Subwoofers / Speakers

I am looking for a company who will ship to my address: FPO, AP 96348 Also, I am looking for new recommendations for sub and amp. Reference thread: Clicky

Guys, Sorry wrong title I don't know how to edit title What will you choose between these two setup 1. DC Level 5 15" will be powered by Amp 3,000 watts or 2. Warden 12" will be powered by strapped two 2,000 watts amp. Both will have sufficient power to back them up.(HO Alt, batteries and big3 ) Thanks in advance!

How do you guys make this connection? I bought 8 gauge speaker wire thinking "Yeah! This will be some great speaker wire" but now at this connection point I have to fit two ends of wire into the terminal. I'll have to cut off a lot of strands. I didn't have to do this on my last system as is wasn't wired down to 1 ohm. Anything I'm missing here? Or is that the only solution? Thanks.

So i've been browsing around for some components in the ~75Wrms range, and I saw that Rockford Fosgate has some Power series components that fit the bill. The T1652-S and T2652-S look exactly the same, except for the fact that the T1 can be had online for 80 bucks, and the T2 is still around 200. As far as I can see, there is no difference except that cooling vent on the back, the tweeters are silver, and there's a pointy thing in the middle. If we're being honest, i'm not really going to push them too terribly hard, so I don't think that I would need the extra cooling. I guess my question is: does anyone have any experience with RF speakers, and does anyone know the real…

I am looking for a loud and clean pair of 6.5 components for between 200 and 300. Does anyone have any suggestions? I plan on throwing about 100 watts to them or more if they require.

Okay. The sub system is powered off of 1 JL 500/1. I have already asked you guys about a Dcon setup.. I figure these are my options: 1. I can install my 04S15L7 which is a 2 ohm DVC which I would wire to 4 ohm. This would require that I get an enclosure for it, which would run me in the $200 range. 2. Next is a 12" Dcon in a ported enclosure to spec which would run me about $300-$350. 3. Lastly, I was thinking dual 12" Dcons in a sealed/ported enclosure which would run me about $405-$500. Add another $400 on top of that because their is a big chance I will be get a DC Power alternator during this process. What do you guys think?

Ok guys I got 2 10'' JL w0's (old ones), they beat pretty good in my truck (ext. cab sonoma), but it is time for bigger and better things. My buddy has 3 12'' JL w0's (also old ones) that I am buying, but 2 of them are 4ohm and the other is 8ohm. I have 2 amps to use. I'm not sure if I should run all 3 12's ( 8ohm on one amp and 2 4ohm on the other), or run the 2 4ohm 12's with my 2 4ohm 10's. Either way I will build a sealed enclosure with each one in its own chamber. I'm just open for suggestion. Got alot of stuff and don't know what to do, any help is appreciated. Thanks!

Have a question about which voice coils to go with, dual 1ohm or dual 2 ohm? The dual 2ohm will give me a 1ohm load which is 1200wRMS from the 1200d while dual 1 ohm will give me a 2ohm load which is 870wrms. The sub is "rated" at 1000wrms but I have watched a bunch of videos and alot of people have written about giving them alot more power. So my question: Do I play it safe and go with the 870wrms or can this sub handle the 1200wrms without being damaged? Thank you.

ok so i found these and they are well within my price range. are these eclipse 3 way component sets any good? anyone here that has used or heard them? they seem like a steal for a 3 way set. 6 1/2 eclipse 3 way set

Ok I dont understand how the guy from the tahoe is running 12 tweeters from one T600.2? Yes I also dont understand how two 1000.4 amplifiers are running ten 6.5inch speakers, two 4inch midranges and two 8inch midbass Can somebody tell me how is that wired? doesnt so many speakers on each channel cause the impedance to be insanely low causing the amp overheat or inestability? am I missing something here?

Ok so I will be getting an 18 soon, still debating whether an AA SMD or an SSA XCON (The SMD is like $400 more, idk if the gains are worth that much) Anyways, before anything I know I need to have my electrical ready so here comes my question. Right now my Ford Expedition is 100% stock. It only has a 2000D powering a Pioneer 12inch sub with 1000watts RMS. I know the Big 3 is A MUST HAVE. But, do I need a new alternator? Do I need a new battery? Do I need more than my stock battery? The reason to ask is because if I get the sub + the enclosure, I will most likely have no money left for a new alternator or new/extra battery. And hopefully the 4gauge that I have right now wi…

Hey im a little stuck between thse two setups. Fi BL 15 w/ cooling in a 3.5cf tuned to 32hz after dis. or 3 sa-8s in a 2.5 tuned to 35 hz after dis. What i want from it is low hard hitting bass. I want it to get loud but retain some sq. Loud>sq though. In terms of powering it. It will be the same amp whether i get the BL or the 8s. 1500 watts. What it will go in? 2001 Mitsubishi Eclipse. Need any more details? Just ask. Thanks in advance.

is there anyway i can get 6 10's to fit on box thats 30x24 tried using the google sketch and stuff to make box and move around the circles and see but i cant use the program worth a crap lol can anyone help me out here

As far as I can tell most people are mentioning 300-400watts for the Dcons which is fine for my current amplifier setup. Question is, if I upgrade to a JL 500/1 would it be overkill for the Dcon? I know seeing the full 500watts is probably not going to happen, but I would like to know if the Dcon can handle 500watts daily. Like 4hrs a daily 5 days a week. Also starting looking at the Mach5 IXL subwoofers since I see that as a similar recommendation when people are mentioning the Dcons. Any experince with either subwoofer would be great. I love Image Dynamics but cannot find anyone local(plus I h8 the local guys) who would just simply order through their shop, and I know t…

So Im about to change my factory speakers to a 2-way component set. Right now, I will be running passive (HU->crossover from components->woofer/tweeter) but in the future, I plan on adding a Sundown 100.4D Will this be right? HU->Amplifier->Crossover from components->woofer/tweeter) Also, is this considered active? The reason why I ask is because I plan on buying Morel Hybrid Ovation II components, and the dealer Im getting it from told me they put a lot of work in the crossovers. At that price, I wouldn't like to put those crossovers in a box in the closet, but I wont use them if you guys tell me its better not to have them if there is an amplifier already…

I have one of these that's been sitting around for a really long time. I want to build a box for it but I don't remember how big of a box I need and what I should tune it at. I can't find any info on these much less anything about the company. Anybody have any idea?

Assuming Both were ran in optimum ported enclosures, running off a SAZ-1500d @1ohms (i know way too much power, gain would be set correctly don't worry), which would you choose and why? Looking for more SPL than SQ, and this will be a daily beater setup. I'm looking between the upcoming sa-15 and 15" SSD w/BP power, I understand the sa-15 isn't out yet, but judging by the specs which would you prefer? Obviously the SSD is rated at 800rms vs 600rms for the SA, but it seems like the Sundown is very underrated... I think it would run at 800rms fine. So far the differences I can find is the 2.5"(SA) coil vs. 3"(SSD), the SSD has a slightly lower FS (29.6 vs 30.9) as well as …

So I finally order a set of cheap comps to upgrade the crappy stock speakers. I'm wondering whats the best way to position them when you are so tall you pretty much sit in the back seat to drive? Right now I tend to hear the rear speakers more so then the fronts as I sit so far back. The front stage will be louder then the stocks running off the HU, so I think I might be ok. And advice from you other tall people? I'm 6'6" for inquiring minds. I was thinking maybe building pods just off the bottom corner of the door by my foot and firing the mid's towards the back more and possible putting the tweets on the pillars. Clueless right now. Goals are just to keep up with the su…

i drive a 2003 toyota tundra access cab with the door tweeters and i want to get a component set that will go well with a 15" fi bl. what do yall think i should look into?

Hello. I am new here and looking for an answer to an easy question. I have a 2002 Civic and I am looking at a Q Logic Custom sub box. First, does anyone have any experience with those units. Second, the volume of the Q Logic enclosure is 0.65 cu. ft. The Fi Q I am looking at calls for 0.2-0.6 cu. ft. of volume, but it has a 0.12 cu. ft. displacement. Does this mean the Q Logic would work? The way I am calculating it is that 0.65-0.12=0.53 cu. ft. volume after installation. Thank you in advance for the help. Nick

I am thinking about re-doing my setup and would like some opinions. I am thinking about moving my 4 DP21"s to the passenger side, and port on drivers side. Then the idea for 8 15"s started creeping into my head. The subs in each setup will be on 2k wrms each, so it's not really a fair comparison since it will be twice the power with the 15"s, but o well. The 8 15"s would be on bottom with the port across the top most likely. Some of the subs I have been considering for the 15"s are: BTL's, new DP's, Lvl 5's, and Exos. Right now I am leaning towards the Atmos Exos. Wall is in an 03 Expedition at the B-pillars, 40 cubes and will be tuned somewhere between 28 and 32hz. Prob…

Im wondering which to get. 2 Fi SSD 12s in its optimal enclosure or 2 Sundown Sa-12s in their optimal enclosure both will be running on the same amp. Im wondering which would get loud and retain sound quality while doing it. All ported by the way.

Ok so here Im going to get Image dynamics XS-65 which consists of a 6.5inch woofer and a tweeter. Thats 2 way right? So if I plan on using it together with my 12inch subwoofer, would that make my setup a 3 way? I just read that for a "true" 3 way, you need a tweeter, a midrange (3 inch) and a woofer (5-6inch). So I was wrong the whole time? Then if you add a subwoofer, you actually have a 4-way system Also, from what I read is that what Im actually going to have (with the xs-65 components and my 12inch sub) is called a 2 way crossover + subwoofer and NOT 3 way? So this confuses me even more because.... if you get a 3 way component set, then how do you run them active? A .…

I got 3k and 7 cubic feet before displacement to play with, what can I do to get a hairtrick? Budget is 600 dollars for just the subs. GO.

How are these subs and can they take more than rated DIYCable.com : Intro » Home » Exodus Subwoofers »