Incriminator Audio

My link

Hello IA Teams, I am planning to get a new sub woofer next month. I would like to try your DP 12" I would like to know if it is ok to put a 2000watts amplifier to it? with stock alternator 70A and a D3100 under my hood? ( I will replace the stock battery and no extra battery in my trunk) do you think that I will be facing a problem in the future or my current electrical setup will damage my equipment? Is it also possible that I put it in a 6th order bandpass tuned in series? I listen mostly to rap music and I don't have any plans in competing. I will put it in a trunk, because I have read an article that one characteristic of bandpass is that bass sound will easily travel…

Ok I am thinking about purchasing two DP 15's but don't know exactly which coil config. I should go with. Will the amp be strong enough for these at 1 ohm or should I get dual 2's and run the amp at .5? Thanks in advance for the help... Oh, btw, this is for a daily application that will be tuned to 30hz.

Curious as to who owned a Death Penalty and how hey worked for you....ive been eyeing them a lot lately.... :rockwoot:

I always hated when people made these threads but I honestly don't know where to start asking besides here. I am either going to buy 2 21" DPs or I will recone my BTL 18s into 21" dps, I just wanted to know if this could be done and how much it would be? I'm trying to figure out if it would be beneficial for me to just sell them and use the money to buy new 21s, or if I could save a bit and re-use the perfectly good motors (actually the entire sub is in perfect working condition). Please let me know if it can be done, and the pros/cons if possible. Thanks in advance for any help I can get!

I want to do round ports on this next box but I am running into problems of how many I can fit. My numbers look about like this, 17.4 cu ft after all displacements 3 10" round ports 18 or 18.5 (can't remember exact) which is ported right around 35 hz. My main consern is will 3 10" ports be enogh port? Thanks for the help

I just got my death row's hooked up and running figured I would start a thread and share some photos and answer any questions about the new DR. System consists of a IA 20.1/ 2 DR 12's/ Cheap JVC head unit (lol to broke to upgrade at the moment) my friend custom built a ported box tuned to 32hz not sure on the dimensions but I can get em. Door speakers are 3 way fusion battery is a 3400d with a 220 mechman alternator. I'll have some photos and videos up probably starting monday. So far my first impressions are great. The sound quality is outstanding with zero distortion even with my radio turned all the way up. My whole ride shakes and flexes (which I plan on getting m…

this weekend DjMan ( Doug ) lent me 1 of his Ia 40.1 so i would not have to use the Massive POS !!! we wired the 2x 15: SoundStream subs to 0.4 ohm no where near the 0.26 his DD 9515's will do... using 1 amp on a 12v setup did a 154.6db amp never even got warm. i was wareing hearing protection and it was blurrrrrrrrrrrrrrrrrrrrrrrrrrrrrrring my vision

It was nice to Meet you Nick and David @ Finals. Sorry the truck didnt hold up for a big #. Live and learn on my end. Atleast David got a demo of the truck before i had more problems. David, you are like a Robot when you recone woofers bro. I will be getting ahold of you guys shortly for recones. Here is a pic of 2 of the coils .. NOTE NOTE, these are my fault, Very effecient 6th order but it would not allow the woofers to cool as needed. Doubling the power did not help much except add alot of un wanted heat. The 2nd pic was reading 304 ohms.. LOL Before everything let go, I was street beating a 156.7 Live in learn, new enclosure design to come. Also, new shirt…

I have been looking into the FI BL with the cooling option for a while now and was wondering which IA sub would compare to it?

Here you go guys: https://www.youtube.com/watch?v=R3BF0JW-5eA

Here is a little install that Nick and I did today for his cousin.....Haven't had it metered, but by ear its in the upper 140's at a pretty low note (box is tuned to 32hz).

i need 2 12s for a sealed box. about 1.3-1.4 per side. how will the LI 12's do in this setup? 500watts a piece for now. im also looking into RE SEs. I have idqv3's now and they dont get loud enough or low enough. but i have to stay sealed the box is behind the rear seat of my crew cab. thanks.

I was wondering if you guys though a DP21 would be logical for a daily sub for all types of music. I'm thinking either that or maybe 2 DP12s I'm not sure yet. I'd like to get REDICULOUSLY loud, like 150s + where i don't want to be in the car. But also be able to turn down the sub and use it for regular music too. what u guys think?

I am doing a design for someone and one of the designs i am making needs to be angled in a clamshell and i need to know the width of the magnet so i know whether or not the magnet is gonna be touching the box or not in the blueprints. As of right now, the depth is 11 59\64th at a 12.9 degree angle... I know that isn't good enough but once i have the magnet width, i can input that into the design so i can get the right angle and height for the equation i have.

So, I've had the sub for a little while now, and thought I'd post some pics, scores, and some thoughts. In the enclosure, built by thegreatestpenn, 3.0 net tuned to 30 hertz: The first time on the meter, at the headrest with the A/C on blast: The first time on the TL, I didn't get a pic of my dash score, but it was a 138.4. The second time, with the air off: On music (Flo Rida's Sugar): Trunk class results at the 1st show I went to: Now for thoughts/impressions/comments. First things first, it is really, REALLY, REALLLLLLLY efficient. I'm only giving it about 500-600 watts, judging by my voltage drops. To be doing that kind of score off such little power makes me…

Does anybody know where I can find an outer mounting ring for my 21? The best I could find is the foam cushion type that you find on walmart subs. Any help would be appreciated.

I have a gmc single cab ruck. I already have a bed cover and am planning on doing a full blow through (cutting out everything under the back glass) and replacing the back glass with lexan. My problem is that I want to run two dp 21's on a 40.1 but I don't think I will have enough room to run the two subs and the port into the cab. So my decision is probably gonna be between 2 21's with the port somewhere in the bed or 2 18's with the port blowing into the cab. Which of these setups would be the loudest for daily spl? If anyone has any ideas on another way to do this I am open to suggestions. Thanx in advance.

Congrats to Tommy for another victory with a 159.2 in the 150-159.9 class. Here is the video of the run against Bob! [url="http://s96.photobucket.com/albums/l164/dmz2711/?action=view

Come be our friend www.myspace.com/incriminatoraudio

anybody have a dust cover blow up on em? went to blast it today and i noticed a bad clicking noise comming from the back and then i looked and the dust was still there just blown apart. any fix to it? super glue?

I will be flying back to the states from Kuwait in two days and if some one could help me out and show me what I need to do that would be great. I will be in Charlotte, NC area for about 21 days. I would like to start putting my truck together when I get back to Kuwait. I am willing to travel to see as many set ups as I can. Please help thanks for your time charles Right now I have 2 TC Sound 18' Ultra LMS with a 200 amp alternator one red top batt one 1400 kinetik and one IA40.1. I

Rearview hates me Young Jeezy- Hypnotize Outkast- Speakerboxxx Intro. Camera sounds like shit on this one. Don't know why but it sounds much, MUCH better in person.