Subwoofers / Speakers

I just bought a set of Bravox CS-60K 6.5's new off of Ebay and was wondering if anybody has any experience with this component set. I got them for a lot less than the new set goes for so I figure it couldt hurt to give them a try.

I am looking for a loud and clean pair of 6.5 components for between 200 and 300. Does anyone have any suggestions? I plan on throwing about 100 watts to them or more if they require.

I am thinking about re-doing my setup and would like some opinions. I am thinking about moving my 4 DP21"s to the passenger side, and port on drivers side. Then the idea for 8 15"s started creeping into my head. The subs in each setup will be on 2k wrms each, so it's not really a fair comparison since it will be twice the power with the 15"s, but o well. The 8 15"s would be on bottom with the port across the top most likely. Some of the subs I have been considering for the 15"s are: BTL's, new DP's, Lvl 5's, and Exos. Right now I am leaning towards the Atmos Exos. Wall is in an 03 Expedition at the B-pillars, 40 cubes and will be tuned somewhere between 28 and 32hz. Prob…

i have an ascendant audio atlas 15 and a shocker sig 12 that i need recones for. who would i talk to to get recones for these subs?

Ok guys I got 2 10'' JL w0's (old ones), they beat pretty good in my truck (ext. cab sonoma), but it is time for bigger and better things. My buddy has 3 12'' JL w0's (also old ones) that I am buying, but 2 of them are 4ohm and the other is 8ohm. I have 2 amps to use. I'm not sure if I should run all 3 12's ( 8ohm on one amp and 2 4ohm on the other), or run the 2 4ohm 12's with my 2 4ohm 10's. Either way I will build a sealed enclosure with each one in its own chamber. I'm just open for suggestion. Got alot of stuff and don't know what to do, any help is appreciated. Thanks!

Here is the ssa 15" xcon in a infinite baffle setup, it is a temporary setup so it doesn't look nice, this was to just see how it would do in infinite baffle, to just let you know it is only getting roughly 200-250watts of power. Oh, and by the way, this inst the guy who actually uses this account, im the friend hes next door looking for mdf. video 1 - http://www.youtube.com/watch?v=JtWSgJyrHDU video 2 - http://www.youtube.com/watch?v=mOTSggsL7SU video 3 - Outside - were outside the house in this one.. not that interesting. and im the one talking, not the owner of this account. he told me to post em up here while he was outside. so again, this is just something we did in…

ok so i found these and they are well within my price range. are these eclipse 3 way component sets any good? anyone here that has used or heard them? they seem like a steal for a 3 way set. 6 1/2 eclipse 3 way set

Hey im a little stuck between thse two setups. Fi BL 15 w/ cooling in a 3.5cf tuned to 32hz after dis. or 3 sa-8s in a 2.5 tuned to 35 hz after dis. What i want from it is low hard hitting bass. I want it to get loud but retain some sq. Loud>sq though. In terms of powering it. It will be the same amp whether i get the BL or the 8s. 1500 watts. What it will go in? 2001 Mitsubishi Eclipse. Need any more details? Just ask. Thanks in advance.

Ok so here Im going to get Image dynamics XS-65 which consists of a 6.5inch woofer and a tweeter. Thats 2 way right? So if I plan on using it together with my 12inch subwoofer, would that make my setup a 3 way? I just read that for a "true" 3 way, you need a tweeter, a midrange (3 inch) and a woofer (5-6inch). So I was wrong the whole time? Then if you add a subwoofer, you actually have a 4-way system Also, from what I read is that what Im actually going to have (with the xs-65 components and my 12inch sub) is called a 2 way crossover + subwoofer and NOT 3 way? So this confuses me even more because.... if you get a 3 way component set, then how do you run them active? A .…

As far as I can tell most people are mentioning 300-400watts for the Dcons which is fine for my current amplifier setup. Question is, if I upgrade to a JL 500/1 would it be overkill for the Dcon? I know seeing the full 500watts is probably not going to happen, but I would like to know if the Dcon can handle 500watts daily. Like 4hrs a daily 5 days a week. Also starting looking at the Mach5 IXL subwoofers since I see that as a similar recommendation when people are mentioning the Dcons. Any experince with either subwoofer would be great. I love Image Dynamics but cannot find anyone local(plus I h8 the local guys) who would just simply order through their shop, and I know t…

So Im about to change my factory speakers to a 2-way component set. Right now, I will be running passive (HU->crossover from components->woofer/tweeter) but in the future, I plan on adding a Sundown 100.4D Will this be right? HU->Amplifier->Crossover from components->woofer/tweeter) Also, is this considered active? The reason why I ask is because I plan on buying Morel Hybrid Ovation II components, and the dealer Im getting it from told me they put a lot of work in the crossovers. At that price, I wouldn't like to put those crossovers in a box in the closet, but I wont use them if you guys tell me its better not to have them if there is an amplifier already…

is there anyway i can get 6 10's to fit on box thats 30x24 tried using the google sketch and stuff to make box and move around the circles and see but i cant use the program worth a crap lol can anyone help me out here

So I finally order a set of cheap comps to upgrade the crappy stock speakers. I'm wondering whats the best way to position them when you are so tall you pretty much sit in the back seat to drive? Right now I tend to hear the rear speakers more so then the fronts as I sit so far back. The front stage will be louder then the stocks running off the HU, so I think I might be ok. And advice from you other tall people? I'm 6'6" for inquiring minds. I was thinking maybe building pods just off the bottom corner of the door by my foot and firing the mid's towards the back more and possible putting the tweets on the pillars. Clueless right now. Goals are just to keep up with the su…

Hello. I am new here and looking for an answer to an easy question. I have a 2002 Civic and I am looking at a Q Logic Custom sub box. First, does anyone have any experience with those units. Second, the volume of the Q Logic enclosure is 0.65 cu. ft. The Fi Q I am looking at calls for 0.2-0.6 cu. ft. of volume, but it has a 0.12 cu. ft. displacement. Does this mean the Q Logic would work? The way I am calculating it is that 0.65-0.12=0.53 cu. ft. volume after installation. Thank you in advance for the help. Nick

I have one of these that's been sitting around for a really long time. I want to build a box for it but I don't remember how big of a box I need and what I should tune it at. I can't find any info on these much less anything about the company. Anybody have any idea?

I got 3k and 7 cubic feet before displacement to play with, what can I do to get a hairtrick? Budget is 600 dollars for just the subs. GO.

Assuming Both were ran in optimum ported enclosures, running off a SAZ-1500d @1ohms (i know way too much power, gain would be set correctly don't worry), which would you choose and why? Looking for more SPL than SQ, and this will be a daily beater setup. I'm looking between the upcoming sa-15 and 15" SSD w/BP power, I understand the sa-15 isn't out yet, but judging by the specs which would you prefer? Obviously the SSD is rated at 800rms vs 600rms for the SA, but it seems like the Sundown is very underrated... I think it would run at 800rms fine. So far the differences I can find is the 2.5"(SA) coil vs. 3"(SSD), the SSD has a slightly lower FS (29.6 vs 30.9) as well as …

anyone know the recomended ported box size or if you own one what size and frequency for tuning u use im thinkin maybe a khaotik enclosure but cant find box specs

I was hoping some of you guys could help me, I am looking for a couple of 12's and an amp for my truck The truck is an f-250 diesel, and I previously had 2 12's ported through the bed, and this is the way I'd like to go again so I can fill the big hole in the cab. I'm more concerned with sound quality than overall SPL. I like what I have read about the FI Q's, and am leaning towards those, but am open for other suggestions in the same price range. I am also looking for a low to mid priced amp to go with these subs. I am looking for a reliable combination that won't be pushing the subs on the ragged edge all the time. I don't think my installer performed any electrical …

Im wondering which to get. 2 Fi SSD 12s in its optimal enclosure or 2 Sundown Sa-12s in their optimal enclosure both will be running on the same amp. Im wondering which would get loud and retain sound quality while doing it. All ported by the way.

How are these subs and can they take more than rated DIYCable.com : Intro » Home » Exodus Subwoofers »

hey guys..i dont want to start another "which would be louder thread", so im not going to. But i was just wondering, comparing a DC Level four 12 to a DD 3512, would they be similar in terms of performance? Thanks again.

just got my 04 reconed re xxx and i noticed when ups dropped it off the box wasnt in great condition so i looked inside and the sub is fine except for a couple spots on the surround where it looks like it was chafing on the cardboard box, i can take a picture if you guys want but it is very unnoticeable and prob hard to see in a pic, it isnt gouged at all just some surface rub just wanna kno if this will become a problem

Hey guys havent been on in awhile but since then have decided to change my set up. Right now I am running a Lethal Injection 12 at 600wrms. I was thinking about using my amp to it's full potential and getting 3 sa-8. I have a SAX-1200D. Ok now on to my actual question. My wiring options are either 1.33333.... ohms or .5 ohms. Which ohm load would be better for my amp? I feel with the 1.3 ohm load the subs wont be seeing full power and I feel with the .5 ohm load I might ruin my amp. Any suggestions are greatly appreciated.

i am looking to get my system started and i am looking for a idea for a amp for 2 12inch xcons... please help... u can email me would be nice at [email protected] thanks for the help