Incriminator Audio

I have four 187 10" subwoofers for sale if anyone is interested. Have tried every other way to try and sell them. Thought i might get some feedback from and actual IA forum. No low ball offers please but will accept reasonable offers. Thanks for your time everyone

In a couple of months im gettin a couple of DP 21s. my port will be the width of the box, and as i was desiging i noticed that the braces will have to run in front of the port and i dont want that to mess up my deeeebeeeeezzzz so i thought if i double up all the way around and brace the port would that surfice? thanks for reading!!

ok so im i finally have the amps and the alt and a few batteries so its time to start the build,my only problem is i have limited port area, i wanted to do 9 cubic foot per sub(36ft3 after sub and port displacement) with port at 16sqin per cube which comes out to 576in2 port, upon measuring i found that my maximum port area can only be 477in2 which is almost 15in2 per cube at 8ft3 per sub(32ft3 in total before the displacement. so really what im wondering is would i be better off to just do subs up and port backwith virtually all the room i need or go ahead with a slightly smaller wall than what i wanted, oh im tuning it to 32hz so if that helps either position better tha…

So Im a hardcore IA customer considering I have and will not get rid of 4 40.1s. I came across a warden motor and was wondering where/who can I buy an 18" warden basket.

Guy wants me to build him a box but if i build the one he really wants, he'll never get it in the trunk. So is 3.75^3@35 htz with 3 4" Aero's too small for a pair of 12" LI's to do well in?

HEY EVERYONE, USACI TRIPLE POINT EVENT LAS VEGAS DEC. 6TH.. CAR TRUCK AND BIKE SHOW for the salvation army angel tree program.. whatcha think? can i get some IA crew support?

I was on the ssa store page and clicked onto lethal injections and i says no product available.Is this just temporary because its out of stock or are you guys doing somthing new with the line?

Incriminator Audio, LLC is proud to announce the addition of Powermaster

wondering the best place to get a 40.1 repaired, it was randomly going into protect for a little while, i tried to make sure all connections were clean and no wires were crossed and as far as i could tell all was ok(its in a hard to get to spot) well the other day it was pretty much stuck in protect so i shut off the sub out on my head til i could get somewhere to disconnect the remote turn on, guess i waited too long cause it smoked, whole car stinks.... so i need to know if u have a recommended repair person or should i take it to a shop in town that has repaired other amps of mine in the past. this was depressing. when it warms up a little i will pull it out and see if…

I have a 2007 Ram QC and the box going under the seat is .5ft^3 and I have 300 watts at 2ohms. So that all being said is this the right sub woofer? I know personal taste blah blah blah but I just want to know spec wise.

what kind of power you guys getting out of them at .5 ohms 14.4 volts ?

i got a IA DR 12 D1 and a sundown SAE 1200D running at 2 ohms it will put out 600 rms i was wondering if it should see more power to really get it poundin tell me what you think. (enclosure is 2.5 cubes ported to 32 hz).

Ok, so right now I'm running 2 20.1's strapped at 1.5dcr daily and burping at .375dcr. This is on 2 DD3515's w/ 3 Deka 9a31's. I'm pulling my current box out tomorrow (was doing 53's). Will be rebuilding and going w/ a smaller box. The 20's are doing good, but I can't help but think...would a 40 do better? I have never played w/ a 40.1, so I have no idea what they are really like. So, what do you say?

My 6.4 decided to stop working. No lights or anything. Getting power ground and remote output. Anyone had this issue? It's not mounted anywhere that would have vibration.

I have the chance to possibly pick up a pair of 21" DP's in trade for my XXX-6500D and was wondering if it would be worth doing. I got an Astro not too long ago and planned a pair of 18"s with the 6500D but then this offer came along. The 21"s need reconed, but the amp is 7/10 cosmetic and 10/10 mechanical and just clamped 4589 @ 1ohm on 13.8V during the competition saturday. I was looking around on you tube and what not at flex videos and dB numbers and am very unimpressed so far! Thinking may be I should keep the 6500D and run a single 18" on it instead? something like an RD HeavyWeight 18" to be more specific. Otherwse I would prbably run the 21"s on 1500~ each. …

Does anyone know where to get the T/S specs for IA subs? they aren't listed in the SSA shop or on the IA website (talking specifically about the lethal injection series

Does the IA20.1 do more than rated power?

was just wondering what the total shipping weight is on 1 of these things. i want to try to get it shipped usps as it is all i can receive.

Hoping to find a 21" basket and cone/surround for a frankensub I am looking to build, I was wondering what you had to bolt to a treo motor with a 4" coil, 6 on 5" bolt pattern, and what it would run me? I really wanted to go 22" but there just arent any parts available right now. Thanks for your time guys! Hope you have a warm and safe Christmas!

im gonna be picking up a pair of the 187 10's to mess aroudn with and i was wonder what size box they like? and tuned to what. i was gonna try like tunning low 30's like i always do.

Hey all. I am quite new to the world of car audio and its already completely addicting. I found my way to this forum/site thanks to the guys at caraudio. They recommended a 187 series Sub. I plan on ordering a 10 or 12 incher for my new system. I'm running a 5350A Reference amp from infinity. I have 300RMS at 2ohms. Can anyone suggest which would be better, a 10 or 12? Thank you very much. The reason im getting a 187 is i only have around 100 bucks to spend. I just want to make sure, that I have enough power for the sub. I know from what I have read that I will get some great sound if done right. I also want to make sure My enclosure is right. With my power, should it be…

Thanks to all the new info and pics of the entire Inciminator line, all the specs and pricing are up on the shop. http://www.soundsolutionsaudio.com/zencart...&cPath=2_20

http://www.mecacaraudio.com/flyers/3-12-11TN.pdf

Anyone running their lethal injections sealed? If so how do they perform?