe... It'll be powered by a JBL GTO 601.1 amp. Again "if I can convince the wife" Thanks for the advice in advance, even if it is for naught...

I got a question, everyone says that playing a subwoofer below the port tune will cause the subwoofer to be unloaded, and with too much watts it will "bottom out" is this unloading the subwoofer basically becoming a sealed box with a 4", 5",3" etc hole in it (loss of major amount of bass) , or the unloading making the subwoofer box be like an infinite baffle, decreasing power handling, but increasing efficiency? if it is infinite baffle, would it have a similar 6db/octave (i think this is close) roll off instead of a usual sealed boxes 12db/octave

Subwoofers the Boss of a series the phantom, a myth or a reality - SPL 96 db, for example here the such Boss P126DVC. Thanks for answers.

I had a 12" Fi BTL off a 2500D Soundstream Rubicon in my previous car. It sounded great, but got used to that. Now looking to upgrade. Did a cardboard mock-up in my new car (2005 Civic) and trying to decide what subs to go with. I'm looking for a lot of air movement, hitting deep, and sounding clean. Was thinking 2 x Fi Q 15's. What do you think? Would like to keep total power of both subs combined under 2000RMS. Dimensions, minus the angle..Looks to be about 3.5cuft per sub after displacement. Quick question, when I move the port to the middle would I have 14" of length on each side or 7" on each side per sub? Layout will be like this, common chamber.

OK heres the deal I went to quite a few audio shops today to price a box for two ported 15's and the answers that i go wasnt the ones i wanted. The only shop that was willing to do the work and told me they would fit is closing for renovation. so now im looking for some 15's that would work great sealed 15's or some that will work good in a small pored enclosure. Like i said in last thread i dont have an amp yet but im purchasing my whole system Monday. the max for each sub is $400...and yea im stuck on two 15's now even though everyone is going to suggest 12's

what 15" sub have the most potential im not looking for a high class spl sub or a one note wonder..i think im going to have a enclosure designed to have my subs firing into the cabin...im sorry for posting a thread similar to my last i just want to get all the info i can before i purchase my subs within the next week or so. since all these subs basically require the same size enclosure (3-4 cf) no need to post that, power will be no more that 1600/per. GOAL-loud as hell and able to take a beating daily and sound good doing it DC level 4XL FI BL (4"coil & Flatwind) Sundown Z SA-15

hello there, i found a jbl gti sub. it looks pretty mean but i was wondering if anyone knows anything about them or has owned one. thanks

has anyone here used this sub before? Reason im asking is there is one here locally on CL. Price is $250. Seems like a healthy sub. I recently installed a 15" Fi Q in my s10 and im not happy what so ever with it. lol. Clean sounding sub, but not what im looking for. Plus the box is bigger than i really want. I want some pressure in this truck. All i know is what I read on treo's website which makes me believe this will be a better choice than the Q im running now. Looking for anyone with hands on experience or atleast heard one before. This sub being a 12" will hopefully let me build a little smaller box than I have now. Probably power it with a audiopipe 1500 for now.

looking for suggestions for a sub n amp set up for $500-700. got a '01 expedition.3rd row removed. i've only had a single 15 before so that's what i been considering. listen to rap/hip hop only. going for spl not sq. want the biggest bang on my budget. some have told me to consider a 12 in place of the 15, but i want to make sure i can still get low and loud. thanks for any help.

I was needing you guys help on finding a good pair of 6.5s for a budget of about 150 dollars.. All answers would be greatly appreciated!!

Hello SSA, i recently picked up 2 12" mtx 9500's in a custom HUGE ported enclosure. i have a ext. cab ford ranger and the box is about 6"'s from my roof. the length of the box is fine, but its WAYYYY to deep. i was wondering on what i should do. i had 1 12" mtx 9500 in the sledgehammer ported box and it sounded AMAZING in my truck. i know alot of people say the sledgehammer boxes are hsit, but for osme reason it sounds really good in my truck. i cant find the sledgehammer boxes anywhere, so i decided to just build my own. iv never built a box befor. i have all of the tools to do it and all the materials in my garage ready to be cut. i have a good amount of knowledge when …

Sup.. I haven't posted on here in ages because I took an lil break from car audio for an while, but with every other hobby you get that itch again and get tired of not having bass in your vehicle. I'm in a lil dilemma here. I can't make up my mind on choosing on what subwoofers I should go with. I really want 2 10" because I've never ran 2 10s before. Only 12's, that's only what I have room for seeing that my trunk is really not that big..Here's what im aiming for. 2 10" ssa dcon 2 10" sa-10 or 1 12" sa 12 2 10" sdc2.5 1 12" hdc312 copper coil Also on each particular setup, what would be the suitable amplifier is recommended and I'm going to be build my own ported bo…

http://www.reconingspeakers.com/ so i've been looking for a recone at a decent price for my RF power hx2 15 and came across this site. they r the best deal i can find. full recone kit for $75 which is 10 bucks cheaper then forevrbumpn from smd. they only show the 12" version of my sub on the site but i emailed them n they got it for mine too. anyone ever dealt with them or heard anything good or bad about them?

I recently picked up a 12" IA Death Row series for $80!! Unfortunetly I could not compare them sound-wise because the Death Row wouldn't fit in my enclosure's hole. SOO I figured I'd give you guys some pretty pictures to look at lol. The SI is a V1 Mag Claw w/ V3 softpart Recone, Enjoy! Vid of Mag off 240watt plate amp The Mag is heavier btw.

I'm looking to switch from a single 18 to two twelves and want a good mix of SQ like the poll says. It'll be run on 2-3k. Vote up! If you have any suggestions then throw em up.

I currently have a 1974 dodge charger. it only has one speaker in the front. And some crapily installed rear 6x9's I'll be fixing later. But for now. I'm doing an install of a center console I've built with an aftermarket head unit. Not wanting to cut anything up. I'm going to stick with the one front speaker for right now. Then build something to house 2 smaller speakers displaying the sound out the hole for the one that was there before. But for now. I"m sticking with the one. So is there any way to hook both the left and right front speaker outs up to this one speaker? And if so. Would it sound good like this? both sound from the right channel and left channel would co…

http://www.edesignaudio.com/product_info.php?cPath=1_23_127&products_id=617 System Type 2-Way Frequency Response 40Hz - 20KHz System Sensitivity 89dB Final Impedance 4 Ohm I currently own these 2 amplifiers: Boston Acoustics GT2125 Sundown SAX 100.2 One of the crossovers is damaged so it cannot be used. What could I do? Could I possibly run the tweets off the BA amp and the woofer off the Sundown amp? Other suggestions??

Right now I have two 12w3v3 running on a MRP-M1000. I've been thinking about selling this set up and going with FI BTL N215 running on a Hifonics HFi2500D in a 4.4 CuFT box Any suggestions?

For my summer rebuild I'm considering doing either 2x the new Sundown X-12's or some Fi BL's but I'd like some opinions on the BL beforehand. The main thing I'm concerned about is that they'll be too peaky, I ran a pair of them through WinISD in 4 cubes tuned to 32hz and it showed them EXTREMELY peaky and that is not what I want. So anyone that has heard or used these please give some input.

i just had my xcon 18 installed being pushed by a aq 2200d in a 5 cubic box and its loud. well im looking to buy 2 12inch 2011 icons in a ported box what will be the sound diffrence such as hitting lows an what not thanks for any help