Fisher Customs

I just bought 2 Sundown SA-12's and I need a new box for em. If you wouldn't mind drawing up something for me I'd greatly appreciate it. My trunk dimensions are 40inWx20inHx17inD. Im looking to go 3.5 cubes ported @ 30hz. Thanks, Steve

Hello, I tried to contact the good folks at Fisher Customs through their contact link on the website, with no luck. I'd like to purchase a sealed enclosure for my Fi Q12 Dual 2. I'd like to get in touch with the guys at Fisher and start a dialog about the build. Thanks for any and all help.

Can a pair of Fi Q15's be ported and tuned to 30hz in a properly sized enclosure, if my max external dimensions are 22" (d) x 19" (h) x 38.5" (w)? Less height and depth if possible... I was planning on running them sealed, since I know they have great lowend sealed, but if I can still have great lows with more output, I want to got for that.

I just sold my old box and kove subwoofer, So I am in need of a new enclosure for my new 15' ssa xcon, I would love some pictures of a enclosure that you have done that is similiar to this so i can know what kind of craftsmanship I can expect on it. Here is the link I am looking for someone to build a Enclosure - SSA Car Audio Forum - Page 2

i wanted to know if i could make a ported box with a small trunk. the dimenions are 11 1/2 height, 15 depth, 46 length. thanks

This is a build for a 12" Incriminator Audio Lethal Injection. Customer wanted the same design as I had used in the past for the same driver. Might even be going in the same type of vehicle as well. Here are the pics so far...

i was wondering if u can draw me up something with dimensions and all , that would be the perfect ported box for 2 nightshade 15"s?

Hello Mr. Fisher. I was looking at your web site and saw that you had pre made box designs. I was wondering if these designs also included a cut sheet. If not, can one be purchased? I was looking at the 7 ft slot ported box for two 15's. I am planning on using SSA Icons in this enclosure. Thanks. Also what size of wood is supposed to be used for these designs. Thanks for your help.

Just wondering if you have or plan to have package deal with the xcon like the offer for the icons?

This box is 7 cubes at 32 hz. Will house some custom built 15" woofers IIRC. Will be ported using 5- 4" precision ports. Also features a flush mount TRIPLE baffle and some full round bracing. Here are some of the build pics so far...

Feels good to get in the groove again. This is a pretty straight forward build for a local guy here in Wichita. Will be finished off with black carpet in the next few days. Onto the pics...

Ok, so I just bought this box from someone local and I didn't take certain things into account. Regardless, it won't fit for me. I'm too tall and its too deep. The height and width are fine but I need something a few inches narrower. So what would a similar box like 3+/- on so inches narrower sub/ port up cost? The box is amazingly well built and sounds great, I just don't like kissing the steering wheel lol. It's for a LVL3 12 on about 700 watts for now. I'll switch that out later to something that's a dual 2 eventually to use my amps full power potential. Thanks! http://i228.photobucket.com/albums/ee174/kirbycamry/RSXBOXNEWcorner.png http://i228.photobucket.com/albums/e…

Finally back in the shop doing some boxes here and there. Here is my first build in over 6 months... Waiting on final specs from Dylan, but its for a quartet of 10" Fi Q's. Also will feature a plexi window with some engraving on it. Here are some pics of the build.

I would like to purchase plans for a home theater subwoofer enclosure. The active driver is a TC Sounds 15" tc-3000 and will use 3 passive radiators. (2) 15" TC sounds VMP Passives and (1) 18" TC Sounds VMP Passive. I'm thinking a 25" cube with double baffles all arround. Internal bracing can be window type like I've seen in your other designs. This is my basic vision. Please don't hesitate to contact me if you need more information. There wasn't an option on your website to purchase a design for a passive radiator enclosure therefore I decided to contact you first. I look forward to hearing from you.

Im interested in Turpan, if you'd divulge where you get it from? I don't want to mess around with MDF, hearing the horror stories. Thanks, Julian.

I have a 2007 mustang coupe with 2 12" audiopipe TXX-ap12bl in a bassworx pre-fabed enclosure right now..they sound alright in it..get pretty loud..but i want a custom enclosure for them..there powered by an audiopipe ap15001d..im looking for spl..and in a good enclosure..i belive these subs can do just that..now the only problem is the trunk opening on the new stangs...are a little tight..i had to do some fabrication in my trunk to get the box i have in there now..but i was thinking somthing like a 3.5cuft enclosure tuned at around 34-36hz..

I'm looking for plans or a possible build for my Stereo Integrity BM10. I have a LMI welding seat lift in my truck right now so I may have sufficient space under the seat. To fit it would need to have a wedge shape with dimensions of 30" wide, 17" deep, 10" tall on the front, and slanted down to 5" tall at the back. I'm over in Wichita so coming to pick up wouldn't be too far for me. I tried requesting the quote at the website but it says product not found. Here's the specs for the sub. [T/S Parameters: Re (coils in series) Fs 27.1 Le 3.38 Qms 3.08 Qes 0.31 Qts 0.29 Cms Mms 101 Vas 52.5 Sd BL 21.7 SPL 87.4 Displacement .1 ft^3 Recommended enclosures: Ported 1.5 ft^3 t…

I need a box for two Fi Q 12" ported in the trunk of a 2007 Mazda 6. I went out and took some immediate measurements of the cargo space in the trunk. Roughly 28" D x 18" H x 45" W. Looking at roughly 2.0-2.5ft^3 per subwoofer, with the box's ports tuned to 30hz.

Hi, I am buying a 15"Xcon sub these days, and I need a ported box design. I would love to order it from FC, but I live too far away, shipping costs would be HUGE ! I'm in Martinique, in the French Caribeeans! I have the dimensions that I can afford in the car : 35cm(H)* 49cm(L)* 80cm(l) 14" * 19.6" * 32" What can I expect? How to have some real good plans? I don't want to use round pvc tube ports this time, so I will not be able to re-adjust the box; no mistake permitted with this kind of design ! I know you sell the plans on your site, but I want to have some informations before ordering anything. Waiting for you Thanks Alain aka Notorious !!!

Due to some crazy hours at work lately (and not looking to slow down anytime real soon), I have made the decision that I will no longer be building enclosures for an undetermined amount of time. It has been a very, very tough decision to make, but I feel it is necessary for my customers as well as FC as a whole. I do not get to spend nearly as much time on my computer at home these days, so emails sit in my inbox. When I do have time to answer emails, it is taking away time from the shop, and time is very limited right now. Customer service is just as important to me as the quality of the final product, so I feel the only way to fairly treat my customers is by shutting d…

do you guys have any experience with boxes that go underneath the back seats in a dodge ram that is between the years of 1994-2001? thanks!

Just wanted to ask what an eta would be on my box design, i ordered last night so im not expecting 24hr service or anything, i just want to get an idea of when it might be done, nothing complicated, ported at 29hz with double baffle flush. But i will be getting my subwoofer soon and i wanted to know when i should be ready to make it. Thanks

I sent an email about 2 weeks ago through FC's website and have not received a response. Are enclosure still available? Please contact me at [email protected] so i can give my contact information thank you.

I saw on the website there are loaded enclosures with SSA subs but are there any with Fi subs? Perferably a 12" Q or Bl

I am about to buy a DC Level 4 15" and I want to build a box. But, I want you guys to design it for me (yes, I will pay, haha). It is going into a hatchback. It will probably be 3.5 cubic feet. So my question is, whats the best way to have the sub and port positioned? Thanks. Also, what do you think is the best tuning? I was thinking maybe 35hz since I listen to about every type of music.