Incriminator Audio

First off, I'd like to say Happy Holidays and Merry Christmas to all of you out there. I hope things are well for you and you are truely blessed! Today is our last day at the shop before Christmas as UPS last pickup is today. So we will be off the 24th-26th, then we will be back Monday (29th) and Tuesday (30th) and then closed the 31st - 2nd for New Years! Then we will reopen Monday (5th) - Tuesday (6th), then be closed the 7th - 13th for CES and reopen Wednesday the 14th and we will be back on schedule then. Am I the only once confused on this is as well? Overview: Mon- December 22nd - Open Tue - December 23rd - Open Wed - December 24th - Closed - Xmas Thu - December 25t…

Hello, I have 2 21" Wardens fresh out the box but with no amps. I thinking 2 saz-3500d's for these beasts but what would you think? maybe 4500d's or would that be to powerful? my goals are to make them hit as hard as they can with out damaging them and prevent clipping. my setup is poineer double din, 8 6.5 rockford T265's mids and 10 rockford aluminum tweeters for highs. under the hood i got 1 yellow top- 2 iraggi 350 amp alt. , in the back i got 3 kinetik hc3800's and my electrical is the big 3 upgrade with all stringer wires. and all this is in an 2006 escalade. sry i dnt have pics im at work right now. but what amps would you run with that setup if it was you?

Am trying to find out if a box that is 3.75 cu.ft net vol. with 64.5 sq.in of port be to small for this sub. I was considering buying a DP over a DR and needed to know. If it is them ill go with a DR in the same box. Am looking for mostly authoritive low-end bass, the box will be tuned to 30~32 Hz. How does this sound for what am looking for? Any input will be helpful. Thanks

4 DP 18's vs. 2 FI 18's & 2 Audioque 15's This is something about 20 people are doing in Middle TN just to have some fun. This video shows Lance Wayne vs. Richard Wojcik. Check out the YouTube channel for more details.

Been eyeing the new LIs for a while now and am trying to figure if i can make it work. Looking at getting 2 10s and running them ported. What is the ideal enclosure size for running 2 10s? Thanks.

Just curious if you will be going to the Db Drag/ USACI Finals or Meca Finals

I'm curious to know what numbers anyone is doing with them. Doesnt matter what type of vehicle!!

so i pulled my dp yesterday, and to my surprise when i set it on top of the box none of the screws or the driver pulled over to the motor. usually this happens, so i put a few on the side of the motor, and to my surprise they were very easy to pull off. this is unusual as it is a pita to do usually. any thoughts as to why this happened and wnat to do??

I believe I'm going to get an IA 187 10'' or a 12'' I was wondering if anyone can look over my numbers here to be sure that the box I'm planning on building will work correctly.(for a 12) IA Suggests. Ported 2 cubes - 2.5 cubes, 20 - 30 Inches of Port, 28-35 Hz I have designed a box using this tool. http://www.reaudio.com/speaker_box/LPort_Box_Calc.html Width 28" Box Height 16" Box Top Depth 12" Box Bottom Depth 18" Wood Thickness 0.75" Square Port Width 1.5" Square Port Length 4" (seems to help tune it in) This gives me. 30.063035251515 Hz I'm asking here, with these variables, Will this box sound good, and work well. I also plan on cutting the port in the opposing side,…

How much would it be to have my 12 dr reconed to an 18. I know I'd have to pay for shipping as well. Thanks steve-o

Trying to decide what to build so I decided to post and ask your opinions. I am running a SAZ-3500. So here are my 2 choices 4 leathal injection 12's or 2 death penalty 15's. Both ported enclosures. So let me know what you guys think.

Well I am about to take the 21 out and redo the stereo in my truck so I decided to take a few quick vids of it before it came out. Once again, I know it rattles, I know the roof sounds like butt, I dont care. This one woofer has DESTROYED my truck. It moves my windshield a good bit but the camera doesnt catch it. Enjoy. http://www.youtube.com/watch?v=fmx82E3DSzo

Why i cant find information about Wardens subs on Incriminator Audio: No Chrome, No Carbon Fiber, No BS! Period ? I think i saw it before...

I just realized that IA is located like ~3 hours away from me...... I have been wanting to check out these products and take a break from FI. I would like to drive up and take a look around sometime if it's possible.... maybe in a couple of weeks or so. I'd like to see what IA is about!

Does anyone know where to get the T/S specs for IA subs? they aren't listed in the SSA shop or on the IA website (talking specifically about the lethal injection series

Anyone have these parameters? Cant find them on the IA webpage! Need them for a bandpass box. Want to see what we can do with them! Or if anyone can make a suggestion! The project we was thinking about was 8x21" DP in a wall built like a bp box, tuned quite low (about 35hz). My guess is that we have about 1300-1500liters (mabey some more, about 52cubes)

Well you may have seen my for sale thread on caraudio.com, i am getting out of car audio for a while. Just selling my amp and sub/box. Too much weight and shit keeps breaking inside my car, just had my hatch fixed by the dealer cause something got jammed, thank god for factory warranty. So enjoy, equipment is in my sig. (2nd is still processing :fyi:)

i got a IA DR 12 D1 and a sundown SAE 1200D running at 2 ohms it will put out 600 rms i was wondering if it should see more power to really get it poundin tell me what you think. (enclosure is 2.5 cubes ported to 32 hz).

I'm tired of racking my brain with how to fit 2 21" death penalties behind the back seat of my 88 s10 blazer 2 door, so I'm taking the back seat out! So here is my final question, sub and port direction? Subs and port up? Or subs and port forward? Or subs up port forward? Or subs forward and port up?

My wife told me about facebook, so I got on and look who I found: Incriminator Audio

Can't seem to find any info on what people are finding to be optimal for the new DP 15's. I will be running one off of 1500 W and listening to mostly rap. Figuring 4 cubes after all displacements tuned to 32 hz. How much port area should I use? (3) 4" aeros (2) 6" aeros (1) 50 sq. inch normal slot port Thanks for any insite.

Check it out!!! http://www.break.com/index/sexy-car-model-tests-stereo.html

Here is a few vids of my Impala walled with 2 18's powered by a single IA 40.1. stock alt, 3 runs of pos, 3 runs of neg, 2 C&D 134 AH batts DC Power alt should be here in the next week or so 13 cube wall with 175 sq inches of port tuned to ??32-34 hz lol. not real sure on the tuning cause i wasn't real sure on the exact size of the wall....it hits the lows hard though

how does this work ? Come daytona im sure well have alot of team members there to rep orur company ! sides maybe the few who display how else do or would we know ?