Incriminator Audio

Hello, So I there are like 4 hours left in the black and blue sale and I have been biting my nails to the nub trying to decide if I want to pull the trigger on this or not. Incriminator Audio has only recently came onto my radar as an option for me and because of this I am a little weary of dropping 600 bucks on what is essentially a shot in the dark for me. Not to say they IA hasnt been around doing their thing for a long time, I just wasn't aware of them. So I come to the place I know I can get some well informed advice and information from some of the most valuable and experienced audiophiles I have ever dealt with. So let me lay things out to make it a little simpl…

Just got an email back, here is what i got for the 15" LI Driver---15 Inch FS --- 27 Hz Re --- 8 ohm series Qms---5.03 Qes ---0.67 Qts ----0.59 Mms ----205 g Cms ---0.15 mm/N Sd ----810 cm^2 Vas ----137 L Spl ----87.6 BL -----15.5 X-max ------21mm Sub Diameter------- 15 1/2 inches Mounting ---------14 1/8 inches Mounting Dept -------- 8 inches Driver Displacement ------ .15 cubic ft. Power ----------- 600 Wrms / 1200 peak Should help with some better box design I hope, I'm gonna run some numbers today.

can someone please tell me what these cost? i always just see the price or $959 but never saw anyone post the real price..

Does the IA20.1 do more than rated power?

How much are the IA20.1 and the IA40.1? Where to buy from?

we just got the 20.1 install in a 08 tahoe sunday with stock alt and a second batt. today the ia shut off with just 30min of playing mediocre loud. the arc ks is still playing but no bass. the volt meter show around 14v +/- 2v.

what kind of power you guys getting out of them at .5 ohms 14.4 volts ?

On the IA6.4, if you leave the crossover selector to "full" does that mean you can set the low pass at a certain frequency, and the high pass at a certain frequency? or do the HPF and LPF adjusters not work when its set to play full range? so example if i wanted a set of mids set to play 100hz to 5000hz, i could put the thing on full, then put the lpf to 100 and the hpf to 5k? (just an example)

OK i have 2 dp dual 2ohm 15's wired to 2ohm final resistance but now they have gotten quieter and i checked my resistance and it has risen to 3.5ohm any ideas on why this would happen

I'm curious what is the voltage right after the smps, on a 12.5v supply and the amp just idling. This IS relevant for me

i just ordered my 18" death row! ive been waiting to order it for about a month now. i sold my other sub and it just hasnt been the same without bass lol.

hello everybody, i just got a 3000gt hatchback and i need a know what would the best setup for a setup sealed box b/c space is limited so i need to know will 2 i12s or the 15 lethal injection sealed sound the best in my car? looking to push 1000-1200 watts with the subs facing the hatch glass.

which finals location(s) does incriminator plan to attend? is there any extra support or tips for competitors using IA equipment? I am attending Indy finals, running SS1-2NW with 2 DD 9515s and a single 40.1 so i am going to get killed in my class since i will have much less equipment than everyone else in the class. looking for all the help i can get

Does anyone know where to get the T/S specs for IA subs? they aren't listed in the SSA shop or on the IA website (talking specifically about the lethal injection series

Hey IA, I picked up the 187's today that you shipped to Indy, well packed, super clean looking sub. solid as hell. They carry your products, but perhaps have not played with them mutch. They were all over the 187 and said they ordered the Dp21"s , some real cool guys there at Sinister Auto Sports. Bear will be dropping the Cougar off tommorow for me to finish trunk. cant wait to get them in and give it a listen!

Hi guys, I have 2 IA Sub. One Lethal Injection and a Death Row Series. I am trying to build a new enclosure for my Death Row Series. However, I can't seem to find the T/S Parameters for this sub. I badly need them for my enclosure design. The website does not have this info. Can any of you guys help me on this? I would really appreciate it. Thanks.

The 187 is Incriminator's entry level sub. This particular sub is the 12" model, Dual 4 ohms. As with all Incriminator Audio subs, these sit a little lower. Actual readings were 3.6 ohms, the reason they do that is to help fight box rise. This sub features a 2" aluminum voice coil, double stacked motor, and weighs in at 14.8lbs. This sub is rated "conservatively" at 300rms. I am currently feeding double that daily to mine, and it does not even get warm. This is hands down the beefiest entry level sub I have ever seen!

Here is a few vids of my Impala walled with 2 18's powered by a single IA 40.1. stock alt, 3 runs of pos, 3 runs of neg, 2 C&D 134 AH batts DC Power alt should be here in the next week or so 13 cube wall with 175 sq inches of port tuned to ??32-34 hz lol. not real sure on the tuning cause i wasn't real sure on the exact size of the wall....it hits the lows hard though

I'm looking for a windshield decal and stickers, do y'all sell them? Thanks

hello from Slovenia u guys Yeah, I'm a new member and i know I should used the SEARCH button, but I'm kinda in a hurry... ... so could please someone tell me the correct box enclosure for the DP? i was thinking of about 9.4 cubic feet tuned to about 36Hz. what kind of port area should i make, 150square inches, more, less? and it's going to run on about 2-2.3kw power! thanks for the answers! Lp Kuky

Contest Rules 1. No purchase necessary. 2. Must be 18 years of age to enter. 3. Only one entry per person. 4. Must be a legal United States resident living in the lower 48 states. 5. Employees of Incriminator Audio, XS Power, and Mechman Alternators, advertising and promotion agencies, web site providers or other parties involved in any aspect with the creation, production, operation, execution and fulfillment of the Contest and the immediate family members (parents, siblings, children and spouse) and/or those living in the same household (whether or not related) of each are not eligible to win. 6. Video submission must be of original content, and 2-5 minutes in length. 7…

I just feel that Incriminator Audio deserves some feedback on my recent purchase. On March 4th i sent Nick a payment around 8 am for 4-18" DP recones (that had to be built) and a used DP motor. On March 8th, Those MOFOs were already on my front porch!!! A+ customer service right there guys!!!

well for the 99 bucks is that just for one speaker or the set? i know sounds dumb but just wanted to know

Hello, Would like to say S.Deyoung is a great guy and process of ordering from him was very easy and would recommend to anybody. I order the speakers from him and received them in a very short manner along with some adapters from Car-Speaker-Adapters. Okay, backround information, I drive this And I work here, And this is how much it cost to fill up from E, Lol okay, onward with the install. I will start off by showing step by step pics of the door panel removal procedure and then will post a thorough procedure on ExplorerForum. Okay, again, sorry if I'm taking up too much space, but I hopefully somebody could benefit from seeing the process I took as th…

Hi guys. I have the above amp and have blown the power supply. The problem is we need to rebuild the power supply but because it blew pretty badly, I cant identify the values so just wondered if any one could help me out with a diagram or a nice detailed close up picture of the power suppy side so I can repair it. I have looked hard on the net but cant find one. I really want to save the amp and not have to buy another one so if any one can help, then please do. Also, Im located in the UK so there is no chance of me sending it back to the US for repair as I can get it done here or I would have if I lived in the US. Thanx