Incriminator Audio

I am currently sub-shopping for my birthday (early July), and have my eyes set on a pair of 187's. I have a few questions. 1. Is a port tuned to 45hz too high? I have zero experience with box building and found a fairly cheap prefab tuned to such (lol don't bash me too much) 2. Can these take 500rms daily? 3. I was gonna buy mine off of some site called Vertex.com, I was wondering if anybody had any experience with them? 4. I had my heart set on two RF P3's (lol again, don't bash me too much). I noticed they have a larger voice coil than 187's. Should this be a concern? 5. Last one, I promise. How toughly built are these subs? Cuz I live in Texas and it gets HOT, and I do…

Since this hasnet been posted here yet. Seen it on their FB page

just want the enclosure specs ported for a 12" flatlyne in english mesurments

who is coming to the show?????

I saw in the recommended thread it says: closed 28.3 - 39.6 liter This converted to cubic feet is 1-1.4 cubic feet. The displacement of the driver is .13 cubic feet. Does the recommended capacity include the displacement or I need an additional 1-1.4 cubic feet resulting in 1.13-1.53? Also, do you have any recommendations on where to buy said enclosure?

Everyone please join us if you haven't already....tell your friends. www.myspace.com/incriminatoraudio Incompatible Browser | Facebook

Ok, so right now I'm running 2 20.1's strapped at 1.5dcr daily and burping at .375dcr. This is on 2 DD3515's w/ 3 Deka 9a31's. I'm pulling my current box out tomorrow (was doing 53's). Will be rebuilding and going w/ a smaller box. The 20's are doing good, but I can't help but think...would a 40 do better? I have never played w/ a 40.1, so I have no idea what they are really like. So, what do you say?

i have a DP21 and for daily iam goin to use like 2300Wrms from a Hertz amp ....but iam goin to go on some comps and with another amp 3000W + .... so i would like to know how many dBs did >> you<< DP users got on a TL >>> that means bassrace or just burps ....and with a single DP !! btw. which size ,how much power and tuning

Ok, I have designed a box for both subs which I will be making my purchase today and I'm wondering which is the better route to go. The biggest I can go in my trunk is a box that is 2.50 @ 34hz gross after displacements. it measures 17h x 31w x 17d with the port are being 43.5(17.68 per cuft). I'm running a DB Drive amp, which I found where someone clamped them at 2300 @ 1 ohm. Which sub should I go with? DP 12 or DR 15? The box size is .25 cuft smaller than minimum for the DR 15. and exactly at average for the DP 12. I'd hate to lose the cone area going with the 12, but it would take more power. It's looking like to me that the DR is the way to go, thoughts?

Yeah did another video with the new headunit, you will see how you can adjust the angle on the radio. I absolutely love this radio, was going to sell it but JBLCAMRY gave me some pointers, and opened my eyes lol. Not bad for a single 12" sub, might have BJ build me another box, but something more complex, either way I am completely satisfied. Pushes a good amount of air for a crx style box, and gets pretty damn loud, but sounding good at the same time. Enjoy!! Please comment

Is there any real differance between the two? Pros and cons of the two?

The install is not 100% done yet but here's a few quick pics. I have some better ones when it's all cleaned up.

ok well no feedback from my thread in the sub topics so im reposting similar in here, ive got four of the dp 21's and i need help on enclosure type and size, i like bass thats loud and low, i have an astro van so room isnt too big of an issue, 21's are new to me so i need all the help i can get, what would be better for my situation, 8 or 10 cubes per sub and what would be the best port size per cube and what should i tune it to, hopefully the people on this section have had the pleasure of experiencing the joys of hearing the 21's firsthand,also what would be the best box setup for all out loud walled by the b pillars, walled all the way to the back or in the back with t…

Any rumors on the release date of the 18" Death Penalty? Also, any rumors on a pre-order? Many thanks, Matt

I've called IA a few times everyday since Monday and havent reached anyone yet. I left a message today and monday i think but havent been contacted back. I also sent an email to sales on Monday and to nick today. I understand they're probably really busy so Im just being patient as i can be but im excited to get them ordered. Im trying to order some lethal injections and just have a few questions. Thanks in advance for any help.

Curious as to who owned a Death Penalty and how hey worked for you....ive been eyeing them a lot lately.... :rockwoot:

video with more in the bag / song thug motivation 101 (no added bass)

Well, I think I have ample time into this sub now, and I've been promising this review, so here it goes. First off, car and other equipment. Car is a Dodge Neon ES, headunit is a Sony GT330, front speakers are Powerbass 2xl-6.5's powered off the h/u, the sub is powered off of a Kicker KX400.1 at 2 ohm in 2.0 net sealed. Crossed at 90 hertz @ 12db per octave (only to help the coax's until I can amp them). Pics are in the other thread, for those interested. First thing I noticed listening to this sub is it's louder than my old Comp, which it should be, I'm giving it over 2x the power. Second thing I noticed is it really likes lower material, like sub-40 hertz region. …

Hey If I can get you guys coil specs would I be able to get a shocker sig recone with IA DP soft parts and basket?

Just to let you all know. We just changed the front page on the website to show what all happened at SBN. It's about 90% done now, and at some point in the next day or two I will format it even more. Check that out.... Expect details either Monday or Tuesday about the Warden release. My sources say maybe even as close as a week on it. It should be the show stopper! Posters are still shipping..... We still have shirts in XL and I'm about to get another load in soon. Any special sizes? Thanks, Nick

Burped for fun at a 2x show in Alachua Florida and was pleasantly surprised

I wanted to know where I could find two of the DP21 motor and basket assemblies and what would be the price of them be? Working on a project and I know you guys can help me out.

Do Flatlyne motors have any shorting rings in them? What is the stock coil ww?

I have power limitations, just 400wrms via Soundtream Rubicon 400.1 CEA compliant. I friend of mine told me that with that power, is safer to tune the box 35hz. Thats the lowest he could go with the 187 due to the 2" vc. So I want to know how big the box could be for 1 12" 187 ported and the tuning.

Right now i have just a hair over 3 cubes to work with for 3 187 10's.... i have done them in this amount of volume ported and wasnt real happy with low end. has anyone had experience with these sealed?