Fisher Customs

I sent an email about 2 weeks ago through FC's website and have not received a response. Are enclosure still available? Please contact me at [email protected] so i can give my contact information thank you.

Just wondering if you have or plan to have package deal with the xcon like the offer for the icons?

Can a pair of Fi Q15's be ported and tuned to 30hz in a properly sized enclosure, if my max external dimensions are 22" (d) x 19" (h) x 38.5" (w)? Less height and depth if possible... I was planning on running them sealed, since I know they have great lowend sealed, but if I can still have great lows with more output, I want to got for that.

Just got a little start on this one, before I had to do a little painting I missed...

everytime i come to the ssa forums i always come to check out this box http://www.soundsolutionsaudio.com/forum/i...showtopic=22072 ... i will be running 15 nightshades soon as i get the 12's reconed to 15's. that box is ideal of what i am trying to get built but instead i want my subs and port facing back with the plexi windows on top... my zip is 70501

Dont recall the driver for this enclosure, but it will be finished off in black carpet.

Its for a 12" Fi Q. 1.8 cubes @ 32 hz. Flared port, flush mount baffle, and carpet. Here are the build pics:

I'm needing some box plans for a upcoming build, and I'm hoping you could make some for me, or lead me to someone that can make a set. But, I'm wanting to make a rear loaded folding horn for a single SS 12" RL-p. Is that something you can pull off for me?

Hey BJ, I am in need of a box. I bought two JL Audio 8w7's to go into my 2006 Mustang. Not sure if I want sealed of ported... SQ is the only goal. Can you do amp racks? I will have three Sundown SAX-125.2 amps, two of which will power the subs. Everything needs to be carpeted, and ideally I'd like some easy and fast way to disconnect and carry these out of the trunk. Something like handles or something? What can you, or other forum members, suggest?

max dimensions are 36w17h23d... is it possible to have sub back port side or would the traditional sub and port back work better. 15 fully loaded by the way

Its that time again! We had a good turnout for the last raffle that ran towards the end of 08. Had a lot of people ask to do another one. Even had some more vendors step up to help out with prizes. Rules will be the same as last one. Tickets will be purchased for $1 per ticket, with 100% of the profits going directly to Kyle's cause. Tickets will be available starting March 11th. The actual drawing of the raffle will start April 1st, but tickets will still be sold until all prizes have been awarded. Just like the last one, 1 name will be drawn each day, until a name is drawn 3 times. Little new info on Kyle... They currently have raised over $255,000 towards the needed $5…

another custom header for your section. Welcome to SSA BJ!

I am looking to have a design built for my future system. I am buying 2 Digital Designs 9518g's for my Hummer H2 (SUV) The max dimensions I have to work with are 27 length, 34 height, and 46 width. I want it to be musical but at the same type move a LOT of air. If possible, id like to be able to run a 149.9 in bass race with it but I am not willing to sacrifice quality to make it sound like a fart box. I will be powering them with 5k watts. Please PM me if you think you can do it..

Hey guys, many thanks to BJ and to Chris for the excellent design on this box. It's a 7cuft ported setup tuned @ 32Hz. The 2 Fi Q 15's are on order. I went through 2 sheets of 3/4" MDF and three drill batteries at work but she's all done! Here are the build pics All cut down The framework Starting to look like a box Double baffles in place All caulked up Whew... finished!!

Hello, I'm not sure if you remember me but I e-mailed you guys a few weeks ago about a box for two 10w6v2's, well I sold those and will get a 13w6v2, I'm hoping you guys can just build a simple sealed box for me. I sent you guys the 25$ for the design and I am waiting for a reply. What do I do now? I emailed chris(at)fishercustoms(dot)com, just waiting for a reply. Is there anything else I should do? Did I do everything correctly?

I noticed the fisher website was down. Has it been for a while? Or maybe changed urls?

Is it possible to make a similar box for 2 12" IDQ subs? I have a 2008 Mustang. Thanks!

Hi i know this is perhaps a little off topic but was thinking when you use fibreglass or carbon fibre as detailing on a box(around the port area and front pannel) will this stick to the wood or will this cause some nasty rattle or something? if this is possible what would be the trick behind it? thx

I just ordered a Fully Loaded Fi BL 12 to put in the trunk of my 06 mustang. I have been looking at your builds and really like them. I was wondering how much it would cost for a box around 2-2.3 cubic feet tuned to 32~35 hz? Also, I would like to kinda customize it with an Fi logo. But thats not as important as gettin the best possible box. Thanks

I just sold my old box and kove subwoofer, So I am in need of a new enclosure for my new 15' ssa xcon, I would love some pictures of a enclosure that you have done that is similiar to this so i can know what kind of craftsmanship I can expect on it. Here is the link I am looking for someone to build a Enclosure - SSA Car Audio Forum - Page 2

This is for a Trio of of Sundown E8's I believe... Final pics.

I am just curious to know what the difference between flared and standard slot ported boxes. Obviously outside of appearance is there any performance difference???? I am looking for a nice ported enclosure for my 12" AA Havoc.

Greetings All!! I've seen the boxes made by Fisher Customs and I must have one!!! I'll be purchasing 2 RE AUdio SX15's and I need a CRX style enclosure to do them justice. I don't have the dimensions on my vehicle and I was curious to know if an enclosure has been made for a Tahoe previously. I'll also be pairing them up with a Kicker 2500.1

Hello, I tried to contact the good folks at Fisher Customs through their contact link on the website, with no luck. I'd like to purchase a sealed enclosure for my Fi Q12 Dual 2. I'd like to get in touch with the guys at Fisher and start a dialog about the build. Thanks for any and all help.

Hey BJ, I'm Going To Get Brian To Make Some Designs Up For Me, So We'll See How That Goes, But I'm Definitely Using You As The Builder. Damn Glad I Live In Kilgore So I Can Just Pick It Up Instead Of Pay Shipping For This Box And The 28 Cubic Foot Beast Im Gonna Need Later.