Incriminator Audio

Thanks to Nick, once again for pulling through and getting the product out in blazing speed!!!! Video says it all, subscribe for updates!!!!! http://www.youtube.com/watch?v=t9g-VW7sa4w

Thanks Nick and IA/Bass Mekanik for the new cd. If it weren't for the rain I would be outside jamming, but so far it sounds good on my house stereo.

We are releasing: LI 12 and 15 - D1 or D2 - 600 RMS FL 12 and 15 - D2 only for now - 600-750 RMS DR 12, 15, and 18 - D1 or D1 - 1000 RMS DP 18 - D1 or D2 - 1500 RMS Coming next week - April 3rd! Thanks, Nick

Hi guys im really thinking about getting a 40.1 before the sale ends next week.my question is would it be noticable difference between the rd d9( i have one at the moment) and the 40.1.has anybody clamped it yet or how much power would i see at .5 starting impedance a t 14v?

I have 2 12" 187's from incriminator audio in a custom built 4.4 ft^3 box tuned to 31hz powered by a sundown saz-1000D and on some songs the bass just is not there on the low end. The song in question is hypnotize by jeezy. I never really noticed the problem until my friend played the song on his infinity's in a prefabed box and it sounded so much better. Ok the problem is when the song begins there is not a lot of bass. I can feel it a bit but it is not too audible, and when the higher frequency note hits it is so loud. But that is really the only note i can hear well. My subs barely move during the parts in question. the part i have a problem with is from :27 to :40, …

In response to the most recent thread on here, I would like to add this thread to give you guys a place to look at IA installs in one spot without having to dig through the forums. Ill post the link to the build, and a pic or 2 from each one. Starting with a thread I posted a while back that got lots of response: http://www.soundsolutionsaudio.com/forum/topic/37037-post-your-ia-installs-here/ but here are some newer ones as well BJ'S EXPLORER WITH 4 WARDEN 18s http://www.soundsolu...explorer-build/

I get asked daily, how to figure ports, etc. So I thought it would be easier just to write some software that would do all the work for you in a simple to understand program! What also makes it cool, is it will figure backward Length To Hz so if you got an old box laying around it will tell you what its tuned to! I just finised this 5 minutes ago, so it still new, but from my checking it works well. Enjoy! http://www.incriminatoraudio.com/qbev10.exe

when it comin?

So is there a new version coming? I loved the one I heard, and I'd like to see whether the new one would be in contention for my install or not.

a small video of my two 187s that i finally got to get loud after a lot of trial and error. this is a bad video cause i am using a cheap camera and the lows make my cd player skip, I have a TON of sound deadening done to this car but you can still see some flex

Thanks to all the new info and pics of the entire Inciminator line, all the specs and pricing are up on the shop. http://www.soundsolutionsaudio.com/zencart...&cPath=2_20

I have two ia 20.1's pushing two ia dp 21's currently I have one sub on one amp@1 ohm. But I'm only geting 1400w @ 14.3v. The impedance rise is is going up to 2.58ohm. I was thinking about rewiring them to 2 ohm and strapping them. Would that help get more power out of them? Or????? Thanks for any help

I'm planning on starting a slow build over the winter. I have a 2004 Celica, and I'm looking for starting with one 12", and moving onto two in the future. Budget isn't quite set, because most parts will be bought over the majority of winter. Goal is to be loud, but still decent sound. I'm not looking for competition spl, but I do plan on being loud and possibly entering some streetbass, but it's just a daily ground pounder with emphasis on getting loud. My question is, is the death penalty for me? I know it's a cliche question, and I usually hate these threads, but I can't find many reviews. If I'm understanding, the death penalty gets loud, but still sounds pretty good.…

Guys I've got a problem here with a 21 inch Warden and a SAZ 3500 . No matter how we wire it , we keep getting a .7 ohm reading . Series or Parallel seems to make no difference . A lso my elephant sized son stripped one of the negative connections on the amp .... any body got fixes for this ? Any help is appreciated with either problem .

So just in case you didnt know, there is a big 3x db drag and iasca event this saturday in Macon, GA. Word on the street is that a Macon local has issued a $500 challenge to anyone who thinks they are louder than him on music. Now another word on the street is that the King of Bass himself Mr. Tommy McKinnie is planning on showing up at this show with "Ho Problems." The local Macon guy knows this, and said "I aint scared of the King, I am the King." What do you guys think? If your in the area make your way to Hooters in Macon and watch some poor guy lose $500.

Here you go guys: https://www.youtube.com/watch?v=R3BF0JW-5eA

Started on my new build a week or so ago...thought I'd post some pics up over here as well This is the truck after I got it, and found a snug top for it

My 6.4 decided to stop working. No lights or anything. Getting power ground and remote output. Anyone had this issue? It's not mounted anywhere that would have vibration.

Hello, So I there are like 4 hours left in the black and blue sale and I have been biting my nails to the nub trying to decide if I want to pull the trigger on this or not. Incriminator Audio has only recently came onto my radar as an option for me and because of this I am a little weary of dropping 600 bucks on what is essentially a shot in the dark for me. Not to say they IA hasnt been around doing their thing for a long time, I just wasn't aware of them. So I come to the place I know I can get some well informed advice and information from some of the most valuable and experienced audiophiles I have ever dealt with. So let me lay things out to make it a little simpl…

THE NEW FACE OF IA... by far the most violent this car has been, the air flow is ridiculous

I've had tons of phone calls and questions asked since World Finals asking about the Warden.... I will say if all goes to plan you should see them at SBN. I started development of the Warden in October 2004 and we've been constantly improving it as I want it to be the solution for all out SPL. The goal is you will need a Warden to win, we've seen large gains over even some of the best woofers out now. I expect alot of you to be surprised at how well they work and how low the price tag will be. In Super Street 1-2 and other low woofer classes I expect the Warden to really excel when you combine it with the 21" parts we have.... Look out - 4 years of innovation is almost h…

I hope this type of thread is not against the rules. I love this sub its loud but not distorted at all imho it has good SQ also, Its in a ported box with 64" of port area and a volume of 4 cubic feet ran off of a kicker 300.1 amplifier. I ordered it from SSA it arrived in a week undamaged and safe. I just wanted to post this for anyone thinking of buying a good sub thats not gonna be super loud but loud enough to make your ears hurt lol. Once again sorry if this is against any rules. Here is a link to a crappy vid i made of it the day after it was installed not yet broken in.

So since the warden is the big name of incriminator I have a few questions. I have a 12 inch warden and am aiming for some good numbers in my 4 door pontiac grand prix, hence the reason for an aero port. Does anyone have any ideas on what I should do. I have a 6 inch aero port and was wondering what size someone would recomend for the box. The second question I have is should if be internal or extrenal aero port. Any help would be nice. Thanks

My first IA subs and I'm lovin them. All equipment is listed in my sig. 142.5 @ 40Hz sealed up on the dash, with only 2 days break in time. Best sounding subs I have ever owned hands down. I have been missing so much on the low end. The Bassorcist song in the first vid drops around 26Hz and sounds amazing. You guys have a new customer for life!Can't wait till next year when I step up to 2 Death Penalty 12" on an AP30001D!

stay tuned.