Pound That Sound

I am now taking orders for enclosures Contact me via e mail thru my site I can ship COD in Canada but I can not ship COD to the US but I will ship to the US if the customer provides a credit card direct to Canadian Freightways to cover shipping charges all shipments will be crated for Proper protection so there will be a small fee for packaging ** I do not offer designs or blueprints**

this enclosure was built back in 2003 for a pair of JBL W10gti subs and hit a solid 145db in a 4 door sedan...... 1.6cf3 per side (minus sub displacement) tuned at 33hz this thing has been collecting dust for a few years and I'll give it away to anyone who can pick it up or pay shipping (personally I would rather have it picked up) but I will ship it

Have a Fully Loaded Fi BL 12 and its going in the trunk of my 06 Mustang. 32~35 hz, dunno how big exacly yet, no bigger than 2.5, no smaller than 2. Use 12-16 square inches of vent area per cubic foot of volume. Any help?

I ordered (2) SA-10 D4's And a Crescendo BC2000D And A few Shuriken BT-80's, and Some Kicker 0Gauge wire. I NEED A T-line Design For (2) SA-10's please. Or A 4th Order, ORRR A 26Hz Tuning With LOTS of port area Near full potential.

well here is the first Canadian SSA Dcon / PTS Enclosure combo 1.25cf3 plus displacements tuned at 33hz

just a simple sealed enclosure...

i was just wondering if you could fit a 12" FI BL in a box ported tuned to 33Hz and 2.5 CuFt. and also still have some room left. im just making sure i can have some room for stuff. the trunks volume is 12.5 CuFt. (click the link )

this enclosure is for a pair of 12" IDmax 2.50cf3 per chamber and 30hz tuning

A single kerf flared labyrinth port common chamber for a pair of 12" SSA Icons 4.25cf3 plus displacements tuned at 30hz

2.25cf3 plus displacements tuned at 31hz for a 12"SSA Xcon

for a single 12" Xcon 2.25cf3 tuned at 33hz

for a 12" Xcon 2.25cf3 tuned at 30hz

1.75cf3 plus all displacements tuned at 32hz

7.0cf3 plus displacements ,tuned at 14.5hz tripple layer baffle,double layer sides....plate amp and some sweet little OAK feet with slide casters this sucker is gonna be HEAVY when it's done....3 sheets of MDF were used for all the panels

added a custom new banner at the top of the section, hope you like. Even pulled the pigment of orange from your site. Welcome to SSA!

Whats up fellows im a fresh fish on the site. I have been truley amazed and inspired by some of box builds I have seen on this site. I plan to purchase plans for a flared ported 2 12" jl w7 box once I figure out what car I will be buying.In the mean time can anyone with these subs give me any info and experiences they have had with boxes for these subs? All input would be greayly appreciated, trust me. I listen to rap/rock 70/30, but what really low hard hitting clean sounding bass. I will be using an Audiobahn 2300HCT at 1ohm to power them. I know everyone hates audiobahn and I believed them until I went to a comp and heard this amp in an escalade with 3 12"jlw6v2's and …

i have a dodge magnum. i see alot of people building boxes that have the subs firing up and the port towards the rear. ive never heard a car/truck with the box like that. ive always used rear face rear firing boxes. is there a difference? is it noticable if so?

you do some awsome work. just wondering if i could pick your brain on how i can make 4-10" jl w0's fit in a 97 civic sedan. would like ported but will go sealed if i have to. any ideas?

gonna take a shot in the dark but whats the chances of getting a box built for a 95 camaro for a xcon 15. i looked at some boxes on ebay n stuff but scared to try one. taking out the t-top rack will be no problem cause i rarely use it anyway. thanks in advance

hello how long does it take to make a Flared port box on average have you ever made a dual flared ported box? whats the furthest you have ship a box? whats the most used software you use? and were(from who) do you buy your carpet from? you must of work in a cabinet shop in the past? do you do this full time? ( box builder) thanks for your time