Fisher Customs

I believe this is the 4th mustang enclosure with similar designs. All have been ported using aeros. We changed it up a bit, and this might be one of the most difficult enclosures I have done, due to all the different angles. Teaser pic...

I have teamed up with Jacob to sponsor a raffle for a young kid in need of a bone marrow transplant. Basically, he has a rare skin disease, and if he doesnt get this transplant, he will die from skin cancer within 10 years. This certain procedure has only been done twice (IIRC) and therefore Kyle's insurance has deemed in "experimental" and will not provide any financial help. It is estimated that $500,000 is needed for the operation. Since May, nearly $200,000 has been raised. Much more info can be found here: http://cotaforkyleh.com/ I got the opportunity to meet Kyle recently, and this young man is amazing. He has such high spirits and is a very down to earth kid. Kyle…

Hi FC, Just wondering about getting an enclosure and a cut out sheet for another one from you. I send an email to you from the site a couple days ago and have not heard anything. I know you guys are probably quite busy, I just wanted to make sure that you got my email. Hope it was ok to post this here. If not I am sorry. I would love to get an enclosure done by FC and it would be a tricky task. That is why I am not gonna attemp the big one. Thx Josh~

Heres what happened. I sold the Q's and enclosure yesterday to the guy. It sounded damn nice in his jeep too. He just bought the jeep last Thursday btw. He said he went to sleep and got woke up to see this.... The Q's baskets sitting in the enclosure... The amp is leaning against the enclosure... I guess the firefighters said that the fire started from a faulty rear dome light. I feel so bad for him. The amp was actually mine. I let him borrow it until his AQ2200d gets here on the 10th. He's giving me the AQ2200d when it gets here. I feel so bad for the guy. Heres the original thread. http://forum.ecoustics.com/bbs/messages/4/491237.html

This enclosure is for a pair of 12" SI Mag V4's. Customer wanted to go sealed, and make it very sexy. Between the customer and Dylan, I think they did a fantastic job. This might be one of the coolest projects I have ever done. Should not only sound great, but also should be very, very appealing to the eye when we are all finished Enough of my rambling, here are the pics from tonight.

Looking for an idea of price shipped for an enclosure that houses a pair of 12" Alpine type-r's (dvc 4ohm). Trunk space is 37Lx38Wx28H(height can vary but not to much more than 35"). Enclosure to be is a single box with dual chambers each chamber to be 1.7^3 ft. tuned to 33Hz. Kind of like "Model: 4.0@35Hz_12" pair on your site but different dimensions. Thanks for any help and great work all around from the enclosures to the site nice work.

Here is 2 of 2. Enjoy.... This box is off to a slow start.... if you dont know what project Im talking about, here is a thread about it http://www.caraudio.com/forum/showthread.php?t=282423 Got started on this box Friday, cutting all the panels, except the bracing. Spent a little time working on the dual flare, and just couldnt get it to work. I went back to the drawing board, and tonight, got the correct spacing on the kerfs. Hopefully Chris will be able to redesign the flares with the new info. But here is a couple pics of what I have thus far. This should be a pretty cool build in the end....

max dimensions are 36w17h23d... is it possible to have sub back port side or would the traditional sub and port back work better. 15 fully loaded by the way

I got the pricing for the new shirts today. They will run $17 shipped for M-2XL and $1 extra for each size larger than that. Also, they are available in white or black. I need a minimum order of 25 shirts before I can place the order. Therefore I am having a pre-order. Once 25 shirts are ordered and paid for, I will place my order. As soon as they are finished, I will begin shipping them out. If anyone has any questions, or problems ordering (hope I got the store set up right) just let me know. Here is a link to the store: http://www.fishercustoms.com/store/index.p...492730154d80e75 And here is the final design again:

Simple little box here, no carpet. Onto the pics...

This is basically the standard box offered with the Icons, but had to change the orientation of the panels around just a little to allow for a flush mount. It will be finished off with carpet as well.

From fishercustoms.com? I ordered one and i still haven't gotten it. It isn't a custom one its just a 12 dollar dual 12 design. I thought it would be a direct download, am i missing something?

Just got a little start on this one, before I had to do a little painting I missed...

Hey whats up im doing a build for my ROOM for music haha. I have a sub in my car why not at home. Ok So i bought a RE SR10-D4 10", here are the specs. I want to Make a slot vented box 1.5cf tuned 34 hz. people in the other forums said that the tuning will be too high for my room my room is 12'x9'. what are your views on it? I am going to put 300 rms. Ive built boxes before But i still dont know how to design one on my own so im asking for you guys to help me with the build could someone design a box for me i want the sub to be top mounted with the port on the side. I just need a cut out sheet with the dimensions of the box. billy Specs of the sub * Kraft Pulp Cone * Ruba…

This is the standard enclosure offered with the Icon package. This was built early last week for a customer who already has an Icon I believe.

I picked the top 5 that I liked the best. Vote for your favorite. Please only vote once. Ill let it run until the voting seems to have slowed down a lot. Thanks guys! -B.J. Design #1 Design #2 Design #3 Design #4 Design #5

I tried to make an order a little bit ago through the website. And after I put my address, and went to go to the payment method, it says that you are not currently shipping to my area. Is there something that you have against Illinois? lol no, but seriously, I was wondering if I could be informed on the situation, and if you'll ever be shipping to illinois? thanks

Hey guys, many thanks to BJ and to Chris for the excellent design on this box. It's a 7cuft ported setup tuned @ 32Hz. The 2 Fi Q 15's are on order. I went through 2 sheets of 3/4" MDF and three drill batteries at work but she's all done! Here are the build pics All cut down The framework Starting to look like a box Double baffles in place All caulked up Whew... finished!!

Im thinking about ordering some more stock of Tshirts. They never really went over all that well, when I had them a couple years ago. But lately, I have been getting asked quite often when I would have them back in stock. I wanted to test the waters first, before I spent a lot of money ordering in a bunch of shirts. Who might be interested? Would you be willing to pre-order? The price will probably be around $18-20 shipped via USPS priority. Also, what sizes would I need. Last time I ordered M-XL, but had quite a few requests for other sizes (mainly bigger ones). So who would be game?

I have had good luck in the past with contests to get stuff designed. Had a lot of success with the logo design contest, and then the business card, so Im ready to give it another try. Im looking to get some new T-Shirts designed. The last ones were 1 color front (just said "FisherCustoms.com" on on left chest area) and a 2 color back (had my logo). I would be ok to go with 2 colors front and back (orange and silver) to add a little more to the shirts. The contest will be for the best T shirt design. Will probably open up a second thread to vote on. The winner will receive a free T shirt. No real rules, just want something with my logo on it, that looks nice. I wont give …

I think the point of this box may be to get LOUD! He is coming down to pick it up early next week, so I might snap a few pics of it in the Blazer as well. Still have to add a Chevy Bow Tie to the front, then wrap it in carpet.

Nice simple slot ported box with no carpet. Onto the pics.

This is for a local guy. Has a Firebird with T Tops, so we were pretty limited to what we could do. He already had a pair of 12" Rockford P1's he wanted to use. We just did a little sealed box, that fit pretty good in the area available. He opted for vinyl on the finish (first time using vinyl for a customer), as well as wanted the Hyperlite logo on it. Here is what we did...

Have not done a flared port box in a long time it seems, and this is the 3rd one this weekend. Its crazy how that kind of stuff works out sometimes. Anyways, here are the pics of the build:

Customer is actually on his way from Lincoln as we speak, to pick this up in the morning. 100 square inches of port with a dual flared port.