Fisher Customs

Hi FC, Just wondering about getting an enclosure and a cut out sheet for another one from you. I send an email to you from the site a couple days ago and have not heard anything. I know you guys are probably quite busy, I just wanted to make sure that you got my email. Hope it was ok to post this here. If not I am sorry. I would love to get an enclosure done by FC and it would be a tricky task. That is why I am not gonna attemp the big one. Thx Josh~

Im in the process or getting a subwoofer design for my car, but the thing is the box have to built inside the trunk which means i have to assemble myself. my question is if i send you the box design can you make the cuts and just ship me the enclosure in pieces?

Just wanted to ask what an eta would be on my box design, i ordered last night so im not expecting 24hr service or anything, i just want to get an idea of when it might be done, nothing complicated, ported at 29hz with double baffle flush. But i will be getting my subwoofer soon and i wanted to know when i should be ready to make it. Thanks

i have a 93 mustang convertible and i was planing on having two 12' sundown nightshades instaled and i was wondering if you have evern done a box for my body style, if so how much would it be?

Hello there, wanting to know the price for a slot ported enclosure for an FI 12" Q series sub to their dimensions? You can contact me at [email protected]. Their recommendations are; 12” Q ported enclosure 2.35 cubic feet @ 32Hz http://www.soundsolu...ies-cut-sheets/

Hi i know this is perhaps a little off topic but was thinking when you use fibreglass or carbon fibre as detailing on a box(around the port area and front pannel) will this stick to the wood or will this cause some nasty rattle or something? if this is possible what would be the trick behind it? thx

Its that time again! We had a good turnout for the last raffle that ran towards the end of 08. Had a lot of people ask to do another one. Even had some more vendors step up to help out with prizes. Rules will be the same as last one. Tickets will be purchased for $1 per ticket, with 100% of the profits going directly to Kyle's cause. Tickets will be available starting March 11th. The actual drawing of the raffle will start April 1st, but tickets will still be sold until all prizes have been awarded. Just like the last one, 1 name will be drawn each day, until a name is drawn 3 times. Little new info on Kyle... They currently have raised over $255,000 towards the needed $5…

I have had good luck in the past with contests to get stuff designed. Had a lot of success with the logo design contest, and then the business card, so Im ready to give it another try. Im looking to get some new T-Shirts designed. The last ones were 1 color front (just said "FisherCustoms.com" on on left chest area) and a 2 color back (had my logo). I would be ok to go with 2 colors front and back (orange and silver) to add a little more to the shirts. The contest will be for the best T shirt design. Will probably open up a second thread to vote on. The winner will receive a free T shirt. No real rules, just want something with my logo on it, that looks nice. I wont give …

I got the pricing for the new shirts today. They will run $17 shipped for M-2XL and $1 extra for each size larger than that. Also, they are available in white or black. I need a minimum order of 25 shirts before I can place the order. Therefore I am having a pre-order. Once 25 shirts are ordered and paid for, I will place my order. As soon as they are finished, I will begin shipping them out. If anyone has any questions, or problems ordering (hope I got the store set up right) just let me know. Here is a link to the store: http://www.fishercustoms.com/store/index.p...492730154d80e75 And here is the final design again:

I picked the top 5 that I liked the best. Vote for your favorite. Please only vote once. Ill let it run until the voting seems to have slowed down a lot. Thanks guys! -B.J. Design #1 Design #2 Design #3 Design #4 Design #5

thats right a whole fresh redesigned site with store. Still have some typos and glitches to work out over the next few hours but here we go. http://www.fishercustoms.com

I am just curious to know what the difference between flared and standard slot ported boxes. Obviously outside of appearance is there any performance difference???? I am looking for a nice ported enclosure for my 12" AA Havoc.

I just sold my old box and kove subwoofer, So I am in need of a new enclosure for my new 15' ssa xcon, I would love some pictures of a enclosure that you have done that is similiar to this so i can know what kind of craftsmanship I can expect on it. Here is the link I am looking for someone to build a Enclosure - SSA Car Audio Forum - Page 2

J/K, can't wait to see john's build. Hope you two are staying warm out there in KS! It's nice and warm here. lols. I want pics immediately also!

I have the design, the dimensions and everything. I just need it built and shipped. Need to know pricing info and other details if possible. Thanks.

Hi, I am buying a 15"Xcon sub these days, and I need a ported box design. I would love to order it from FC, but I live too far away, shipping costs would be HUGE ! I'm in Martinique, in the French Caribeeans! I have the dimensions that I can afford in the car : 35cm(H)* 49cm(L)* 80cm(l) 14" * 19.6" * 32" What can I expect? How to have some real good plans? I don't want to use round pvc tube ports this time, so I will not be able to re-adjust the box; no mistake permitted with this kind of design ! I know you sell the plans on your site, but I want to have some informations before ordering anything. Waiting for you Thanks Alain aka Notorious !!!

Hello, I tried to contact the good folks at Fisher Customs through their contact link on the website, with no luck. I'd like to purchase a sealed enclosure for my Fi Q12 Dual 2. I'd like to get in touch with the guys at Fisher and start a dialog about the build. Thanks for any and all help.

I have 2 dual 12" Alpine Type R's...I've been told that ported is the way to go for these subs. There is a problem though. My trunk is small as well as the trunk opening. Right now I have a crappy sealed box 38"W x 10" TD 14" BD x 14" H...it has two old MTX subs in it right now. It was a pain to get in because the height of my trunk opening is 14" as well and the width is 35". I've made a few designs in photoshop but I'm not sure if they'd work due to my lack of knowledge in this area: I'm not sure how many cubic feet will be needed but I'd like the width to be around 30" and the height to be less than 14". Again...these are just some ideas...not sure if they'd work...…

Due to some crazy hours at work lately (and not looking to slow down anytime real soon), I have made the decision that I will no longer be building enclosures for an undetermined amount of time. It has been a very, very tough decision to make, but I feel it is necessary for my customers as well as FC as a whole. I do not get to spend nearly as much time on my computer at home these days, so emails sit in my inbox. When I do have time to answer emails, it is taking away time from the shop, and time is very limited right now. Customer service is just as important to me as the quality of the final product, so I feel the only way to fairly treat my customers is by shutting d…

Hey, I was curious, I have a 2011 mustang, and i was wondering after i get back from basic training i'll be making a trip up to Witchita every month for about 3 days to work at McConnell Air Force Base, If i bring my car up there, could you build me an enclosure in the trunk for two Xcon 12's? Thanks, Julian.

Hello Mr. Fisher. I was looking at your web site and saw that you had pre made box designs. I was wondering if these designs also included a cut sheet. If not, can one be purchased? I was looking at the 7 ft slot ported box for two 15's. I am planning on using SSA Icons in this enclosure. Thanks. Also what size of wood is supposed to be used for these designs. Thanks for your help.

So here are the first cuts. I finally had a few minutes in between studying for tests to make some progress. This is a varient if the center port 2-12" box that I had modified to better fit my trunk. I am by no means a wood worker, so don't pick on me too much. I need some assistance with the angles though. I have never done angled ports before, nor have I done a center port. Can anyone from Fisher Customs help me with setting things up? I would greatly appreciate it. If you need me to copy the email so you know the demensions, just let me know. Chris

I need a 1 cube box tuned to 32hz for my single L7 8! Right now its in a .43 sealed.

I've seen a video, with a box made by you guys. I must say... impressive. Do you by any chance, know the dimension used? It was a 15 FI in a Charger and the box was made by FC.

......