Incriminator Audio

Had it wired low as chit (<0.5ohm) and just cheeched it after a few runs on the term lab. Any info on repairs? Email was sent already with no response.

just want the enclosure specs ported for a 12" flatlyne in english mesurments

What line in the IA arsenal would have the best SQ?? Aslo how would it compare to a FI Q??

i will be picking up a sundown 3k or rockford t2500-1 bd. i was wondering if that will be to much for the death rows? or should i go with dp's ??

Any chance the Flatlyne 15s will come in Dual 1 or Dual 4 ohm any time in the near future?

Looking to build a box this weekend for a Death Row 18", 6.5 cuft, 90 inches of port area. Going to be a slot port, was wondering if it should be a 3" or 4" tall slot? Worried about wind noise (port noise) and tuning freq changing if the port is too narrow. Any advice? Should it really be bigger than 4" tall slot? Thanks!

ok well no feedback from my thread in the sub topics so im reposting similar in here, ive got four of the dp 21's and i need help on enclosure type and size, i like bass thats loud and low, i have an astro van so room isnt too big of an issue, 21's are new to me so i need all the help i can get, what would be better for my situation, 8 or 10 cubes per sub and what would be the best port size per cube and what should i tune it to, hopefully the people on this section have had the pleasure of experiencing the joys of hearing the 21's firsthand,also what would be the best box setup for all out loud walled by the b pillars, walled all the way to the back or in the back with t…

I have power limitations, just 400wrms via Soundtream Rubicon 400.1 CEA compliant. I friend of mine told me that with that power, is safer to tune the box 35hz. Thats the lowest he could go with the 187 due to the 2" vc. So I want to know how big the box could be for 1 12" 187 ported and the tuning.

video with more in the bag / song thug motivation 101 (no added bass)

OK i have 2 dp dual 2ohm 15's wired to 2ohm final resistance but now they have gotten quieter and i checked my resistance and it has risen to 3.5ohm any ideas on why this would happen

Hello, So I there are like 4 hours left in the black and blue sale and I have been biting my nails to the nub trying to decide if I want to pull the trigger on this or not. Incriminator Audio has only recently came onto my radar as an option for me and because of this I am a little weary of dropping 600 bucks on what is essentially a shot in the dark for me. Not to say they IA hasnt been around doing their thing for a long time, I just wasn't aware of them. So I come to the place I know I can get some well informed advice and information from some of the most valuable and experienced audiophiles I have ever dealt with. So let me lay things out to make it a little simpl…

I currently have an 18" IA Death Penalty and had it on a Hifonics Brutus 2100.1 and I now have a new vehicle and am looking to run two 15" IA Death Penalties, but was curious on what type of power they actually handle and what people have put to them and how well they take abuse. I was thinking about the BC5500 Crescendo amp @ 1 ohm on the two 15"s is that to much for them honestly? I have a 320 amp alternator, & extra batts. So my electrical is decent. 12v setup. Thanks for your input & time, if you can please show me a video of your setup to give me an idea on what type of power you do daily, thanks.

First of all, is the 40.1 still in production because I tried to find it on the website and it wasn't there. Secondly, can anyone ballpark what the 40.1 is rated at 0.5 ohms?

I have a Alphasonik PMA600HCA that is rated at 1800rms at 1ohm and I was wondering if one death row 12 would take the full power of my amp on a daily basis but I tend to turn everything down on the cd player unless I am showing off

Here is the current happening... Download the Dirt Sheet

I know this is a dumb question, ive never claimed to be smart. When it comes to subs ive always been a pay and play kinda guy. I want to learn more about car audio and how to do all of it. So ive recently started building sealed boxes. The three ive built turned out really good in my opinion. The problem I have now is, im building a box for myself and i want to port it. I have 2 LI 12's. Any advice anyone could or would give is greatly appreciated. The specs for an LI 12 is on average 2.00 cubes, 30 inches of port and tuned to 28-35. My question is, for 2, do i build the box at 4.00, 60 inches of port and tuned to 56-70 Ive never built a box to spec, but i want these to b…

Thanks Nick and IA/Bass Mekanik for the new cd. If it weren't for the rain I would be outside jamming, but so far it sounds good on my house stereo.

Who all is planning on going? Anyone going that will be running IA that I dont know about yet? If you are a fan of Incriminator Audio then you should come check this show out. IA plans on blowing it out for this show since its basically in our backyard.

The new site is going live in minutes - we are still working to add all the new drivers and content as needed. Please report anything that needs attention or if the site has an error. Thanks, Nick http://www.incriminatoraudio.com

my poor car Team I/a Team Stetsom .

This is in the latest edition of Performance Auto & Sound Magazine......and available online. Just thought those who don't see that magazine would like to check it out! PASMAG | PERFORMANCE AUTO AND SOUND - Incriminator Audio IA6.4 Amplifier

Maybe im just to lazy to look but whats the T/S of the DP 12's

Alright I'm a big mmats fan hence my screenname lol I'm looking to switch to IA and was wondering how a Death penalty would compare to a juggernaut? I have also considered the DC level 5s but not too sure. I want something that can get really F ing loud but sound good doing it. I plan to do at least 4 subs in my setup most likely 15s.The wardens look good too but I'm afraid of not being able to give enough power to them.Whats the suggest wattage for them I'm sure 3000 watts wouldn't be enough.