Subwoofers / Speakers

alright. i have totalled up tha cost of four RF p3 15's and a SAZ-3000D and it is in the are of $1700-$2000. i want to knwo of course, if this setup gonna be any good? it will be in a honda crv tuned to about 26Hz and running @ .5ohm and i will set it to about 900-1000w a woofer. will this win me anything but a consolation prize? or will i b reigning champ? i only have enuf for the box for the 15's and the components. none for dynamat or stuff. dont want to do anything permanet to the car bcuz it aint mine, my friend is considering lettin me use his. thanks for any feedback.

Hey guys - I wanted to take just a second and say hi and tell you a little about me, Daber Audio, and planned future products. I'm an audio junkie, drag racing fan, father of two, married, guy from central Illinois. When I was a little kid (probably about two years old) my dad had an Pionner/Technics/Marantz home stereo set up. I loved to sit and watch the equalizer (digital display) and thought the lines moving up and down were stick people dancing. I then figured out there was a correloation between what sound was being played and which "stick people" danced. So there it began, the obsession. As I got a little older I started getting in to home hifi, then a natural prog…

I am Neal Tyson, head of Team Neal Tyson and I hope to be able to help you with all your audio needs.

how about dem subs

well i have decided that it is time for a switch up in the system. i curently have a RE sx 15", with a american bass 100.1, but the sx is being sold today. after reading many rave reviews and talking to sean (ibander on most fourms) i am pretty set in that i want to get the new mag. the only thing is if i want a 12 or a 15. my dilemma, i would like trunk space. but no big deal if i dont have any. ibander said that with too big a box none of the sound will make it into the cabin, i believe what he says being that he knows more than me and has more experience. i will probally just go with a 12" ported i dont really have a question, or a point. just wanted to say hi and yo…

ok so if a quad coil 1.4 ohm sub has a bad coil how do you wire it to cut that coil out? is this possible...

I just got a 2002 police interceptor for 2k and want to put a system in it. I listen only to rap and love deep clear bass; I want either a single 15 or dual 12's. I want to spend $1500 or less Should i get a single 15 or 2 12's? What brand should i get? What should i power it with? Why? I know i didnt provide a lot of information (i dont know what other info to provide) and this is all personal preference but any help is much appreciated. I don't know trunk dimensions at this point (car's in the shop)

Hey, Do any of you guys have any suggestions. I have broken three screws holding down my magnum 15 in one day. I put new ones in but the sub is rattling cause the screws arent keeping it down. What kind of screws should i am using 1 5/8 drywall screws. Suggestions?

I have a 2002 Chevy trailblazer, Boston acoustic 4 channel amp powering the b.a. interiors. I also have a kinetic hc800 to help power the jl1000v2 which is 1000rms. but i need some help choosing subs. i have a suv so the box size is virtually unlimited, i want something that hits rlly hard so i can have some bragging rights. i was thinkin maybe 2 15's but have no idea what kind i should get. money is not a factor i will spent what it takes to bump as hard as i can with 1000rms. HELP ME!!!!!

hey, i have a new magnum 15" in a 2.5 cube sealed box, my amp just blew up, i need a new one, any suggestions? price doesnt really matter, just name a good amp to go with a mag plz? thanks

I have a ssa 15" xcon in a 4.0CF box tuned to 29hz in the back of my wagon. Its hooked up to a hifonics 1610d amp which is rated at 1600rms at 1-ohm at 14.4v. I want any advice for adjusting this so my sub stops bottoming out on deep songs like bass i love you. I have tried the sub-bass filter but if i turn it up anymore those deep songs lose the deep bass that it can hit fine without bottoming out. its those notes below 25hz that bottom it out, but the sub-bass filter only has a 12db slope and it lets to much in. So what do I do? I don't want to wreck my xcon.

I've just bought a new Pioneer TS-W308D2 dual 2 ohm VC subwoofer. This is the first sub I'm building an enclosure for so I wanted to keep it simple the first time around and stick with a sealed box to keep things easy and relatively foolproof. I may go ported in the future but that's another build for another time. I have two different 2 channel amps (Kenwood KAC7204 ~500 RMS bridged 4 ohm for the subwoofer and an Earthquake T1000W/2 ~200 RMS x 2 channels 4 ohm for the 6.5" comps that I'm putting in the front doors (I'll keep the gains turned well down on the amp to the 6.5 comps). I've looked at the Pioneer manual for the sub and it has the following stats for a sealed…

So ive decided on my new driver set being a seas CA18RNX 7" and the H1189 tweet (27TDFC). with the advice of ///m5, im going to run the CA18 full range and just do a crossover for the H1189 until i can finish my active setup. well after looking at madisound, i came across a prefab xover for the tweet and another driver. http://www.madisound.com/catalog/product_i...roducts_id=8232 not wanting to spend an extra 60 bucks on xovers that i wont use very long, i decided to make my own. so far on my list are the 4.7μF SA Range Polypropylene Capacitors, eagle 4 and 20 ohm resistors, and 0.4mH 20AWG Air Core Inductor. im pretty sure theres nothing else i need except a board…

Im wanting to purchase new subs for my explorer once i get my tax return. i previously had 2 15" kicker L7s in a ported box power by a memphis mojo 2400 amp. id like to stick around paying a 1000.00 for subs/amp/head unit. maybe a little more. id still like to get 2 15's. i had the last sytem 4 years ago so ive been out of the loops on good sub/amp combos. could i get some recommendations please. im wanting to be very loud, not to worried about SQ either.

im looking for a new sub ive narrowed it down to the Fi SSD 10 w/ copper coil and then AA Arsenal i just cant decide between the two... what im going for is clear and detailed daily driver that can play lows its going to be run on a zapco 500.1 the arsenal matches my power exactly, but i hear the ssd is detailed and can play the lows very well... i just dont know make up my mind for me i would like to have the sub ordered within the upcoming week thnx!

I tried my hand at designing my ported box for the MAW 10 that will fit behind the seat of my RCSB truck. I have decided to go to 1ft^3 as it recomended to keep things comfrotable. According to my figures using the formula on JL Audio site I reached these figures. Port is a piece of 4" PVC. Box @ 1ft^3 28" port 33.08 Hz 27" port 33.63 Hz 26"=34.20 Hz 25"=34.81 Hz 24"=35.46 Hz Is this right and which one would should I go with for my purposes as a daily driver? And also what should I use as the displacement for the driver? Thanks for yalls help in advance, Aaron

Car is a 2004 Chrysler Crossfire, I'm gonna drop an FI Q 10" or 12" (prob 12") in the trunk powered by a Sundown SAX-1200D or if not then an Audioque 1200D. I need to upgrade the 6.5" speakers and tweeters in the doors and was looking for some feedback from people who have some experience with them. They will be powered by the stock 6-channel amplifier. I will be disconnecting the stock 6.5" sub woofers and I can (hopefully) bridge 4 channels into the 2 speakers and the remaining 2 channels will power the tweeters. Im aiming for a SQ setup. Also I will be putting in a Pioneer MVH-P7300 head unit. So with all that information which of these speakers is a good choice: …

Hi guys I need a good speaker I was recommended to Fi. So far with this kind of upgrade I'm goin to be upgradin the power and ground cable but right now I'm workin with (head unit - panasonic cq-c7401u, Amp - Alpine mrp-m1000, Box - Single 12' ported mtx Sledgehammer, Thinkin it's 1.8 to 2.0 cubic feet I'm not sure Havn't used box yet so I don't even know what it's gonna sound like) I do have a 1 Farad Rockford cap but I Havnt used cause It's pointless till I upgrade alt and big 3 which I have never done but will be doing first thing after I order speaker. Now my guy told me to check out the Fi Q 12'. I'm liking what I see but I'm not totally sure I know exactly How t…

I cooked the voice coil in one of my Aura 10 inch midbass drivers So now I need to replace them with something more heavy duty. http://www.madisound.com/catalog/PDF/aurasound/NS10-513-4A.pdf I know the t/s parameters should tell me which driver should be a good candidate but don't understand all of them to the fullest yet, SO this is where I am asking for help. The Drivers will be mounted in my doors IB and will be getting 300 watts RMS. They will be bandpassed 50hz to 400hz, give or take whatever it takes to blend them. Based on my installation I ASSUME that I need a driver with a total Q value of around .35? I ASSUME that because I burnt the voice coil in the Aura I s…

my car has stock 5.25" speakers in the doors and i really wanna KISS on the front stage, with a 2-way. of course i will be deadening and sealing my doors as much as possible, but right now, i dont wanna spend too much on the mids 70 per will probably be the max for me. I have the seas neo metal version sitting here next to me and a set of aa poly mids. the only problem i think will be the fact the stock grill will ONLY fit a 5.25 speaker and i don't want any bad reflections off the inside of the door panel. I wanna HP the mids over ideally around 80hz, but if i must go to 100 i must. For the amps, i will have an Usamps md42 bridged at 180x2 @ 4 ohms so power should…

Im having a hard time weeding thru everything to find the best of the best woofer for my application. It seems as if i get a different answer from everyplace... So ive decided to ask seperate questions and be more specific in my application goals (and poll as many peeps as possible). Box will be ported using 6" areos. I want a pair of 15s that can accuratly reproduce all bass (especially the lows) @ a 4 ohm load on my amp. At that power i want to be able to go to an sq comp and win. But i want to be able to take it down to 1 ohm and run like meade... subs must be able to handle the power at 1 ohm and sound as good as possible. Daily is where im mainly concerned with but i…

currently i have a Rockford Fosgate punch 501s amp and i want to find a 12 that will run great with that amp.. my amp specs are Bridged Into A 4-Ohm Load: 500 watts x 1 Per Channel Into A 2-Ohm Load: 250 watts x 2 Per Channel Into A 4-Ohm Load: 125 watts x 2 Any suggestions on a 12" that hits hard and clear?...i was looking at the decon 12" by ssa audio only problem is it only requiers 300wrms 4ohms or the sd-2 series by sundown 500wrms 4ohm but thats for shallower mounting depths and i want something that will slump... im open for any suggestions... i would be up for maybe a 15 if i have room for it. if their are better subs out their for my amp then those let me kno…

Hi all, I am looking to get a new subwoofer for my car. I have narrowed it down to the following based on reviews online..... All 12" speakers FiQ, Fi SSD, ICON, or maybe go with two DCONS or FiX's. I will have to get a box anyways, so one or two subs is an option. I have 1000watts @ 1ohm / 750 @ 2ohm to power the sub(s). I want something that will play tight, clean bass with a good kick but at the same time get a little loud if I want. Mainly rock music and hip hop, some jazz and classical. No country From past expierence I prefer the sound of sealed enclosures, however I would not rule out a ported enclosure if it doesnt get muddy or boomy. Oh, budget is around 300 f…

From a lot of help from many folks here at SSA, M5, jim, neon and acidburn come to mind(thanks dudes), I decided to go active. I ordered my pio 880 here from SSA because in the end, i've been helped here more and would rather give my hard earned dollars to this place when they are an option. I will be deadening the whole vehicle at some point and doing the doors when I start on the speakers, I cant even figure out how to pop the doors off on this vehicle, and as it's cold as chit I haven't spent anytime on it yet. Future plans also are to add a car-puter, and bass at some point I now need help again for going active with the drivers for the front stage. Right now I am …

HELP please WHich would be the best for the rear of my rsx...i want something that is clean sounding, has nice mid range presence (spl) and will give me crisp, accurate highs. I am currently looking at cyrstal csx615, infinity kappa 652,5i, polks db675, and image dynamics ctx6. I have cdt classic comps in front with silk tweets. Which speakers would suite my needs best as I do not have a store locally taht has any of the aforementioned speakers. Thanks