Incriminator Audio

i have a pair of 12" death rows.. and space is getting kinda tight if i have to account for a big slot port. so i was wondering if a pair (2) of 4 inch aero ports would be sufficent, or would i be better off just using 1 sub and keeping the port size up.. thanks in advance.

I have 2 12" 187's from incriminator audio in a custom built 4.4 ft^3 box tuned to 31hz powered by a sundown saz-1000D and on some songs the bass just is not there on the low end. The song in question is hypnotize by jeezy. I never really noticed the problem until my friend played the song on his infinity's in a prefabed box and it sounded so much better. Ok the problem is when the song begins there is not a lot of bass. I can feel it a bit but it is not too audible, and when the higher frequency note hits it is so loud. But that is really the only note i can hear well. My subs barely move during the parts in question. the part i have a problem with is from :27 to :40, …

It wasnt but me and a few sq guys at Meca finals. does anyone know who did what at Drag finals??

Yesterday ,I won DB4 at Meca world finals with a 127.9 db using 4 18's no wall and only 2 old school IA 20.1's on 12 v system.

It was nice to Meet you Nick and David @ Finals. Sorry the truck didnt hold up for a big #. Live and learn on my end. Atleast David got a demo of the truck before i had more problems. David, you are like a Robot when you recone woofers bro. I will be getting ahold of you guys shortly for recones. Here is a pic of 2 of the coils .. NOTE NOTE, these are my fault, Very effecient 6th order but it would not allow the woofers to cool as needed. Doubling the power did not help much except add alot of un wanted heat. The 2nd pic was reading 304 ohms.. LOL Before everything let go, I was street beating a 156.7 Live in learn, new enclosure design to come. Also, new shirt…

Hi guys. I have the above amp and have blown the power supply. The problem is we need to rebuild the power supply but because it blew pretty badly, I cant identify the values so just wondered if any one could help me out with a diagram or a nice detailed close up picture of the power suppy side so I can repair it. I have looked hard on the net but cant find one. I really want to save the amp and not have to buy another one so if any one can help, then please do. Also, Im located in the UK so there is no chance of me sending it back to the US for repair as I can get it done here or I would have if I lived in the US. Thanx

Vid's from 1st place win at Hoop's with pulse car audio just a lil fun with the warden's

Looking to build a box this weekend for a Death Row 18", 6.5 cuft, 90 inches of port area. Going to be a slot port, was wondering if it should be a 3" or 4" tall slot? Worried about wind noise (port noise) and tuning freq changing if the port is too narrow. Any advice? Should it really be bigger than 4" tall slot? Thanks!

I am doing a design for someone and one of the designs i am making needs to be angled in a clamshell and i need to know the width of the magnet so i know whether or not the magnet is gonna be touching the box or not in the blueprints. As of right now, the depth is 11 59\64th at a 12.9 degree angle... I know that isn't good enough but once i have the magnet width, i can input that into the design so i can get the right angle and height for the equation i have.

I see enclosure recs for all the subs except the one I'm interested in... the Faltlyne 15". What's smallest to largest sealed?

That is all...

We will be closed Thursday (Oct 1st) - Monday (Oct 5th). We will reopen Tuesday (Oct 6th). If you need help or have asked questions or sent emails please be patient! We will return to you soon. If your in the area of Tulsa, OK - drop by and I, Josh, or the gang can help you face to face....... For all the competitors - We will have recones for all the big guns - DP and Warden 12 - 21. Thanks, Nick

Just a heads up - Expect a delay if you've ordered any products recently - we've had a lot of bad weather the last 2 days. This has caused us to have no phone, no internet, and no power. Expect all to be back to normal Monday!

Hello IA Teams, I am planning to get a new sub woofer next month. I would like to try your DP 12" I would like to know if it is ok to put a 2000watts amplifier to it? with stock alternator 70A and a D3100 under my hood? ( I will replace the stock battery and no extra battery in my trunk) do you think that I will be facing a problem in the future or my current electrical setup will damage my equipment? Is it also possible that I put it in a 6th order bandpass tuned in series? I listen mostly to rap music and I don't have any plans in competing. I will put it in a trunk, because I have read an article that one characteristic of bandpass is that bass sound will easily travel…

OK i have 2 dp dual 2ohm 15's wired to 2ohm final resistance but now they have gotten quieter and i checked my resistance and it has risen to 3.5ohm any ideas on why this would happen

hy guys...in your opinion...what do you think,the Warden from specs and motor point of view is in the same spl class woofers with the DDz...so i would like to know for example...can a 18" warden keep up with the DD 9918z in a spl comp???

dB Drag / USACi - Unified World Finals is this weekend - just wanted to invite everyone to the show. Drop by the booth and check out Kendra - get a poster, see Ho Problems and the KOB, check out the Warden, 20.1, 6.4, Death Penalty 21's! Show starts Saturday at 10:00 am......

stay tuned.

Just curious if you will be going to the Db Drag/ USACI Finals or Meca Finals

My wife told me about facebook, so I got on and look who I found: Incriminator Audio

so i planned on turning my smoked dp 15 into 10", only once i tore in to it i have an older 08 model with the ia basket holes only (2 sets- 12 and 15, 18 and 21) cant fit a 12 spoke or a aq,dd,ab basket my question is, will the dr or li 10" baskets bolt up to a dp motor?

Can't seem to find any info on what people are finding to be optimal for the new DP 15's. I will be running one off of 1500 W and listening to mostly rap. Figuring 4 cubes after all displacements tuned to 32 hz. How much port area should I use? (3) 4" aeros (2) 6" aeros (1) 50 sq. inch normal slot port Thanks for any insite.

BEFORE.. After 16v setup now but couldn't compete at state finals sub decided to go out on me after testing the night before

Can you please help here is my box dimensions Box width:51 Box height:21 Top box depth:21 Bottom box depth:21 Wood thickness: 0.75 i want and tuned to 34 to 30hz not sure which what do you guys think need to know soon got a guy designing me a box i told him 34 but want these to hit hard do you think 30 or 32 is better

Nick/Josh, I had a question about the 187 15" with use of a passive radiator, the radiator in question being the Exodus Audio PR15. What volume enclosure would I want to use with the passive? If it's close to the current box I have (2.2 before displacement), what would I want to tune the radiator to? I'm asking because I would LOVE to have another 187, but without a better electrical, that's not going to happen and with a PR, I can keep my trunk and still gain the output of a similar ported box. Thanks in advance, Kef