Fisher Customs

Mark and Aaron let me join the SSA team. They are allowing me to be a "ICON/Enclosure" dealer. Basically offering their drivers, in my boxes, and saving the customer quite a bit of money. More info will be posted on that, if the interest is there, and of course if its OK with the SSA fellas. This box, is 4.25 cubes @ 32 hz for a pair of 12" ICONS. It will be the "standard" enclosure in the dual 12 ICON package. Here are the pics from the build-up...

Got a nice BIG sealed box for a quartet of 15" Havocs. Pretty straight forward build with a decent amount of internal bracing. Onto the pics...

Specs on it are 2.35 cubes @ 34 hz. This one will be left bare and will use a 4" PSP for the port. Im not sure on the year of Mustang this is for, but I believe it might be a mid 90's.

i need a ported box 4.0 cu ft tuned at 32hz for a single 15 Q, is this a good enclosure for one? also is the crx style good? how much am i looking at? i need it shipped 2 houston. who can i get in contact with?

ordered a icon/fisher combo, what the best type of screw to mount my sub in box?

This is a build for a 12" Incriminator Audio Lethal Injection. Customer wanted the same design as I had used in the past for the same driver. Might even be going in the same type of vehicle as well. Here are the pics so far...

This is a 3.0 @ 32 hz enclosure for a single 15" Fi BL. Crx style, with a double baffle. The box will be left bare. All that is left to do, is sand it up, and the badge and terminals, and then get it ready for ship.

This is for a local guy. Has a Firebird with T Tops, so we were pretty limited to what we could do. He already had a pair of 12" Rockford P1's he wanted to use. We just did a little sealed box, that fit pretty good in the area available. He opted for vinyl on the finish (first time using vinyl for a customer), as well as wanted the Hyperlite logo on it. Here is what we did...

thats right a whole fresh redesigned site with store. Still have some typos and glitches to work out over the next few hours but here we go. http://www.fishercustoms.com

Bj, I just sent you an email , but I figured I'd post a topic on here as well. Great work! I am looking for something custom and small that will fit in my trunk and take up as little room as possible. I have seen people with small enclosure to the right or left of the trunk that looked pretty cool, but I am open to anything. I'd like it carpeted black as well. Please let me know what you need from me as far as measurements, in order to give me a price quote. Thanks man.

This is a fairly straight forward slot ported box. It will also feature a plexi window on the top, that will be engraved "SOU". The CNC part is finished, but no pics of it, due to the fact I dont want to take off the protective paper yet. The finish will be black carpet, with the inside of the box getting white paint. He is possibly going to be adding LEDs inside as well.

I got the pricing for the new shirts today. They will run $17 shipped for M-2XL and $1 extra for each size larger than that. Also, they are available in white or black. I need a minimum order of 25 shirts before I can place the order. Therefore I am having a pre-order. Once 25 shirts are ordered and paid for, I will place my order. As soon as they are finished, I will begin shipping them out. If anyone has any questions, or problems ordering (hope I got the store set up right) just let me know. Here is a link to the store: http://www.fishercustoms.com/store/index.p...492730154d80e75 And here is the final design again:

Merry Christmas to all who might remember me! B.J. Fisher And I miss building... That is all.

This will be the enclosure offered with the package deal. I will get some shots of the drivers installed in this once I get it all completed. Box is 4.25 cubes @ 32 hz. Standard slot port, double baffle and charcoal carpet, on this one.

Customer is actually on his way from Lincoln as we speak, to pick this up in the morning. 100 square inches of port with a dual flared port.

Center located port, double baffle on the front. Pretty straight forward. Customer wants white port and black carpet. Should look nice when complete.

I was thinking about getting an 8 cube enclosure for my 2 Fi BL 15's with plexi glass, flared port, and carpet. How much would this cost? I ask where you are located because of shipping, and it must be a haul to ship a box that big. So where are you located?

I dont recall the specs off the top of my head. Maybe he will swing in with them. Not a regular ole' ported box. I like getting these kind of builds sometimes. Nice to change it up a little every now and again.

He had Pete do the design from TTB, but unfortunately it didnt quite fit my build style. So Chris re-did the design, keeping the internal dims and everything exact, just changed the orientation of the panels to fit our style a little better. Not exactly sure whats going in the enclosure, or what it is going in. It will be two mirrored enclosures, that he will be bolting together once he gets them in his vehicle. I got working hard this weekend, and didnt take too many pics. As we set now, both enclosures are completely built, and will bet getting sanded, and ports painted tomorrow. From there, carpet soon. Onto the pics...

I have had these on my camera for over a month now. Was just going to delete them, but decided I would post them up, just for the heck of it. And that one that doesn't quite resemble a sub box, well it was a beer pong table for a friend's house. LOL

He is going to be driving through the area this holiday weekend, so he is going to be swinging by the shop and picking it up. I believe the specs were 2.5 @ 32 hz, maybe. He wanted a pair of 3" aeros on the box as well. I had to modify the mounting flange of the ports a little. The box was only 12" tall, and each port was 6.25" wide. What I came up with, I think will be pretty cool. I will save that for later on though. Onto the pics...

I need a 1 cube box tuned to 32hz for my single L7 8! Right now its in a .43 sealed.

Have not done a flared port box in a long time it seems, and this is the 3rd one this weekend. Its crazy how that kind of stuff works out sometimes. Anyways, here are the pics of the build:

Dont recall the exact specs. Just know its for a pair of 15" Fi Bl's. Subs up, port facing back. Charcoal carpet, with Dylan's little flavor on the top panel. Here are the complete build pics.

have an order i placed with fisher and cant get any type of reply from email or from pm. how long does it usally take to get some type of response?