Fisher Customs

thats right a whole fresh redesigned site with store. Still have some typos and glitches to work out over the next few hours but here we go. http://www.fishercustoms.com

Simple little box here, no carpet. Onto the pics...

This will be the enclosure offered with the package deal. I will get some shots of the drivers installed in this once I get it all completed. Box is 4.25 cubes @ 32 hz. Standard slot port, double baffle and charcoal carpet, on this one.

I have 2 dual 12" Alpine Type R's...I've been told that ported is the way to go for these subs. There is a problem though. My trunk is small as well as the trunk opening. Right now I have a crappy sealed box 38"W x 10" TD 14" BD x 14" H...it has two old MTX subs in it right now. It was a pain to get in because the height of my trunk opening is 14" as well and the width is 35". I've made a few designs in photoshop but I'm not sure if they'd work due to my lack of knowledge in this area: I'm not sure how many cubic feet will be needed but I'd like the width to be around 30" and the height to be less than 14". Again...these are just some ideas...not sure if they'd work...…

Hey, I was curious, I have a 2011 mustang, and i was wondering after i get back from basic training i'll be making a trip up to Witchita every month for about 3 days to work at McConnell Air Force Base, If i bring my car up there, could you build me an enclosure in the trunk for two Xcon 12's? Thanks, Julian.

Specs on it are 2.35 cubes @ 34 hz. This one will be left bare and will use a 4" PSP for the port. Im not sure on the year of Mustang this is for, but I believe it might be a mid 90's.

Bj, I just sent you an email , but I figured I'd post a topic on here as well. Great work! I am looking for something custom and small that will fit in my trunk and take up as little room as possible. I have seen people with small enclosure to the right or left of the trunk that looked pretty cool, but I am open to anything. I'd like it carpeted black as well. Please let me know what you need from me as far as measurements, in order to give me a price quote. Thanks man.

ordered a icon/fisher combo, what the best type of screw to mount my sub in box?

I dont recall the specs off the top of my head. Maybe he will swing in with them. Not a regular ole' ported box. I like getting these kind of builds sometimes. Nice to change it up a little every now and again.

I believe this is for a single 15" Nightshade. Will be finished off in black carpet.

He is going to be driving through the area this holiday weekend, so he is going to be swinging by the shop and picking it up. I believe the specs were 2.5 @ 32 hz, maybe. He wanted a pair of 3" aeros on the box as well. I had to modify the mounting flange of the ports a little. The box was only 12" tall, and each port was 6.25" wide. What I came up with, I think will be pretty cool. I will save that for later on though. Onto the pics...

This is a 3.0 @ 32 hz enclosure for a single 15" Fi BL. Crx style, with a double baffle. The box will be left bare. All that is left to do, is sand it up, and the badge and terminals, and then get it ready for ship.

Have you made an enclosure for the crew cab titan? Im doing a seat raise which gives me roughly 11.5-12" of clearance from the front of the seat to the floor, and 8" in the rear. I want to fit a beefy 10" like the Adire Brahma, or RE SX or FI BL.....do you know if I will be able to manage this? I wanna do a ported box for 1 10" sub.

This is basically the standard box offered with the Icons, but had to change the orientation of the panels around just a little to allow for a flush mount. It will be finished off with carpet as well.

This is a nice little 1.0 cube sealed enclosure after displacement for a single 12" Mag v4 I believe. It will be finished off with carpet, once I get the compressor back up and running. Here are a few pics.

I got the pricing for the new shirts today. They will run $17 shipped for M-2XL and $1 extra for each size larger than that. Also, they are available in white or black. I need a minimum order of 25 shirts before I can place the order. Therefore I am having a pre-order. Once 25 shirts are ordered and paid for, I will place my order. As soon as they are finished, I will begin shipping them out. If anyone has any questions, or problems ordering (hope I got the store set up right) just let me know. Here is a link to the store: http://www.fishercustoms.com/store/index.p...492730154d80e75 And here is the final design again:

I need a 1 cube box tuned to 32hz for my single L7 8! Right now its in a .43 sealed.

Dont recall the driver, but this is a pretty standard slot ported enclosure. Double flush mount baffle, and will be finished off with black carpet.

Nice simple slot ported box with no carpet. Onto the pics.

Something kind of crazy happened here. I dont ever recall doing an enclosure with some PR's. Then I did 2 today, haha. Both are the exact same specs, except this one chose to add a double baffle. Onto the pics...

i have a 93 mustang convertible and i was planing on having two 12' sundown nightshades instaled and i was wondering if you have evern done a box for my body style, if so how much would it be?

BJ can we get any pics going for this build? love to see the progress thanks Travis 350zspl High Decibel Audio

hey what size would you recommend for 2 xcon 15s and 2 sundown 1500s going in the back of a 2005 dodge quad cab truck. my MAX measurement on width is 57" and on depth is 24". height is flexible but i dont want it blocking the window lol

He sent me the dimensions for the design, and its for a trio of Sundown E8's I believe. Straight forward design here, so here are the pics... Ill have it finished Tuesday I believe.

This box is 7 cubes at 32 hz. Will house some custom built 15" woofers IIRC. Will be ported using 5- 4" precision ports. Also features a flush mount TRIPLE baffle and some full round bracing. Here are some of the build pics so far...