Fisher Customs

This box will be orientated a little differently than normal in his trunk. Port will be firing sideways.

I have teamed up with Jacob to sponsor a raffle for a young kid in need of a bone marrow transplant. Basically, he has a rare skin disease, and if he doesnt get this transplant, he will die from skin cancer within 10 years. This certain procedure has only been done twice (IIRC) and therefore Kyle's insurance has deemed in "experimental" and will not provide any financial help. It is estimated that $500,000 is needed for the operation. Since May, nearly $200,000 has been raised. Much more info can be found here: http://cotaforkyleh.com/ I got the opportunity to meet Kyle recently, and this young man is amazing. He has such high spirits and is a very down to earth kid. Kyle…

i wanted to know if i could make a ported box with a small trunk. the dimenions are 11 1/2 height, 15 depth, 46 length. thanks

I noticed the fisher website was down. Has it been for a while? Or maybe changed urls?

Pretty straight forward box here. Center slot port, no carpet. 4 cubes @ 32 hz for a pair of 12" Type R's.

This is a build for a 12" Incriminator Audio Lethal Injection. Customer wanted the same design as I had used in the past for the same driver. Might even be going in the same type of vehicle as well. Here are the pics so far...

Dont recall all the specs and whatnot for this one, but Im sure he will step in with some info. Little different design, which is nice to build every now and again. Here are the pics from tonight...

I have an 05 camry and am planning on purchasing a FI Bl. I have more than enough room for the overall cubic feet for the box. My concern is the height. there is a bar in my trunk that is a little over 17 inches above the trunk floor. If i were to move a potential box forward towards the trunk lid, I could gain an inch or two in height. If the sub is vertical, firing forward toward the trunk lid, how tall would the box need to be? Also is is sub forward the best layout for my space? Haven't even thought about port direction yet. I'm kind of a noob at this

I have had good luck in the past with contests to get stuff designed. Had a lot of success with the logo design contest, and then the business card, so Im ready to give it another try. Im looking to get some new T-Shirts designed. The last ones were 1 color front (just said "FisherCustoms.com" on on left chest area) and a 2 color back (had my logo). I would be ok to go with 2 colors front and back (orange and silver) to add a little more to the shirts. The contest will be for the best T shirt design. Will probably open up a second thread to vote on. The winner will receive a free T shirt. No real rules, just want something with my logo on it, that looks nice. I wont give …

2.5 cubes @ 32 hz. Flared por, double baffle and carpet. Here are the pics:

Im thinking about ordering some more stock of Tshirts. They never really went over all that well, when I had them a couple years ago. But lately, I have been getting asked quite often when I would have them back in stock. I wanted to test the waters first, before I spent a lot of money ordering in a bunch of shirts. Who might be interested? Would you be willing to pre-order? The price will probably be around $18-20 shipped via USPS priority. Also, what sizes would I need. Last time I ordered M-XL, but had quite a few requests for other sizes (mainly bigger ones). So who would be game?

I had filled out the contact form on your website and haven't received a response. Please let me know if you are still doing box work. My name is Travis and my number should be listed in the form I sent.

This enclosure is not going to be like most I have done lately. We are insetting the front panels instead of the sides. He is wanting the front painted white and the port black. Will also be wrapped in black carpet. Here is the start:

Finally! I have had these panels cut and painted for well over a month now, just finally finding a little time to get it finished so we can get the Icon Packages up on the site with some pics. This will be the "standard" enclosure that will be offered with the SSA/FC combo.

Hey guys, many thanks to BJ and to Chris for the excellent design on this box. It's a 7cuft ported setup tuned @ 32Hz. The 2 Fi Q 15's are on order. I went through 2 sheets of 3/4" MDF and three drill batteries at work but she's all done! Here are the build pics All cut down The framework Starting to look like a box Double baffles in place All caulked up Whew... finished!!

shopping around for some prices, need a enclosure for 3 18'' 6 cu ft each, sealed, going in a 2002 yukon denali, took the 3rd row seat out so im willing to use all the space i have back there

Exactly what information do i need to provide when requesting a new order? (max dimensions, tuning frequency, etc. ????) Before I contact Fisher

This is for a local guy. Has a Firebird with T Tops, so we were pretty limited to what we could do. He already had a pair of 12" Rockford P1's he wanted to use. We just did a little sealed box, that fit pretty good in the area available. He opted for vinyl on the finish (first time using vinyl for a customer), as well as wanted the Hyperlite logo on it. Here is what we did...

Have not done a flared port box in a long time it seems, and this is the 3rd one this weekend. Its crazy how that kind of stuff works out sometimes. Anyways, here are the pics of the build:

This design has become quite popular lately. This one is 3 cubes @35 hz I believe, for a pair of 12" Nightshades. Will be using a 6" aero. Onto the pics...

I have had these on my camera for over a month now. Was just going to delete them, but decided I would post them up, just for the heck of it. And that one that doesn't quite resemble a sub box, well it was a beer pong table for a friend's house. LOL

Got a nice BIG sealed box for a quartet of 15" Havocs. Pretty straight forward build with a decent amount of internal bracing. Onto the pics...

Im in the process or getting a subwoofer design for my car, but the thing is the box have to built inside the trunk which means i have to assemble myself. my question is if i send you the box design can you make the cuts and just ship me the enclosure in pieces?

gonna take a shot in the dark but whats the chances of getting a box built for a 95 camaro for a xcon 15. i looked at some boxes on ebay n stuff but scared to try one. taking out the t-top rack will be no problem cause i rarely use it anyway. thanks in advance