Pound That Sound

I am going to build a test box or two before I build the permanent one.... being a personal project material costs don't matter this one is going to be SWEET

here is an enclosure for a single T112D4 2.0cf3 plus sub/port bracing and corner displacements tuned at 34hz

for a single T212D4 I got a bit of sanding ahead but I thought I would do something different

this enclosure is for a pair of 12" IDmax 2.50cf3 per chamber and 30hz tuning

this is a common chamber for a pair of T212D4 subs...2.25cf3 per sub plus displacements tuned at 35hz the baffle is not attached and the port is not finished yet but it's starting to take shape

this is a seperate chamber enclosure for a pair of T112D4 subs 2.0cf3 per chamber plus sub,port and corner displacement

here is some buld pics for an enclosure for a RF T212D4...built to RF's Powerfull Enclosure specks (2.25cf3 plus sub,port,corner displacement) and tuned at 32hz I hate MDF dust...had a lung infection from the stuff last spring so I don't take any chances anymore one of the little tweeks I have been working on.... it will all make sense in the end no 90* edges..all 45* and will be sanded perfectly smooth

I took out the plastic tool box thingy behind the rear seats of the Quad Cab... not much room and the rear wall has a channel brace and tie down loops... :? remove the tie down loops... space is an issuue but he wants this system to pound....he will probably be running ab out 2400w rms a little test fit.... the rear seats will be getting custom brackets...they will be shifted forward and up.... there will be a 4" PVC port coming out each end of the enclosure down low by the floor